Search
1972 articles for “Octadec-9-enoic acid methyl esters” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
Nothing matched all of your words, so these match any of them.
-
Oxidation Behaviour of Plasma Sprayed Carbon Nanotubes-Alumina Coated ASME-SA213-T291 Boiler Tube Steel
Abstract: In this research work, oxidation behaviour of Carbon Nanotubes reinforced Al2O3 coated ASME-SA213-T91 boiler tube steel specimens were investigated at 900°C temperature in air. The different CNTs-Alumina composite coatings were deposited using plasma spray technique and NiCr was used as bond coat before applying CNTs-Al2O3 coatings. The hot corrosion studies were conducted on all coated specimens in air at 900°C under cyclic conditions. The thermogravimetric technique was used to establish …
Published in Journal of Materials & Metallurgical Engineering · Vol. 7, Issue 3, 2017 · pp. 1–15 Read article
-
Preparation of Phase – Pure Nanocrystalline Anatase and Rutile TiO2 using Hydrolysis of TiCl4 in presence of surfactants
Abstract: Hydrolysis of TiCl4 was carried out in two different ways to prepare nano crystalline TiO2. In the first method the hydrolysis of TiCl4 was carried under high acidic conditions at low temperature. In the second method hydrolysis was carried out using (NH4)2SO4 as an additive. It can be seen that the hydrolysis of TiCl4 under high acidic conditions promotes the growth of rutile phase of TiO2, where as hydrolysis in …
Published in Journal of Materials & Metallurgical Engineering · Vol. 8, Issue 1, 2018 · pp. 31–40 Read article
-
Effect of Magnetic Field on Casting Parameters
Abstract: AbstractThe casting process is one of the oldest manufacturing methods involving squeezing / jolting the green sand used as moulding material, and further was developed with use of binders such as clay/organic resins. The constants search for newer moulding material lead to the magnetic mould involving steel shots and application of magnetic field. The preliminary trials on one of the process parameters i. e. Magnetic field was carried out and …
Published in Journal of Materials & Metallurgical Engineering · Vol. 8, Issue 3, 2018 · pp. 30–35 Read article
-
Recovery of Tungsten and Copper from Waste Tungsten Copper Borings
Abstract: During the last many years, the unused tungsten and copper alloy from the discarded electric and electronic equipment and industrial scraps are gathering attention as a section of waste. Because of tungsten's many diverse uses, numerous types of scrap were available for recycling by a wide variety of processes. In the present study, tungsten and copper was recovered by leaching process in ammonium hydroxide solution followed by electro winning process. …
Published in Journal of Materials & Metallurgical Engineering · Vol. 7, Issue 1, 2017 · pp. 1–8 Read article
-
Recovery of Iron Values from Iron Ore Slimes using Reagents
Abstract: Mining wastes include waste generated during the extraction, beneficiation or processing of minerals like iron ore fines, slimes and tailings. Approximately 10–20% of the raw material is discarded as slimes in to slime ponds/tailing dams. Recovery of iron values from slimes result in economic benefit by utilization of waste as a resource and minimizes the threat to the environment. The iron ore slime is generally considered as waste due to …
Published in Journal of Materials & Metallurgical Engineering · Vol. 6, Issue 3, 2016 · pp. 32–43 Read article
-
Investigation on pitting corrosion rate of Micro Plasma Arc Welded Titanium (Ti-6Al-4V) alloy sheets in KBr solution using TOPSIS
Abstract: Titanium is having good anti-corrosion properties in both basic and acidic medium. However, when it is subjected to severer heating processing like welding, there is a possibility of corrosion formation at the weld joint. In the present work Pulsed current MPAW is used for joining 0.5 mm thick Titanium (Ti-6Al-4V) alloy sheets. Peak Current, Base Current, Pulse Rate and Pulse Width are considered as input parameters and fusion zone corrosion …
Published in Journal of Materials & Metallurgical Engineering · Vol. 9, Issue 2, 2019 · pp. 37–53 Read article
-
Reliability Analysis of Lube Oil in a Generator
Abstract: In this research work, we considered the best or better practices of maintaining lube oil balance in generator set by adopting a reliability analysis method. It was established that the running of the generator set for a long time and the heaviness of the appliances switched on upon the generator has been investigated to be a contributing factor for the reduction in the quality of the lube oil which influences …
