Search
185 articles for “Coating”
-
Critical Review on Photocatalytic Polymer Nanocomposites for Indoor Air Purification in Hotels
Abstract: The indoor air quality has become a key measure of health, comfort, and customer satisfaction of a hospitality setting. The challenges that continually affect hotels especially because of volatile organic compounds (VOCs), particulate matter, and microbial pollutants that are present in cleaning agents, furnishing, and human activity. In this regard, the photocatalytic polymer nanocomposites are one of the sustainable and efficient means of purifying indoor air. These materials combine photocatalysts …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 527–541 Read article
-
Intelligent Optimization of Drilling Parameters in Polymer Composites using Machine Learning and Metaheuristic Techniques
Abstract: The study tests different ways to use ML and metaheuristic algorithms to determine the best drilling parameters for polymer matrix composites. The research uses a composite matrix made from 55.25% vinyl ester, 44.0% Nickel–Phosphorous coated glass fiber and 0.75% Al₂O₃ nanowires which are tested for tensile strength (64.57 MPa), flexural strength (85.86 MPa) and impact strength (71.79 kJ/m²). By applying a Taguchi orthogonal array, it is observed that a slower …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1795–1810 Read article
-
Bonding Strength Characteristics of FRP Cylindrical Composites Under Hygrothermal Loading
Abstract: This study investigates the bonding strength characteristics and stress distribution patterns in fiber-reinforced polymer (FRP) cylindrical composites subjected to hygrothermal loading conditions. A four-phase cylindrical model incorporating AS-Graphite and S-Glass fibers with low modulus epoxy coating was analyzed under four distinct pressure loading conditions (25.984, 38.976, 77.953, and 155.906 MPa). Comprehensive stress analysis revealed significant variations in von-Mises stress, maximum principal stress, and minimum principal stress across fiber, coating, matrix, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 950–967 Read article
-
Minimum Energy Criteria for Machining to Determine Energy-Productivity Relationship
Abstract: In this research segment, cutting rates were changed while depth of cut and feed rate remained fixed. The results of cutting using a standard uncoated carbide insert were compared. Cutting speeds were maintained at a constant. After determining the optimal cutting condition for the equipment and material. To determine optimal tool life and cutting speed, turning operations were performed. In industrial cutting operations, flank wear reduces tool life. For single-point, …
Published in Journal of Polymer & Composites · Vol. 11, Issue 4, 2023 · pp. 81–94 Read article
-
Analysis of C45 Steel Machining with Differentiated Tool Bits
Abstract: The tool material may be coated or uncoated, and cutting inserts are typically situated along the covered contact region. Work piece remains fixed while tool revolves for cutting and machining. Objective: A NABL-accredited metallurgical evaluation laboratory (machining) assessed two specimens. Machining profile and materials determine insert selection. Analytical results show material composition. The surface qualities of samples 1 and 2 were examined. As DOC, cutting speed and tool tip temperature …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 244–252 Read article
-
Polymer Composite Mapping: Analyzing Land Use/Land Cover Changes in Mathura District, Uttar Pradesh, India
Abstract: Polymer-based mapping approaches are utilized in this study to improve the accuracy and consistency of LULC classification. Utilizing the special qualities of polymers like their elasticity, robustness, and adaptability, we create a strong framework for mapping LULC dynamics. Over the past few years, the district of Mathura in the state of Uttar Pradesh has experienced substantial expansion and development. This study assessed the change detection and estimated the shift in …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 662–667 Read article
-
Wear and Tribological Characteristics of Novel Metal Matrix Composites
Abstract: The development of advanced metal matrix composites (MMCs) with enhanced tribological performance has become increasingly important due to the premature failure of critical engineering components operating under severe wear conditions in automotive, aerospace, marine, defense, and power generation systems. Conventional composites such as Copper–Alumina and Aluminium–Silicon Carbide have demonstrated improved mechanical and wear characteristics; however, their widespread application is often limited by issues including particle agglomeration, non-uniform reinforcement distribution, porosity …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1326–1346 Read article
