Search
977 articles for “Properties of composite”
-
Experimental Investigation of Boron Carbide Reinforced Al-Mg-Si Alloy Nano Composites by the Stir Casting Method Using Machine Learning Algorithm
Abstract: For the purpose of this experiment, Al-Mg-Si alloys were manufactured with the use of the stir casting process with a metal mold. The alloys had different weight percentages of nano boron carbide, which ranged from 0 to 4% by weight. The intervals between the percentages were 0.5. Following that, the microstructural and mechanical parameters of the as-cast alloy and the nano composites were compared and contrasted according to ASTM Standards …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1766–1779 Read article
-
Experimental Investigation of High Strength Geopolymer Concrete
Abstract: This paper presents the experimental studies concerning high strength in geopolymer concrete. So far many researches were carried out in geopolymer concrete and also it enhances the strength and durability of OPC concrete. Several compositions of geopolymer concrete mixes were executed by varying the percentage of fly ash and GGBS. By finding the optimum percentage of fly ash and GGBS from the experimental results, the mechanical properties of geopolymer concrete …
Published in Journal of Geotechnical Engineering · Vol. 4, Issue 2, 2017 · pp. 29–31 Read article
-
Characterization and Optimization of Neem Leaves and Moringa Seed Husk-based Composite Activated Carbon for Efficient Adsorption of Methylene Blue Dye
Abstract: The research in question was meticulously conducted within the premises of the Nigerian Liquefied Gas (NLG) Engineering laboratory, situated at the esteemed University of Maiduguri, Nigeria. This study focuses on the development and characterization of a composite material derived from neem leaves (NL) and Moringa seed husk (MSH) to adsorb methylene blue (MB) dye effluent. The synthesis process involved pyrolyzing MSH and NL at 400°C to produce MSH and NL …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 13, Issue 3, 2023 · pp. 12–22 Read article
-
Future Fibers for the Airport Engineering
Abstract: This paper explores the use of advanced fibers in drone technology, with a specific focus on textiles for drone body structures. As drones continue to evolve, selecting materials that enhance performance, durability, and sustainability has become increasingly critical. Traditionally, drone components rely on resin-based composites for strength and rigidity. However, recent advancements demonstrate that certain fibers can achieve exceptional structural performance without the need for resin. The study emphasizes materials …
Published in Journal of Aerospace Engineering & Technology · Vol. 15, Issue 1, 2025 · pp. 14–18 Read article
-
Characterization of Fly-Ash and Cold Setting Resin Powder Compacts
Abstract: Industrial waste like fly-ash which is creating environmental problems, is mainly used as a building material due to its low cost and easy availability. But the main disadvantage of these bricks is its low strength. So, a lot of research is going on to increase the strength of these bricks. The present research work is carried out to develop a new systematic procedure to produce fly ash composite bricks which …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 2, Issue 2, 2015 · pp. 17–24 Read article
-
Investigation of Mechanical Characteristics of 3D Printed Composite Materials (Thermoplastic Urethane and Nylon (PA6))
Abstract: 3D printing has emerged as a game-changer, progressively replacing conventional metals and thermosetting polymers, primarily due to its capacity to create lightweight structures with impressive mechanical attributes. The technology's advantages, such as minimized material wastage, design adaptability, and the ability to craft intricate structures, have propelled its widespread adoption. Within the realm of additive manufacturing, Fused Deposition Modeling (FDM) stands out as a technique capable of producing intricate functional components. …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 65–76 Read article
-
Spin Coated Polyvinylidene Difluoride / Ionic Liquid Nanocomposite Thin Films with Enhanced Dielectric and Piezoelectric Properties
Abstract: This study introduces a novel approach to enhance the piezoelectric and dielectric properties of polyvinylidene difluoride (PVDF) by incorporating 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF₄]) ionic liquid via a spin-coating method— a processing route that has been rarely reported for PVDF/ionic liquid composites. Structural and morphological analyses using X-ray diffraction (XRD), Raman spectroscopy, Fourier-transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM) confirm the successful integration of [BMIM][BF₄] into the PVDF matrix. The …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1190–1204 Read article