Published in Journal of Materials & Metallurgical Engineering · Vol. 12, Issue 3, 2022 · pp. 1–8 Read article
-
Enhancement of Electrical Conductivity of Laterite Derived Ferric Oxide to Facilitate As Anode Materials
Abstract: Laterite is a mineral abundant in ferric oxide and various impurities, including aluminum oxide and silicon dioxide. The extraction of ferric oxide from laterite is accomplished through a cost-effective leaching process employing HCl, NaOH, and Sodium dodecyl sulfate (SDS). Characterization using Xray diffraction (XRD) confirmed the synthesized particles to be α-Hematite nano particles, with an average particle size of 94.21 nm, predominantly falling within the range of 90 nm to …
Published in Journal of Materials & Metallurgical Engineering · Vol. 13, Issue 3, 2023 · pp. 1–11 Read article
-
Bandgap Analysis of Quasi Bandgap Semiconductor Using FDTD Technique
Abstract: In this work photonic bandgap analysis of boron nitride (BN) quasi bandgap semiconductor is investigated using finite difference time domain (FDTD) method. Here boron nitride semiconductor is cogitated as a-BN, h-BN, c-BN and w-BN semiconductor, where boron nitride is realized by the combination of two BN semiconductor layers separated by air. Simulation for photonic bandgap of the aforementioned semiconductor structure is carried out with respect to thickness of odd and …
Published in Journal of Microelectronics and Solid State Devices · Vol. 2, Issue 2, 2015 · pp. 1–4 Read article
-
Built in Self Repair for Embedded Memories: A Survey
Abstract: Memory is a significant part of every single computing system. In SOC (System-on-a-chip), 90 to 92% of the total chip zone is enclosed by embedded memories (ITRS 2009) and that means memory density is higher than the logic density. Consequently testing and diagnosis of memories are imperative issues in the SOCs. Revenue of memory is pretentious by the accountabilities present in memory which also distresses the yield of SOC. Built …
Published in Journal of Microelectronics and Solid State Devices · Vol. 2, Issue 1, 2015 · pp. 18–22 Read article
-
An Overview of Heavy-ion Collisions
Abstract: AbstractA large number of experiments have been performed to explore the heavy-ion collisions dynamics using accelerator facilities available in India. The experimental results have revealed that in reactions induced by nucleons or light particles at energies of the order of a few tens MeV, the great majority of the processes one observes are of statistical nature though they cannot be interpreted as a consequence of the decay of a fully …
Published in Journal of Nuclear Engineering & Technology · Vol. 9, Issue 2, 2019 · pp. 8–23 Read article
-
Numerical Prediction of Shear Modulus of Multi-Layer PUF Cored Sandwich Composites
Abstract: The present numerical investigation was mainly concerned with the evaluation of apparent shear modulus (Gc) of multi-layered polyurethane foam cored sandwich beams using a novel approach through the medium of general purpose program i.e. FEM/ANSYS. Aiming to the goal, three-point bending analysis was performed on sandwich beam models made up of composite face sheets and multi-layer polyurethane foam cores of different layer densities. Finite element models of sandwich beams were …
Published in Journal of Polymer & Composites · Vol. 5, Issue 3, 2017 · pp. 53–61 Read article
-
Enhancement of anticorrosion performance on aluminium substrate by novel nanocomposites of PANI/Bi2O3.CO.ZnO/CNT
Abstract: PANI/Bi2O3.CO.ZnO nanocomposites were prepared in presence of bismuth cobalt oxide nanoparticles at 25oC using ammonium persulphate as an oxidant in an in situ polymerisation with aqueous solution of camphor sulphonic acid (SDBS). These nanocomposites were characterized by XRD, FTIR, TEM, UV and SEM. The performance of PANI, PANI/Bi2O3.CO.ZnO nanocomposites and PANI/Bi2O3.CO.ZnO/CNT nanocomposites as anticorrosion protective coating on Al in 0.5 M HNO3 was studied by using potentiodynamic polymerisation technique and …
Published in Journal of Polymer & Composites · Vol. 6, Issue 2, 2018 · pp. 31–41 Read article
-
Conductive Organic Polymer Based Inorganic-Organic Hybrid Composite: Synthesis and Characterization
Abstract: Inorganic organic (IO) hybrids where inserted conducting organic polymer (COP) imprints their polymeric nature onto the hybrid material are one of the most promising candidates for solving many technological problems of modern technocratic society. The Inorganic-organic hybrid material of para toluidine (organic) & mercuric chloride (inorganic) was synthesized by using “instant-heating and slow-cooling” technique. Some light orange coloured plate-like crystals were obtained. XRD pattern of the grown crystal were analysed …