-
Synthesis of YSZ nanopowders by using PVA-metallic nitrate combustion method
Abstract: Yttria-stabilized zirconia (8YSZ) powder is widely used as a thermal barrier coatings material for various aeronautical gas turbine engine components and structures operating in high temperature environment as well as for the nozzle of solid rocket engine due to its relatively high thermal expansion coefficient, thermal reflectivity, low thermal and good corrosion resistance. The synthesis of single or composite metal oxides by combustion of metal-polyvinyl alcohol gel precursors (Me-PVA) has …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 14, Issue 3, 2024 · pp. 24–32 Read article
-
Enhancing Delamination Resistance in CFRP Composites through surface Functionalization of Woven carbon Fiber by CuO Nanostructures
Abstract: In order to produce a nanostructured interphase that improves the interfacial interaction with an epoxy resin matrix, copper oxide (CuO) nanostructures were hydrothermally formed onto woven carbon fibers (WCF). Hexagonal CuO nanorods were created using a two-step, seed-assisted solvothermal technique on plain woven carbon fiber. This study investigates the effects of surface modification of carbon fibers by the formation of CuO nanostructures using a hydrothermal technique on the mechanical properties …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 589–602 Read article
-
A review on Methodology used for Dry Turning of AISI 52100 Steel
Abstract: Bearing steel like AISI 52100 is one of the most widely used high cutting steel in industry for manufacturing of bearing. A large amount of coolant is used for machining at high speed due to which increase there has been a significant increase in environmental hazards. So Green or Dry manufacturing with optimize cutting parameters and its effect on tool material & work piece quality need to be studied to …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 467–475 Read article
-
Substantial Enrichment of Mechanical, Thermal and Electrical Properties of Thermoplastic Polyester Elastomer by Melt Blending with Nano-ZnO
Abstract: Polymers are more reinforced with nano metal oxides, a completely flexible composite of engineering that simplifies the way of exhibiting good mechanical and chemical features. Polymer mixtures represent a very vital field in the handling of innovative ingredients, which have better features than net polymers. Polymer mixtures are able to deliver ingredients with prolonged useful features beyond the range that can be achieved from a single polymer equivalent. A methodical …
Published in Emerging Trends in Chemical Engineering Read article
-
Research Paper on Thermal Comfort Analysis of Tractor Considering Multi-Parameters
Abstract: The main functions of a vehicle cabin are to provide a comfortable and relaxing environment for its operator and to protect them from vibrations, noise, and other adverse influences. Modern agricultural tractor cabins are complicated, high-efficiency systems, and the goal of their development is to reduce their negative influence on the environment. Main factors for thermal comfort are the dry-bulb temperature, relative humidity, surrounding surface temperature, and air motion. A …
Published in Journal of Mechatronics and Automation Read article
-
AQUASOMES: A Vesicular, Self-assembled Ceramic Nanoparticulate Drug Carrier
Abstract: Nano-biopharmaceutics involves delivery of biopharmaceutical product through different biomaterials like multi-functional nanoparticles, quantum dots, aquasomes, super-paramagnetic iron oxide crystals, and liposomes dendrimers. Aquasomes are considered as one of the most recently developed delivery systems for bioactive molecules like peptides, proteins, hormones, antigens and genes to specific sites. Aquasomes have a spherical shape and a particle size of 60–300 nm. These are three layered self-assembled nano-particulate carrier system. This three-layered structure …
Published in Research and Reviews: A Journal of Pharmaceutical Science · Vol. 12, Issue 3, 2025 · pp. 1–14 Read article
-
A Review of Different Polymer and Plasticizers