-
Analysis of Die Corner Gap Formation for Strain Hardening Materials in ECAP Through an Upper Bound Sensitivity Approach: A Comparative Study
Abstract: In recent work, using a proposed central composite factorial analysis, the upper-bound theorem's theoretical concept for the equal channel angular pressing process are used. The upper-bound theorem-based theoretical solutions consider Tresca friction conditions and varied fillet radii at the die channel junction. When using AA5083's uniaxial mechanical properties, isotropic nonlinear work hardening is assumed. The ratio of the cumulative effective plastic strain to the time generated by the deformation zones, …
Published in Trends in Machine design · Vol. 12, Issue 3, 2025 · pp. 1–22 Read article
-
Growth, Structural and Optical characteristics of Citric Acid Doped Copper Sulphate Single Crystals Polymer Composites Photonic Applications
Abstract: The organic material Citric Acid doped Copper Sulphate single crystals (CACS) was synthesized and single crystal was grown by slow evaporation method. The incorporation of citric acid, an organic compound, introduces polymer-like functional behavior into the crystal matrix, forming an organic-inorganic hybrid composite with enhanced optical and structural characteristics. Single crystal XRD confirmed the triclinic system with unit cell parameters: a = 5.96 Å, b = 6.11 Å, c = …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 482–488 Read article
-
Dynamic Vibration and Damping Analysis of Sustainable Nano-Reinforced Polymer Composite Elements for Vehicle Suspension Applications
Abstract: This paper presents an analytical investigation into the dynamic vibration characteristics of nano-reinforced polymer composite elements intended for vehicle suspension applications. A single-degree-of-freedom (SDOF) quarter-car model is employed to derive fundamental expressions for natural frequency, damping ratio, logarithmic decrement, and displacement transmissibility. The primary contribution lies in establishing explicit analytical linkages between material-level viscoelastic properties specifically storage modulus and loss modulus and system-level suspension parameters including stiffness and damping coefficients. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 561–570 Read article
-
Herbal Dusting Powders: A Comprehensive Review of Benefits, Applications, and Market Trends
Abstract: Herbal dusting powders are gaining popularity as a natural alternative to conventional talcum powders, offering benefits such as moisture absorption, soothing skin irritations, and preventing friction. This review article explores the multifaceted aspects of herbal dusting powders, focusing on their composition, therapeutic benefits, sustainability, regulatory considerations, and consumer trends. The article delves into the wide array of herbal ingredients used in these powders, including neem, chamomile, lavender, and sandalwood, each …
Published in Research & Reviews : Journal of Herbal Science · Vol. 13, Issue 3, 2024 · pp. 21–27 Read article
-
A Sol-Gel Approach for the Fabrication of Zinc Oxide Nanoparticles and Their Nanocomposite with Urea Formaldehyde (UF)
Abstract: In the performed work, zinc oxide nanoparticles were synthesized via the sol-gel method using zinc sulphate as the precursor material. Urea-formaldehyde (UF) resin was employed as a polymer matrix to encapsulate the produced ZnO through an acid-catalyzed polymerization process. This encapsulation aimed to improve the dispersion stability and surface reactivity of ZnO within the polymeric medium. The synthesized materials were subjected to comprehensive characterization using Fourier Transform Infrared Spectroscopy (FT-IR), …
Published in International Journal of Crystalline Materials · Vol. 2, Issue 2, 2025 · pp. 21–27 Read article
-
Copper Sulfide Semiconducting Nanoparticles for Antibacterial Applications: Synthesis Strategies, Mechanisms and Performance – A Review
Abstract: Copper sulfide nanoparticles (CuS NPs) have drawn growing attention as a next-generation antibacterial platform, owing to their tunable structural, optical, and catalytic properties. This review consolidates current evidence on CuS NP synthesis, mechanisms, and antibacterial performance, comparing chemical and green synthesis routes alongside the effects of morphology, doping, and surface modification. Mechanistically, CuS NPs act through several overlapping pathways, including reactive oxygen species generation, bacterial membrane disruption, ion release, and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 236–253 Read article
-
Properties of Concrete with Reinforcement Eggshell Powder As Cement
