Search
1006 articles for “extractant”
-
Study and Output Performance of PMSG Based WECS by Using MPPT Control Technique
Abstract: AbstractAs we know, our interests in Renewable Energy Resources are increasing day by day. So, the increasing integration of distributed generation sources is accompanied by problems with primary energy resources and policy issues such as economic efficiency. Due to these problems, we have to move towards various techniques which are able to eliminate the above problems. These techniques are called Maximum Power Point Tracking or MPPT. In this paper, the …
Published in Journal of Instrumentation Technology & Innovations · Vol. 9, Issue 2, 2019 · pp. 41–50 Read article
-
Fault Diagnostic Method of Transformers based on Hybrid ANN and Expert System
Abstract: Transformers are major equipments power system which affects not only the electrical energy availability of the area supplied, but also the economical operation of utilities. The most important concern about incipient faults in power transformer is that they may reduce the electrical and mechanical stress of the insulation. This proposed hybrid system utilizes dissolved gas in oil analysis techniques to diagnose for fault condition of power transformers. The Roger’s Four …
Published in Journal of Mechatronics and Automation · Vol. 1, Issue 1, 2014 · pp. 27–32 Read article
-
Solar Charge Controllers and their Implementation
Abstract: AbstractSolar energy is the incident energy from the Sun. The main components of this energy are incident light energy and the heat contained in it. The extraction of solar energy may be active or passive. Due to abundance and availability, solar energy is the most attractive alternate in available renewable resources. In the 21st century solar energy is expected to become increasingly attractive as a renewable energy source because of …
Published in Journal of Microcontroller Engineering and Applications · Vol. 7, Issue 1, 2020 · pp. 12–15 Read article
-
Recovery of Iron Values from Iron Ore Slimes using Reagents
Abstract: Mining wastes include waste generated during the extraction, beneficiation or processing of minerals like iron ore fines, slimes and tailings. Approximately 10–20% of the raw material is discarded as slimes in to slime ponds/tailing dams. Recovery of iron values from slimes result in economic benefit by utilization of waste as a resource and minimizes the threat to the environment. The iron ore slime is generally considered as waste due to …
Published in Journal of Materials & Metallurgical Engineering · Vol. 6, Issue 3, 2016 · pp. 32–43 Read article
-
Electrochemical Recovery of MnO2 from Spent Alkaline Batteries
Abstract: In the alkaline batteries of Zn/MnO2, the electrolytic manganese dioxide (EMD) is used as cathode that constitutes a very important part of household waste which contributes with heavy metals to the solid urban waste. This paper described the recovery of EMD by electro-oxidation on carbon cloth in acidic leached liquors from spent alkaline batteries. The maximum extraction for Mn and Zn were 43.68% (0.744 molL-1) and 56.11% (0.7321 molL-1) respectively. …
Published in Journal of Materials & Metallurgical Engineering · Vol. 9, Issue 3, 2019 · pp. 9–16 Read article
-
Synthesis and Characterization of Green Synthesized Iron Nano Particle (GInP) Using Eucalyptus globulus for Lead Removal
Abstract: The application of green synthesized iron nanoparticle for the removal of lead is researched in this study. The FT-IR and XRD results reveal that a nanoparticle with 80 nm size could be synthesized using Eucalyptus globulus leaf extract. The specific surface area of the nanoparticle was found to be 59 m2/g. The lead removal capability of the green synthesized iron nanoparticle (GInP) was investigated for lead concentration ranging from 50–250 …
Published in Journal of Materials & Metallurgical Engineering · Vol. 10, Issue 3, 2020 · pp. 20–25 Read article
-
Enhancement of Electrical Conductivity of Laterite Derived Ferric Oxide to Facilitate As Anode Materials
Abstract: Laterite is a mineral abundant in ferric oxide and various impurities, including aluminum oxide and silicon dioxide. The extraction of ferric oxide from laterite is accomplished through a cost-effective leaching process employing HCl, NaOH, and Sodium dodecyl sulfate (SDS). Characterization using Xray diffraction (XRD) confirmed the synthesized particles to be α-Hematite nano particles, with an average particle size of 94.21 nm, predominantly falling within the range of 90 nm to …
Published in Journal of Materials & Metallurgical Engineering · Vol. 13, Issue 3, 2023 · pp. 1–11 Read article