Abstract: Plasticizer and polymer are essential components in the pharmaceutical industry, especially when creating both cutting-edge and conventional drug delivery systems. The differences between synthetic, semi-synthetic, and all-natural polymers are examined in this review to highlight their diverse qualities and uses. When designing drug delivery systems to target areas, the choice of polymer is crucial. Because of their repeatability and adaptability, synthetic polymers are widely used in the creation of precision …
Published in International Journal of Membranes · Vol. 1, Issue 1, 2024 · pp. 1–7 Read article
-
A Review on utilizing waste Polyethylene Terephthalate in composite bituminous mixes
Abstract: Rapid ascend in population growth has led to a corresponding rise in annual Polyethylene Terephthalate waste and others Polymers production. This underscores the urgent necessity to reuse discarded polymers like Polyethylene Terephthalate, Poly Vinyl Acetate, Low Density Polyethylene etc. When discarded polymers isn't recycled, it typically finds its way into landfills, contributes to oceanic garbage patches, or undergoes incineration, each of which poses distinct environmental challenges. Moreover, controlling pollution from …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 10–17 Read article
-
Ensuring Pipeline Longevity: Key Factors for Durability in the Oil and Gas Industry
Abstract: This article explores the durability of pipes in the oil and gas industry, focusing on critical aspects such as remaining life, anti-wax coatings, life extension strategies, and the implications of oil spills and leaks. Corrosion is identified as a significant threat to pipeline integrity, influenced by various corrosive substances. Standards like API 581 and API 571 help assess corrosion rates and remaining life of pipelines transporting different crude oils. Additionally, …
Published in Journal of Petroleum Engineering & Technology · Vol. 14, Issue 3, 2024 · pp. 19–24 Read article
-
A Literature Review on Extrusion/Spheronisation-A Pelletization Technology
Abstract: Extrusion-spheronization is a leading pelletization technology, widely favored for its economic and commercial viability. It is a cost-effective method suitable for large-scale production, making it the most efficient approach for oral drug delivery. This process provides multiple benefits, such as improved flow characteristics, lower friability, a narrow particle size range, easier coating, consistent packing, reduced likelihood of dose dumping, and more predictable gastric emptying. Pellets usually measure between 0.5 and …
Published in Research and Reviews: A Journal of Pharmaceutical Science · Vol. 16, Issue 1, 2025 · pp. 61–71 Read article
-
Advancements in Thermal Performance of Solar Flat Plate Collectors: A Comprehensive Review
Abstract: Over the past couple of years, solar flat plate collectors (FPSCs) have undergone significant improvement regarding their thermal performance. The review evaluates the improvement of materials such as advanced coatings; metals with a high thermal conductivity; and nanostructured additives. New cover technologies, such as polymeric films and anti-reflection coatings, are discussed, as well as novel insulation technologies such as aerogels and vacuum panels. Also of interest are phase-change materials and …
Published in Journal of Thermal Engineering and Applications · Vol. 12, Issue 2, 2025 · pp. 10–14 Read article
-
TiO₂ Nanostructured Material-based Gas Sensor for Detecting Oxygen and LPG Gases
Abstract: This Paper investigates the use of TiO2 nanowires and nanotetrapods on glass and silicon substrates for sensing combustible gases such as LPG (Liquid Petroleum Gas) and Oxygen. The growth of Titanium dioxide (TiO2) nanowires/nanorods/nanotetrapods was investigated using both physical and chemical methods. In thermal evaporation method, both with and without vacuum conditions, was employed to synthesize various TiO2 nanostructures. A vacuum coating machine was utilized to create uniform TiO2 thin …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 443–451 Read article
-
Modified Oil Bitumen with Polymer Waste for Oil Pipeline Application from Bitu
Abstract: Protection of oil refining, oil production and gas pipeline equipment from corrosion is the most important problem today. Currently, anticorrosive materials are mainly used, resistant polymer compositions, epoxy resin, bitumen and other materials for coating metal parts of these equipment. But these anticorrosive materials do not always provide metals from corrosion at the metal-antioxidant boundary and do not provide high strength of the protective layer, so these anticorrosive materials do …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 101–109 Read article