Search
355 articles for “Surface condition”
-
Characterization and Optimization of Neem Leaves and Moringa Seed Husk-based Composite Activated Carbon for Efficient Adsorption of Methylene Blue Dye
Abstract: The research in question was meticulously conducted within the premises of the Nigerian Liquefied Gas (NLG) Engineering laboratory, situated at the esteemed University of Maiduguri, Nigeria. This study focuses on the development and characterization of a composite material derived from neem leaves (NL) and Moringa seed husk (MSH) to adsorb methylene blue (MB) dye effluent. The synthesis process involved pyrolyzing MSH and NL at 400°C to produce MSH and NL …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 13, Issue 3, 2023 · pp. 12–22 Read article
-
Atmospheric Boundary Layer Processes: Impacts on Weather Patterns and Climate Change
Abstract: The atmospheric boundary layer (ABL) is a vital component of the Earth's climate system, acting as the interface between the terrestrial surface and the overlying atmosphere. This layer, typically extending from the surface to a height of a few hundred meters, is characterized by strong gradients in meteorological variables such as temperature, humidity, wind speed, and atmospheric pressure. Understanding the dynamics of the ABL is essential for comprehending weather phenomena, …
Published in International Journal of Atmosphere · Vol. 1, Issue 2, 2024 · pp. 22–25 Read article
-
A Comprehensive Analysis of Artificially Roughened Solar Air Heaters
Abstract: The solar air heater is the most cost-effective and popular solar energy harvesting device. It may be used for a variety of tasks, including drying crops, heating rooms, conditioning wood, and curing industrial items. Introducing artificial roughness to surfaces emerges as a highly effective method to augment heat transfer rates within the ducts of solar air heaters. Over the past three decades, research interest has centered on the incorporation of …
Published in Journal of Experimental & Applied Mechanics · Vol. 14, Issue 3, 2023 · pp. 33–43 Read article
-
Mechanical and Tribological Characterization of CaCO3 and CaSO4 Filled CSM-E-Glass Fiber Reinforced Vinyl Ester Composites
Abstract: AbstractIn this paper, mechanical and tribological behavior of the composites under dry sliding wear of vinyl ester matrix reinforced with chopped strand mat (CSM)-E-glass fiber and fillers CaSO4 and CaCO3 sliding against smooth stainless steel counterface (Ra = 0.07 µm) using Taguchi experimental design has been presented. The effects of sliding velocity (1.57, 2.62 and 3.67 m/s), normal load (20, 40 and 60 N), filler content (0, 10 and 20 …
Published in Journal of Polymer & Composites · Vol. 1, Issue 3, 2013 · pp. 13–31 Read article
-
Experimental Demonstration on Microfluidic Capillary Flow of Red Dye in Photoresist based Glass Microfluidic Devices
Abstract: In this experimental work, a set of three individual SU-8 based glass microfluidic devices are fabricated by maskless lithography and indirect bonding technique in leakage-free conditions. Commercially available red coloured food dye is used as the selected working liquid. The microfluidic leakage in other set of two leaky microfluidic devices is experimentally demonstrated. Microfluidic devices should be fabricated at leakage-free conditions to achieve exact fluid flow characteristics. The effect of …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 7, Issue 1, 2020 · pp. 1–7 Read article
-
Lobulated Tongue- A Rare Devlopmental Anomaly
Abstract: Lobulated tongue is a relatively uncommon congenital anomaly characterized by one or multiple elevations and/or indentations on the edge or surface of the tongue, resulting in an irregular contour. This condition is considered a rare occurrence in the spectrum of human congenital anomalies, and it may present as an isolated case or be associated with syndromes, co-existing with hamartomas or teratomas.Various syndromes have been identified in association with lobulated tongue, …
Published in Research and Reviews: A Journal of Dentistry · Vol. 14, Issue 3, 2023 · pp. 31–34 Read article
-
Optimization Study on Cr (VI) Removal by Response Surface Methodology using Artemia franciscana
Abstract: Response Surface Methodology was employed in the present investigation to obtain the optimized physical condition for the removal of Cr (VI) from the aqueous solution. The pH was varied from 8–12 and the salinity from 30–50‰. The pH of 10 and salinity 40‰ was found to be optimized physical condition for the 95% of Cr (VI) removal from the aqueous solution using Artemia franciscana by the process of bioaccumulation. Keywords: …
