Search
167 articles for “Engine parameters”
-
Numerical Simulation of Crack Growth in Dynamic Loading Conditions
Abstract: Because it is crucial for forecasting structural failures in engineering applications, crack formation in materials under dynamic loading circumstances has become a crucial study topic. In this work, finite element methods (FEM) are used to numerically simulate fracture propagation in dynamic stress situations. The impact of loading rates, material characteristics, and crack geometries on crack growth patterns are assessed in a thorough parametric research. The work uses sophisticated computational methods …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 2, Issue 2, 2024 · pp. 30–34 Read article
-
Effect of Sinusoidal and Inverse sinusoidal Load on the Vibration and Buckling Behaviour of Laminated Composite Symmetrical and Unsymmetrical Trapezoidal Panels
Abstract: Using finite element (FE) techniques, this work analyzes the influence of sinusoidal and invers sinusoidal stresses on the buckling behavior of trapezoidal laminated composite panels (also known as trapezoidal laminated composite panels). The discretization of the composite panel is accomplished by the use of an eight-noded iso-parametric plate element, which has five degrees of freedom for each node. Due to the incorporation of Higher Order Shear Deformation Theory (HOSDT) into …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 Read article
-
Effect Of Sinusoidal and Inverse Sinusoidal Load on The Vibration and Buckling Behaviour of Laminated Composite Symmetrical and Unsymmetrical Trapezoidal Panels
Abstract: Using finite element (FE) techniques, this work analyzes the influence of sinusoidal and inverse sinusoidal stresses on the buckling behavior of trapezoidal laminated composite panels (also known as trapezoidal laminated composite panels). The discretization of the composite panel is accomplished by the use of an eight-noded iso-parametric plate element, which has five degrees of freedom for each node. Due to the incorporation of Higher Order Shear Deformation Theory (HOSDT) into …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 72–84 Read article
-
Biopolymer-Based Nanoparticles: Advances in Fabrication, Characterization, and Biomedical Applications
Abstract: The emergence of biopolymer-based nanoparticles, particularly those composed of proteins and polysaccharides, has significantly transformed the landscape of biocompatible and biodegradable materials. These nanoparticles offer immense potential due to their ability to facilitate encapsulation and targeted delivery of bioactive compounds, enhancing therapeutic efficacy while minimizing side effects. This review explores the various fabrication techniques, including emulsification, desolvation, coacervation, and electrospray drying, emphasizing their advantages and limitations. The characterization of nanoparticles …
Published in International Journal of Photochemistry and Photochemical Research · Vol. 3, Issue 1, 2025 · pp. 38–46 Read article
-
Simulation and Experimental Analysis of Heat Treatment for Steel Tie Rods: A Review
Abstract: The study is related to the actual heat treatment and simulation of the physical deformation of the steel tie rod and compares the observations for process optimization. The general methodology is to go for either traditional or induction hardening after getting the chemical composition of the material, followed by tempering, which is a key technique for improving the mechanical properties of materials, strength, hardness, etc., and to release stresses. This …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 3, Issue 1, 2025 · pp. 43–51 Read article
-
Study on the Variations in Physicochemical Property Concentration in a Contaminated Fresh and Salt Water
Abstract: In this research, the dispersion of crude oil contaminated was subjected into laboratory observations and results were recorded. These results were used to develop and adopt mathematical models for a proper engineering experimental practice. 1.5m3 volumes of fresh water and salt water were filled in two tanks of equal fit at the same intervals along the tanks and depth, where samples were collected for the purpose of analysis of physicochemical …
Published in International Journal of Pollution: Prevention & Control · Vol. 1, Issue 2, 2023 · pp. 1–9 Read article
-
Tropospheric Variation of Point Refractivity Gradient and Geo-climatic Factor over a Coastal Location in Tropical Nigeria
Abstract: Accurate assessment of refractivity gradient and Geo-climatic factor is crucial for maintaining reliable radio signal propagation in clear-air environments. These parameters are essential for determining the fade margin necessary to ensure a stable and effective wireless radio link, given the unstable nature of the atmosphere through which the signals travel. It is crucial to have accurate knowledge of these characteristics, particularly at microwave antenna heights of around 70 meters, in …
