Search
118 articles for “Cracks”
-
Characterization of Nano-Clay Reinforced Polymer Composites: Enhancing Performance for Extreme Applications
Abstract: This study investigates the mechanical, thermal, water absorption, and chemical resistance properties of nano-clay-reinforced polymer composites and polymer concrete. The incorporation of 1-5 wt% nano-clay resulted in a significant enhancement across all properties. Mechanical testing revealed a 42.86% increase in tensile strength (35 MPa to 50 MPa), 40% improvement in flexural strength (50 MPa to 70 MPa), and 46.67% rise in compressive strength (75 MPa to 110 MPa), attributed to …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 105–114 Read article
-
Influence of Supplementary Cementitious Materials on Chemical Shrinkage in Cement
Abstract: Chemical shrinkage is the volume reduction observed in cement during early hydration due to chemical reactions, which critically influences the internal stresses, cracking tendencies, and durability of cementitious system. Present study is focused on effect of supplementary cementitious material (SCM) on chemical shrinkage. Dilatometry method is used to assess the impacts of SCMs on chemical shrinkage, in this this study. The research incorporates experiments with laboratory-synthesized cement and three SCMs—fly …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 98–107 Read article
-
Investigating Flexural Behavior in Cyclic Loading of Fly Ash-Based Green Concrete
Abstract: The construction industry is increasingly embracing sustainable materials, and geopolymer concrete (GPC) has emerged as a promising eco-friendly alternative to Ordinary Portland Cement (OPC). Derived from industrial by-products such as fly ash, GPC offers significant environmental advantages by reducing greenhouse gas emissions associated with conventional cement production. This study explores the monotonic and cyclic performance of fly ash-based GPC, with a focus on its mechanical and structural behavior. Key properties, …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 1, 2025 · pp. 1–5 Read article
-
Investigating the Surface Defects and Structural Integrity of 3D Printed Hydrogen Storage Cylinders in UAV Applications
Abstract: This research explores the processing and manufacturing challenges of 3D printed polymer composites for high-pressure hydrogen storage in UAVs. The study focuses on addressing surface integrity and structural robustness issues inherent in additive manufacturing. Finite Element Analysis (FEA) was conducted on four thermoplastic polymer ABS, PET-G, HDPE, and Nylon to assess their mechanical performance under 35 MPa of pressure. Results revealed that PET-G and ABS provided better stress distribution and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 161–191 Read article
-
High-Performance Aluminum Matrix Composites Reinforced with Graphene Nanoplatelets a Study on Mechanical and Thermal Behaviour
Abstract: This study investigates the effect of graphene nanoplatelets (GNPs) on the mechanical and thermal properties of aluminum matrix composites (AMCs) fabricated using the powder metallurgy route. Aluminum alloy Al-6061 powder was reinforced with varying GNP concentrations (0, 0.5, 1, 2, and 3 wt%), followed by uniaxial compaction and sintering. The influence of GNP content on the composite’s structural integrity, strength, and thermal behavior was thoroughly evaluated through tensile testing, hardness …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 38–49 Read article
-
Performance Evaluation of Semi-Dense Bituminous Macadam with Crumb Rubber Modified Bitumen
Abstract: This research focuses on evaluating the performance behavior of Semi-Dense Bituminous Macadam (SDBM) mixes incorporating 9% Crumb Rubber Modified Bitumen (CRMB), with varying proportions of bitumen binder. The aim is to understand how different binder contents influence critical pavement properties such as Marshall stability, flow value, bulk density, air voids, Voids in Mineral Aggregate (VMA), and Voids Filled with Bitumen (VFB). The experimental investigation reveals that increasing the bitumen content …
Published in Journal of Construction Engineering, Technology & Management · Vol. 15, Issue 2, 2025 · pp. 15–20 Read article
-
A Comprehensive Examination of the Compressive Test Results of Concrete Formulations Modified by The Insertion of Ceramic Powder and High-Density Polyethylene Illustrates Nuanced Changes in the Structural Performance Attributes of the Resultant Composite Materials
Abstract: It is becoming crucial to transition from a traditional, utilization-based society to a sustainable one, resulting of the decline in the natural environment, depletion of natural resources, and decreased capacity for final waste disposal. As the populatio grows, so will the demand for concrete. The major goal of this research is to look at the possible technical benefits of using extruded recycled high-density-polyethylene (HDPE) fibers into structural concrete. The mechanical …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 193–205 Read article