Abstract: Many people choose concrete because of its reputation for durability and dependability. Concrete is not only strong and consistent, but also energy efficient, design flexible, cheap, and generally ecofriendly. In addition to protecting natural ecosystems, stable civilizations often make plans for further industrialization and urbanization. As long as it is utilized in a compositionally flexible and ecologically friendly way, concrete may be used to create aesthetically stunning structures. Inadequate domestic …
Published in Journal of Polymer & Composites · Vol. 11, Issue 4, 2023 · pp. 46–52 Read article
-
Study of the CuS/CdSe Quantum Dots on the Optical Properties of Green Synthesis
Abstract: Chalcogenides based nanomaterials, such as CdSe are emerging as an important material offering transformative potential across multiple domains, such as photocatalysis, optoelectronics, sensing, and photo luminesce. In this study we synthesised CuS/CdSe quantum dots by varying CuS concentration through plant mediated green method. The copper sulfide synthesized at varying concentrations of the Se source, exhibited bonding configuration that are comparable to those of the Cd source. The goal of this …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 176–184 Read article
-
Synergistic Procurement and Molecular Characteristics of Full Grain Leather in Advanced Material Engineering
Abstract: This article explores the molecular characteristics and engineering processes involved in the production and application of full-grain leather, recognized for its premium quality due to its intact granular structure. Full-grain leather, undivided into split layers, maintains a robust and durable molecular composition, making it a preferred material in high-quality garment manufacturing. The study emphasizes the role of leather conditioners in restoring the molecular suppleness and moisture retention of leather, crucial …
Published in International Journal of Advance in Molecular Engineering · Vol. 2, Issue 2, 2024 · pp. 8–13 Read article
-
A Review Paper on Friction Stir Processing on Aluminium Alloys
Abstract: Friction stir processing is a step from friction stir welding, targeted at surface modification through improving the local microstructure via localized plastic deformation. The tool consists of a rotating mechanism incorporating a shoulder and pin that are inserted into the material, traversing the designated area. When the tool's shoulder and the workpiece make contact, friction develops, generating heat that produces plastic deformation. This localized plastic deformation and heat impact result …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 2, Issue 1, 2024 · pp. 1–8 Read article
-
ANN Approach to Forecasting the Strength of Nano Silica Incorporated Geopolymer Composite
Abstract: Coal and steel industry by-products, such as fly ash (FA) and blast furnace slag (GGBS), have gained significant attention as precursors for geopolymer concrete (GPC) due to their high aluminosilicate content, offering a sustainable alternative to conventional cement. Nano silica (NS), recognized for its exceptional pozzolanic activity and ability to refine microstructure, has shown potential to enhance the mechanical and durability properties of GPC. This study investigates the influence of …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 267–278 Read article
-
Fabrication of Polydimethylsiloxane Composites with Nickel Nanoparticles: Unification and Current–Voltage Relationship
Abstract: Polydimethylsiloxane (PDMS)–nickel nanoparticle (NiNPs) nanocomposite films were fabricated and systematically investigated to understand their electrical transport behavior through current–voltage (I–V) characterization. Nanocomposite films with varying Ni nanoparticle filler concentrations (14.88 wt%, 15.77 wt%, and 16.65 wt%) were prepared using a solution-mixing and spin-coating technique, followed by controlled thermal curing. The electrical properties of both pristine PDMS and PDMS– NiNPs nanocomposites were examined over a wide voltage range (up to 800 …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 16, Issue 1, 2026 · pp. 22–29 Read article
-
Aluminium-Doped Zinc Ferrite Nanoparticles Synthesized by Combustion Method for Polymer Composite Applications
Abstract: ZnFe₂₋xAlₓO₄ (x = 0 and 0.5) nanoparticles were synthesized via a combustion method owing to its simplicity, cost efficiency, and ability to produce highly crystalline nanomaterials. Powder X-ray diffraction (XRD) analysis confirmed the formation of a single-phase cubic spinel structure without detectable secondary phases, indicating high phase purity. The average crystallite size was estimated to be in the range of 14–20 nm, confirming the nanocrystalline nature of the samples. Field-emission …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 272–282 Read article