Published in Journal of Remote Sensing & GIS · Vol. 15, Issue 2, 2024 · pp. 28–42 Read article
-
Static and Dynamic Analysis of Conventional, Diagrid and Hexagrid Systems Across Different Storey Heights
Abstract: In structural engineering, multi-storey buildings’ seismic resilience in earthquake-prone areas is crucial. The seismic performance of proposed multi-story buildings with different heights (G+13, G+19, and G+27) is thoroughly examined in this study using traditional structural systems that are octagrid and hexagrid. Under seismic zone III conditions, the study evaluates important parameters such as storey drifts and storey displacements using the Response Spectrum Method. Each structural system's seismic response is assessed …
Published in Journal of Offshore Structure and Technology · Vol. 12, Issue 2, 2025 · pp. 36–47 Read article
-
Machine Learning Framework for Optimizing Polymer–Metal Oxide Composites as Charge Selective Layers in Perovskite Solar Cells
Abstract: To achieve high-performance and stability of perovskite solar cells (PSCs), it was important to incorporate innovative interfacial materials to tune the balanced charge extraction, low recombination, and enhanced operational lifespan. On this note, polymer composites with metal oxides have been proposed as promising candidates as charge selective layers (CSLs), whereby they present a rare combination of tunable energy levels, improved film forming abilities, and better interface engineering capabilities. In this …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1073–1098 Read article
-
A Review on Predicting Wear and Friction of PTFE Composites - Fillers to Machine Learning Models
Abstract: Polytetrafluoroethylene (PTFE) composites, a self-lubricating material with low friction, became an indispensable material in engineering applications where load carrying capacity and wear are crucial. The pure PTFE has poor mechanical strength and wear resistance which can be enhanced by the addition of fillers in appropriate volume fraction. The wear performance is dependent on various factors such as fillers, operating parameters, environmental conditions as well as manufacturing attributes. This makes the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 114–128 Read article
-
Experimental and Process Optimization Study on Thermal Stress Reduction in TiC–Steel Brazed Joints Using Polymer-Derived Composite Interlayers
Abstract: In this, an experimental investigation aimed at reducing crack formation due to thermal stress in TiC-steel brazed joints through optimization of key process parameters is presented. The primary objective was to develop an integrated and reliable brazing strategy by examining the effects of filler material selection, brazing gap, cooling conditions and type of flux. In this study, polymer-derived composite interlayers were developed through controlled synthesis and nanocomposite engineering to mitigate …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 524–540 Read article
-
A Review on Parametric Optimization of WEDM Technique for OHNS Steel
Abstract: In this study, the Wire Electrical Discharge Machining (WEDM) process for OHNS (Oil Hardened Non-Shrinking) steel, a high-performance material frequently used in the production of dies, punches, and precision tooling components, is optimized parametrically and validated experimentally. A continuously moving wire electrode and a sequence of electrical discharges are used in WEDM, a non-traditional machining method, to erode material and produce intricate and precise profiles, particularly in materials that are …
Published in Trends in Mechanical Engineering & Technology · Vol. 15, Issue 2, 2025 · pp. 29–35 Read article
-
Development and Mechanical Characterization of Hybrid Natural Fiber-Reinforced Polymer Matrix Composites for Structural Applications
Abstract: The growing demand for sustainable, lightweight, and cost-effective materials in engineering has driven significant interest in natural fiber-reinforced polymer composites (NFRPCs). Among various options, hybrid composites combining two or more natural fibers offer a balanced improvement in mechanical properties while maintaining environmental benefits. This study investigates the fabrication and mechanical performance of jute–hemp fiber-reinforced epoxy composites. Specimens were prepared using the hand lay-up technique followed by compression molding to ensure …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1181–1189 Read article
-
Polymer-Inspired Underwater Friction Stir Welding of Aluminum–Copper Composite Joints