Published in Research and Reviews : Journal of Computational Biology · Vol. 7, Issue 1, 2018 · pp. 15–21 Read article
-
Psychometric Analysis of an Induced Cooling Tower in a Humid Condition
Abstract: An Induced Cooling Tower (ICT) is an energy transformation device that facilitates heat and mass transfer by leveraging ambient conditions. ICTs are particularly effective in applications requiring a large heat transfer surface area, utilizing evaporative cooling of ambient air to cool hot steam. The performance of an ICT is significantly influenced by ambient humidity and temperature, making these environmental factors critical in its design and operation. As such, ICTs are …
Published in Journal of Thermal Engineering and Applications · Vol. 12, Issue 3, 2025 · pp. 22–29 Read article
-
Enhancement of Thermo-hydraulic Properties of a Novel Composite-Based Spiral Fin Tube Heat Exchanger: An Experimental Investigation
Abstract: It is now crucial for engineers to enhance procedures and boost heat exchanger efficiency. Heat exchanger performance can be significantly enhanced by a variety of methods. Composite-based fins or enlarged surfaces are frequently utilized to increase the air-side heat transfer rate in a variety of heat transfer applications. Because composite materials are lightweight, highly thermally conductive, and resistant to corrosion, they were used. A composite based fin's efficiency is influenced …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 238–251 Read article
-
Mechanical Characterization of Prosopis Juliflora Fibre-Reinforced Epoxy Composites for Sustainable Automotive Applications
Abstract: This study investigates the potential of Prosopis juliflora (PJ) fibre as an eco-friendly, economical, and mechanically efficient reinforcement for epoxy-based polymer composites. Composite samples were produced using the compression moulding technique with epoxy-to-fibre weight ratios of 90:10, 85:15, and 80:20. Mechanical tests, including tensile, flexural, impact, and hardness evaluations, were conducted in accordance with relevant ASTM standards. The incorporation of PJ fibre resulted in significant improvements in the mechanical behaviour …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1720–1728 Read article
-
Managing Pavement Settlement Risk: Impact of Waterlogging and Soil Conditions
Abstract: In the context of road infrastructure, the occurrence of waterlogging due to rainfall can have significant repercussions. Rainwater often infiltrates the road surface and, depending on factors such as the depth of the foundation and the extent of penetration into the ground, can lead to the soil beneath the road becoming either moist or saturated. This, in turn, can result in a reduction of the soil's bearing capacity. When vehicles …
Published in Trends in Transport Engineering and Applications · Vol. 10, Issue 2, 2023 · pp. 45–50 Read article
-
Study of Electrochemical and Mechanical Properties of Graphene/HAp Composite Coating on Ti-13Nb-13Zr Alloy via Electrophoretic Deposition for Biomedical Application
Abstract: Titanium-13niobium-13zirconium alloy has widespread potential in biomedical applications due to its high degree of biocompatibility, favourable mechanical properties, high corrosion resistance, and high possibility of osseointegration. The surface was improved by electrophoretic deposition method using hydroxyapatite and graphene (5 g nanoHAp) (5 g nanoHAp+0.06 nanoGr) and suspended in ethanol solution at different conditions of time (1, 3, and 7 minutes) and voltage (50, 70, and 100 V). The effect of …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 91–106 Read article
-
An Analytical Model for Sub grid Force-Equilibrium Approach in Submerged Vegetative Channel
Abstract: A new, analytical model of the vertical flow velocity profile of submerged vegetation has been developed. Velocity profile can be divided into three zones: linear zone which is closed to bed with linear velocitydistribution, logarithmic zone which involves the main channel without vegetative cover and the middle zone (transition zone) that is affected by the momentum of upper zone. For the surface layer, Prandtl’s mixing lengthconcept is adopted resulting in …
Published in Recent Trends in Civil Engineering & Technology · Vol. 1, Issue 1-3, 2011 · pp. 1–7 Read article
-
Preparation of Phase – Pure Nanocrystalline Anatase and Rutile TiO2 using Hydrolysis of TiCl4 in presence of surfactants