Published in Journal of Polymer & Composites · Vol. 8, Issue 1, 2020 · pp. 1–5 Read article
-
Improving Photocatalytic and Antibacterial Properties of Zein/Polyvinyl Alcohol Polymer Composite Film by Dispersing TiO2 Nano Particles
Abstract: Zein/polyvinyl alcohol/nano-TiO2 composite film was effectively blended using a solution casting method. Mechanical, photocatalytic, and antibacterial properties of the composite film were evaluated. The breaking elongation of the composite film increased up to the maximum loading of 0.4% of nano-TiO2. The humidity and moisture content relationship was estimated with standard modified models of Halsey, Oswin, Chung Pfost, and Henderson. It was found that the Halsey model was the most suitable …
Published in Journal of Polymer & Composites · Vol. 8, Issue 2, 2020 · pp. 110–127 Read article
-
Glass Fiber Layer Effect on Chemico-mechanical Properties of Light Cure Adhesive Systems
Abstract: Introduction: Orthodontic adhesives should have clinically acceptable shear and tensile bond strength to withstand masticatory forces and those generated by treatment mechanics. Mechanical properties of the adhesive, such as flexural modulus of elasticity, tensile strength, and compressive strength, are more heavily influenced by the resin matrix's Degree of cure (DC). Aim: The study compares the effect of the Glass fiber layer on Chemico-mechanical properties using three different light cure adhesive …
Published in Journal of Polymer & Composites · Vol. 11, Issue 1, 2023 · pp. 1–9 Read article
-
Testing for Shielding and Estimation of Linear Absorption Coefficient Using Gamma Irradiation of Polymer Composites
Abstract: The polymer composites were developed for the application of shielding material in a radiation environment. To determine the linear absorption coefficient of the developed materials for neutrons; an experiment was carried out using an Am-Be neutron source of strength ~3 × 107 n/s. The composites of Epoxy polymer were filled with different three fillers; Graphite, Lead, and Boron Nitrided Nanopowder prepared with the same filler content. Transmitted neutrons were detected …
Published in Journal of Polymer & Composites · Vol. 10, Issue 3, 2022 · pp. 59–68 Read article
-
Application of Aqueous Two-Phase Systems in the Extraction of Bovine Serum Albumin
Abstract: Protein partitioning in an aqueous two-phase system (ATPS) has been found to be a powerful method for extracting and separating mixtures of biomolecules. In ATPS, many factors influence the partition coefficient K (which is the ratio of protein concentration in the top phase to that in the bottom phase) and the recovery percent (Rec%). Two systems of ATPS were used: first, polyethylene glycol (PEG4000)/sodium phosphate, and second, PEG4000/dextran. The behavior …
Published in Journal of Polymer & Composites · Vol. 11, Issue 1, 2023 · pp. 41–50 Read article
-
Production of Alum from Aluminium Drink Cans Waste for Water Treatment
Abstract: The graphite furnaces atomic absorption spectrophotometry (GFAAS) technique has been previously used to quantify the aluminium (Al) content in soft drinks made from aluminium cans over the course of a 12-month storage period. The current research aimed to determine the efficacy of alum obtained from waste soft drink cans compared to the alum obtained from local markets in treating water from Shatt al-Arab, Basrah, Khorramshahr, and Abadan, Iraq. The Shatt …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 102–109 Read article
-
Boron Nitride Nanoplatelets and Aluminium Nitride Incorporated Organic Organic Eutectic Phase Change Materials with Enhanced Thermal Conductivity with Low-Loading Nanoadditives
Abstract: Miniaturized high performance electronic appliances generate tremendous heat during the duty cycle, has led research community to explore advanced thermal management strategies. Operating electronics at high temperature may result in malfunctioning of compact appliances. Thus, phase change materials (PCM) are applied to maintain isothermal temperature by implementing phase transition through latent heat. To improve the thermal conductivity and to deduce at suitable phase transition temperature of novel eutectic PCM, nanoplatelets …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 1–9 Read article