Abstract: The problem of high-performance dissimilar joints and their compatibility with polymer and composite engineering applications is the impetus to the current work. This paper seeks to investigate the possibility of applying the polymer-based composite ideas with underwater friction stir welding (UWFSW) to improve the performance of AA5083 aluminumcopper joints. To achieve this a systematic experimental method was followed by varying the tool rotational speed, traverse speed and tilt angle and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 372–383 Read article
-
An AI-Driven IoT Framework for Autonomous Quality Assurance in Optical Lens Manufacturing
Abstract: The evolution of high-precision optics—ranging from smartphone micro-lenses to high-end astronomical glass—demands unprecedented accuracy in manufacturing. Traditional inspection methods, reliant on manual sampling or static automated optical inspection (AOI), often fail to bridge the gap between high-speed production and the detection of microscopic surface aberrations. This paper introduces an integrated architecture combining the Internet of Things (IoT) and Deep Learning-based decision-making systems to revolutionize lens quality control. By deploying an …
Published in International Journal of Optical Innovations & Research · Vol. 4, Issue 1, 2026 · pp. 36–41 Read article
-
Enhancing Worker Comfort in High-Heat Environments: A Triangular Bladeless Cooling Fan Approach
Abstract: Workers in high-heat industrial environments frequently encounter thermal stress, fatigue, and dehydration, which significantly impact both productivity and safety. Existing cooling solutions such as pedestal fans, ceiling fans, and central air-cooling systems often fall short due to limited airflow reach, safety concerns from exposed blades, high energy consumption, and poor suitability for dynamic workshop layouts. To address these challenges, this study presents a novel triangular bladeless fan designed specifically for …
Published in Trends in Mechanical Engineering & Technology · Vol. 15, Issue 3, 2025 · pp. 25–31 Read article
-
Comparative Study of the Mechanical and Durability Performance of Interlocking Concrete Pavement Blocks
Abstract: Interlocking concrete pavement blocks (ICPBs) have emerged as a durable, modular, and sustainable alternative to traditional pavement systems. Their performance depends heavily on the mechanical characteristics of the concrete mix, block geometry, compaction technique, and curing conditions. This review compiles and analyzes research findings related to the strength, durability, structural behavior, and long-term performance of ICPBs produced using traditional and modified concrete mixes. Key parameters evaluated include compressive strength, split …
Published in Trends in Transport Engineering and Applications · Vol. 13, Issue 1, 2026 · pp. 24–30 Read article
-
Design and Manufacturing of Suspension and Steering System of a F3 Vehicle
Abstract: The suspension and steering systems are critical subsystems of any formula-style racing vehicle, directly influencing its stability, handling, and driver safety. This paper focuses on the design, analysis, and manufacturing of suspension and steering systems for a Formula Student F3 vehicle. The primary objective is to develop a lightweight, reliable, and efficient design that complies with Formula Student competition rulebooks while ensuring optimum ride quality and performance. Using advanced computer-aided …
Published in Trends in Mechanical Engineering & Technology · Vol. 15, Issue 3, 2025 · pp. 1–12 Read article
-
Aerodynamic Effects of Wind on Multi-Story Structures: A Height- and Terrain-Based Analysis
Abstract: Wind loads are a critical consideration in the structural design of buildings, with direct implications for safety and serviceability. This study investigates the aerodynamic behavior of reinforced cement concrete (RCC) buildings under varying heights and terrain conditions, in accordance with IS: 875 (Part 3): 2015. 12 structural models representing 20 m, 35 m, and 50 m tall buildings were analyzed using extended three-dimensional analysis of building system (ETABS) across four …
Published in Journal of Offshore Structure and Technology · Vol. 12, Issue 3, 2025 · pp. 1–14 Read article
-
Geotechnical Analysis and Performance Evaluation of Subgrade Materials in Road Construction
Abstract: Geotechnical engineering plays a pivotal role in the design, construction, and long-term maintenance of infrastructure, particularly in road construction, where subgrade conditions are directly linked to pavement performance, durability, and overall structural integrity. The performance of a road is heavily influenced by the geotechnical properties of the subgrade, making it essential to thoroughly assess these properties in the planning and construction phases. This study comprehensively investigates the geotechnical characteristics and …
Published in Journal of Geotechnical Engineering · Vol. 11, Issue 3, 2024 · pp. 24–29 Read article