-
Influence of Alkali Treatment on the Tensile Properties of The Hybrid Fiber Reinforced Polymer Matrix Composite
Abstract: In this study, the effect of alkali treatment on the tensile strength of the hibiscus fiber, gongura fiber, and treated madar fiber-reinforced Polymer Matrix Composite (PMC) is studied. The Sodium Hydroxide (NaOH) solution is utilized for madar fiber treatment. The traditional hand layup methodology was used for fabrication. The influence of tensile property control variables such as duration of fiber treatment, concentration of NaOH for treatment, and proportion of fiber …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 28–34 Read article
-
Comparative Review of Innovations in Self-Compacting Concrete (SCC) Technologies
Abstract: Self-compacting concrete (SCC) is a revolutionary material in contemporary construction, with better workability and lower labor requirements without any sacrifice in strength or durability. The latest advances have been in terms of furthering its environmental and performance attributes by using different materials and methods. One of them is substituting ordinary Portland cement with high-volume fly ash and calcined calcium carbonate (BCC), cutting CO₂ emissions by as much as possible while …
Published in Journal of Construction Engineering, Technology & Management · Vol. 15, Issue 3, 2025 · pp. 99–103 Read article
-
Role of Fatigue and Creep in Structural Damage: A Comprehensive Review
Abstract: Fatigue and creep are two critical degradation mechanisms that significantly influence the structural integrity and longevity of engineering materials. These phenomena arise due to different loading and environmental conditions but often coexist in various industrial applications, leading to severe material degradation over time. Fatigue primarily results from cyclic loading, where repeated stress variations induce microstructural damage and crack initiation, ultimately causing catastrophic failure. Conversely, creep occurs under sustained stress at …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 3, Issue 1, 2025 · pp. 22–26 Read article
-
AI-Assisted Defect Detection in Polymer Composite Insulators Using an Optimised Ensemble Deep Learning Framework for Structural Health Monitoring
Abstract: Polymer composite insulators, particularly those made from silicone rubber and epoxy resins, are increasingly adopted in high-voltage transmission systems due to their superior electrical insulation, lightweight design, hydrophobicity, and environmental durability. Despite their advantages, these materials are susceptible to surface degradation, mechanical cracking, and flashover under prolonged exposure to environmental pollutants, thermal stress, and electrical aging. Accurate, real-time condition assessment of these composite insulators is critical for ensuring operational safety, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 253–261 Read article
-
Study of Evaluating the Feasibility of Banana Stem Fibers and Sugarcane Husk as a Sustainable Additive in Pervious Concrete for Urban Pavements
Abstract: This study explores the integration of eco-friendly materials: banana stem fibers and sugarcane husk, into pervious concrete to enhance its mechanical properties while maintaining high permeability. The research addresses environmental concerns related to agricultural waste disposal and the resource-intensive nature of traditional construction materials. Banana stem fibers, known for their tensile strength and durability, and sugarcane husk, rich in lignin and cellulose, were selected as reinforcements. The fibers were extracted, …
Published in Trends in Transport Engineering and Applications · Vol. 12, Issue 2, 2025 · pp. 33–39 Read article
-
Optimizing Mechanical Properties of Polypropylene Fibre-Reinforced Coconut Shell Concrete
Abstract: This study investigates the impact of polypropylene (PP) fibre reinforcement on the mechanical properties of coconut shell (CS) concrete. The compressive strength of CS concrete is primarily governed by the strength of CS aggregates, with early-age failure attributed to poor bonding and later-stage failure influenced by aggregate strength. The incorporation of PP fibres significantly enhanced compressive, tensile, and flexural strength. At 28 days, compressive strength increased by 1.2–3.45% in CSF …
Published in Recent Trends in Civil Engineering & Technology · Vol. 15, Issue 2, 2025 · pp. 6–12 Read article
-
Performance Evaluation of Concrete with Binary and Ternary Blends of Fly Ash, Silica Fume, and Fiber Reinforcement