-
Modeling and Simulation of Pentacene based Organic Thin Film Transistors with Organic Gate Dielectrics
Abstract: AbstractTwo structures of pentacene organic thin film transistors (OTFT) with organic dielectrics, polymethyl methacrylate (PMMA) and polyvinyl alcohol (PVA) have been numerically simulated with TCAD ATLAS tool. Output and transfer characteristics were simulated and mobility, threshold voltage, sub threshold swing (SS) and current on/off ratio that play a part in the increment of conductivity of device were extracted. The authors show that the semiconductor-insulator interface actively affects the performance of …
Published in Journal of Microelectronics and Solid State Devices · Vol. 4, Issue 3, 2017 · pp. 13–18 Read article
-
Numerical Simulation and Modeling of Graphene Field Effect Transistors for High Frequency Applications
Abstract: AbstractIn this paper numerical simulation of graphene field effect transistor (GFET) has been performed using finite element method by solving Poisson's equation, continuity equation and energy balance equation self consistently. Various performance characteristics including charge distribution, band gap energy, transfer and output characteristics, electrostatic potential distribution and transconductance have been extracted.Keywords: Graphene field effect transistor (GFET), energy balance equation, mobility, ambipolar, numerical simulationCite this ArticleAshish Jha, Dwivedi ADD. Numerical Simulation …
Published in Journal of Microelectronics and Solid State Devices · Vol. 5, Issue 1, 2018 · pp. 27–33 Read article
-
Numerical Simulation of Pentacene based Organic Thin Film Transistor with Inorganic Gate Dielectrics
Abstract: This paper presents a 2D numerical simulation and Electrical Characterization of Pentacene (Organic semiconductor) based Organic thin film transistor (OTFT) devices with different inorganic gate dielectrics materials SiO2, Al2O3 and HfO2 and Electrical parameters including; Mobility (µ), Threshold Voltage (Vt), Ion/Ioff ,Sub threshold slope (SS) and Transconductance (gm) are extracted.
Published in Journal of Microelectronics and Solid State Devices · Vol. 6, Issue 2, 2019 · pp. 32–38 Read article
-
Bearing Defect Diagnosis: An Approach for Manufacturing Industries Using Wavelet Transform Based Features
Abstract: To maintain reliability in the manufacturing units, industries have concentrated their attention on the condition based maintenance. Fault detection and diagnosis are the two of three condition based maintenance mainstays. Bearing is one of the most important and essential components of the rotating machines. Hence, the researchers have shown their interest in bearing fault detection and diagnosis from the last few years. They mainly use bearing vibration as fault characteristics …
Published in Journal of Microelectronics and Solid State Devices · Vol. 4, Issue 1, 2017 · pp. 15–21 Read article
-
Improvements in Analog Performance of Dual Metal Gate based Silicon-on-Insulator Junctionless Transistor with Pocket Doped Window
Abstract: This paper elucidates the impact of pocket doped window on the analog performance of dual metal gate based silicon-on-insulator junctionless transistor (DMG SOIJLT). The analog parameters of proposed SOIJLT is compared with DMG based conventional SOIJLT. The findings of analog performance comparison reveal that transconductance (gm), transconductance generation factor (TGF), output conductance (gd), output resistance (r0), intrinsic gain (AV), and cut-off frequency (fT) have improved for DMG PD-SOIJLT as compared …
Published in Journal of Microelectronics and Solid State Devices · Vol. 8, Issue 1, 2021 · pp. 1–8 Read article
-
Nuclear Diagnostic Imaging for PET Scan using Technetium-99m
Abstract: AbstractNuclear diagnostic procedures are used in almost every hospital worldwide on a daily basis. PET scan is the most commonly used nuclear medical imaging procedure. PET scan is considered a safer alternative to other nuclear diagnostic procedures. It is primarily used to identify the diseases, predict the possibility of occurrence of a particular disease, planning and analysis of a treatment. The PET scan has many applications but its only side …
Published in Journal of Nuclear Engineering & Technology · Vol. 8, Issue 2, 2018 · pp. 1–3 Read article
-
Study of Applications of Artificial Intelligence in Nuclear and Particle Physics