Abstract: Hydrolysis of TiCl4 was carried out in two different ways to prepare nano crystalline TiO2. In the first method the hydrolysis of TiCl4 was carried under high acidic conditions at low temperature. In the second method hydrolysis was carried out using (NH4)2SO4 as an additive. It can be seen that the hydrolysis of TiCl4 under high acidic conditions promotes the growth of rutile phase of TiO2, where as hydrolysis in …
Published in Journal of Materials & Metallurgical Engineering · Vol. 8, Issue 1, 2018 · pp. 31–40 Read article
-
Enhancement of Horizontal Jet Impingement Heat Transfer Analysis on Vertical Flat Plate
Abstract: This research investigates the heat transfer characteristics and heat flux distribution associated with parallel jet impingement on a vertical flat plate. A comprehensive computational fluid dynamics (CFD) analysis is carried out and systematically validated against available experimental data to ensure the accuracy and reliability of the numerical model. The jet length is maintained constant at 12 mm, while the jet-to-plate separation distance is varied at 6, 12, 18, and 24 …
Published in Journal of Experimental & Applied Mechanics · Vol. 17, Issue 1, 2026 · pp. 65–80 Read article
-
ADAPTIVE STREET ILLUMINATION SYSTEM WITH ENERGY HARVESTING
Abstract: This paper presents an Adaptive Street Illumination System with Energy Harvesting, developed using an Arduino Uno microcontroller, Light Dependent Resistor (LDR), Infrared (IR) motion sensors, and piezoelectric transducers. The system addresses the significant energy wastage of conventional street lighting by activating LEDs only when motion is detected during nighttime. The LDR detects ambient light to determine day or night conditions, while IR sensors identify the presence of vehicles or pedestrians. …
Published in International Journal of Electronics Automation · Vol. 4, Issue 1, 2026 Read article
-
Thermodynamic Analysis and Slow Pyrolysis Product Characterization are Used to Assess Rice Straw for Bio-char Production
Abstract: This work explores the viability of using slow pyrolysis to produce bio-char using rice straw as a feedstock. The objective is to characterize the resulting bio char and analyse the thermodynamic processes involved in its formation. Rice straw, an abundant agricultural residue, was subjected to slow pyrolysis under controlled conditions. The produced bio char was characterized using various analytical techniques, including scanning electron microscopy, elemental analysis, and surface area measurements. …
Published in Research & Reviews : Journal of Agricultural Science and Technology · Vol. 13, Issue 2, 2024 · pp. 26–29 Read article
-
Recent Development to Track Contraband using Muon
Abstract: The muon is one of nature’s fundamental particles discovered in 1937 by Carl Anderson. A muon is an elementary subatomic particle similar to electron, but with a mass approximately 207 times greater and, sometimes it is called as a “heavy electron”. Muons are generated naturally when cosmic rays collide with atoms in earth’s upper atmosphere and, then raining down all the times upon the surface of earth. Muons can be …
Published in International Journal of Universe · Vol. 2, Issue 1, 2026 · pp. 23–34 Read article
-
Computer Aid for Stability Testing Between Parts towards Automatic Assembly Sequence Generation
Abstract: AbstractStability is one of the most essential criteria to be ensured during assembly sequence generation (ASG). The stability predicate ensures stable assembly subsets for sub-assembly detection and parallel assembly process. In this paper a novel method to represent assembly stability using four point scales is proposed. Mechanical equilibrium conditions are used to test the partial stability of the parts effectively. Part surface features and contact with attachments are considered to …
Published in Journal of Computer Technology & Applications · Vol. 7, Issue 1, 2016 · pp. 22–26 Read article
-
Finite Element, Experimental, and Machine Learning-Based Optimization of Machining Stability for Polymer Composite Material Processing
Abstract: The machining of polymer composite materials, particularly fibre-reinforced polymer-matrix composites, requires stable spindle-tool performance to avoid delamination, fibre pull-out, matrix cracking, thermal softening, poor surface integrity, and premature tool wear. In line with the scope of the Journal of Polymer & Composites, this study presents an integrated finite element, experimental, and machine learning framework for improving machining stability during end-milling of composite material systems. The spindle-tool assembly is modelled using …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article