Abstract: This study evaluates the effect of ground granulated blast furnace slag (GGBS) as a partial replacement for cement on the mechanical properties of concrete, focusing on compressive and split tensile strength. Concrete mixes were prepared with GGBS replacement levels of 0%, 25%, and 50% and subjected to different curing methods, including water curing, steam curing, and conceal curing. These curing methods were selected to investigate their impact on hydration, strength …
Published in Journal of Construction Engineering, Technology & Management · Vol. 15, Issue 3, 2025 · pp. 40–45 Read article
-
Finite Element Modelling of Contact Stresses in Helical Gear Systems
Abstract: Helical gears are widely used in modern power‐transmission systems because of their high load‐carrying capacity, smooth meshing action, and increased overlapping of gear teeth. However, the design of helical gear pairs is constrained by contact stresses generated at the mating tooth surfaces, which can lead to surface fatigue (pitting), micro-cracking, and ultimately gear failure. Traditional analytical methods, such as those of the American Gear Manufacturers Association (AGMA) or International Organization …
Published in Trends in Machine design · Vol. 12, Issue 3, 2025 · pp. 35–39 Read article
-
Enhancement of Mechanical Properties in Hemp Fiber-Reinforced Epoxy Composites Using Graphene Nanoplatelets
Abstract: This study investigates how incorporating graphene nanoplatelets (GNPs) influences the mechanical performance of hemp fiber–reinforced epoxy composites. Hemp fibers were chemically treated by alkali treatment to improve fiber–matrix adhesion owing to their high specific strength, stiffness, renewability, and environmental friendliness. Graphene nanoplatelets were dispersed in acetone by probe sonication and added to acetone epoxy matrix at a concentration of 0.5 wt% and 1.0 wt%, respectively. Composite laminates were prepared by …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 98–109 Read article
-
Mechanical Characterization of Kevlar 49 and Pina Fiber Hybrid Composites
Abstract: The pursuit of sustainable yet high-performance materials has accelerated research into hybrid composites that combine synthetic and natural fibers. This study investigates the fabrication and characterization of a Kevlar 49/Pina fiber hybrid composite using epoxy resin as the matrix. Kevlar 49, known for its exceptional tensile strength and energy absorption, was employed as the face sheet material, while Pina fiber, a biodegradable reinforcement extracted from pineapple leaves, was incorporated as …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 301–316 Read article
-
Sustainability and Mechanical Performance Evaluation of Cementitious Composites Reinforced with Waste Rubber Aggregates and Ground Granulated Blast Furnace Slag
Abstract: The development of environmentally responsible composite materials has gained global momentum with the shift toward circular and sustainable construction practices. In this work, the performance of cementitious composites that partially substitute natural fine and coarse aggregates with recycled rubber aggregates from end-of-life tires and Ground Granulated Blast Furnace Slag (GGBS) as an additional cementitious material is examined. A total of thirty composite mixes were formulated by varying GGBS (10–30%) and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1164–1180 Read article
-
Comprehensive Review of Composite Materials: Classification, Manufacturing Methods, Mechanical Behavior, Failure Modes, and Emerging Applications
Abstract: Composite materials have emerged as one of the most significant classes of engineered materials due to their ability to deliver high strength to weight ratios, enhanced durability, and tailored multifunctionality. Over the past two decades, rapid progress in polymer chemistry, advanced reinforcement architectures, additive manufacturing, and automated fabrication has expanded the applicability of composites across aerospace, automotive, biomedical, civil, and renewable energy sectors. This paper provides a comprehensive review of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 923–939 Read article
-
Grey Relational Analysis of Cuttlefish Bone Particles–Glass Fiber Reinforced Epoxy Composites
Abstract: This research examines the mechanical characteristics, water absorption performance, and thermal stability of epoxy composites reinforced with Cuttlefish Bone Particles (CFBP) and glass fibers. Composites were fabricated with varying CFBP contents (0%, 3%, 6%, 9%, and 12%) using an epoxy resin as the matrix material and glass fiber as the primary reinforcement. The experimental results revealed that the CFBP-0 composite (neat epoxy with glass fiber) exhibited the highest tensile strength, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 239–246 Read article