Abstract: Abstract This article explains the main concepts of the artificial intelligence, focusing on its history, its types and applications in Nuclear & Particle Physics. Deep learning method employs nonlinear functions to adjust the weight of the data wanted from the data background. By extracting meaningful data and fitting its shape with parameterized functions, deep learning method can capture main rules of the rude data, and make reliable predictions based on …
Published in Journal of Nuclear Engineering & Technology · Vol. 9, Issue 1, 2019 · pp. 29–33 Read article
-
A Synthesized Effect of Urban Modification and Net Radiation on the Climate of Lagos Metropolis, Nigeria
Abstract: Land cover adjustment which includes urban landscaping, agriculture crops or hardscapes forconstructing and parking lots promote variations in the energy and radiation balance. Due tothe above listed modifications, the surface temperatures and near-surface air temperatures overurban patches are generally higher than those over rural areas, thus resulting in an Urban HeatIsland (UHI). In this study, urban landscape and Land Surface Temperature (LST), netradiation, and Normalized Difference Vegetation Index (NDVI) data …
Published in Journal of Nuclear Engineering & Technology · Vol. 10, Issue 3, 2020 · pp. 9–28 Read article
-
Thorium the Fuel of the Future to Revitalize Nuclear Power Generation
Abstract: After disasters like Kyshtym, Windscale, Fukushima, Chernobyl etc., nuclear energy carried a dreaded stigma. The cost of nuclear power generation in the conventional way is on the rise, and so there is a resurgence in nuclear technology using thorium as fuel. There is a great pressure from international community to reduce carbon emission. So many countries are looking for a path to generate energy that is distinctly different but pays …
Published in Journal of Nuclear Engineering & Technology · Vol. 12, Issue 3, 2022 · pp. 1–26 Read article
-
Power Generation using Photovoltaic System with MATLAB Simulink
Abstract: The issues of decreasing natural resources, the ensuing environmental repercussions, and the increasing demand for new energy resources have been actively investigated in recent years [13], partly because energy resources and their use will be a key concern of this century.Over the past ten years, grid-connected photovoltaic (PV) power systems have experienced phenomenal growth. Growing public awareness of climate change, tax advantages and rebates, and the falling cost of solar …
Published in Journal of Nuclear Engineering & Technology · Vol. 13, Issue 3, 2023 · pp. 36–42 Read article
-
ISOLATION OF CELLULOSIC NANOPARTICLES FROM COIR FIBRE FOR THE PREPARATION OF NATURAL RUBBER COMPOSITES
Abstract: Coir fibre and natural rubber are renewable and sustainable agro-resources that can be harnessed for the production of finished rubber articles on industrial scale. In this research, coir fibres extracted from coconut husk were subjected to alkaline-peroxide delignification. The delignified fibres were further transformed into coir fibre cellulosic nanoparticles (CFNP) with particle size distribution of 68–311 nm and a polydispersity index (PDI) of 0.371 through friction homogenization. These particles were …
Published in Journal of Polymer & Composites · Vol. 6, Issue 1, 2018 · pp. 9–16 Read article
-
Development of Starch/Keratin/Chitosan Composite Material as a Substitute for Polystyrene in Food Packaging
Abstract: The increase in awareness of the environmental impact of non-biodegradable waste from food packaging, has seen manufacturers push towards initiating production of eco-friendly packaging materials. This research serves as a step forward in the direction of going green, through the development of a composite material from natural, biodegradable polymers, for use in production of packaging material for fast foods. The composite was prepared from starch and chitosan with chicken feather …
Published in Journal of Polymer & Composites · Vol. 7, Issue 3, 2019 · pp. 1–7 Read article
-
Comprehensive account on role of catechin based polyphenols in nanocomposite formulations
Abstract: Antioxidants play a crucial role in wellness, health maintenance and the prevention of chronic and degenerative disease, in neuroprotection activities and protection against oxidative cellular damage by U.V. radiation. Polyphenols are secondary metabolites of plants usually involved in defense against ultraviolet radiation or aggression by pathogens. Antioxidant properties, free radical-scavenging abilities and antimicrobial properties of these polyphenols make them useful in the field of biomedical applications, used as food additives, …
Published in Journal of Polymer & Composites · Vol. 8, Issue 1, 2020 · pp. 26–31 Read article