Search
1969 articles for “Essential words: polymer barrier films” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
Nothing matched all of your words, so these match any of them.
-
Sputter Deposition of Ni/Ti Thin Film and their Molecular Dynamics
Abstract: Ni/Ti multilayer fabricated using DC/RF magnetron sputtering technique. Multilayer of Ni/Ti is deposited by alternate deposition of nickel layer and titanium layer, followed by annealing at different temperatures. Annealing treatment is carried out to achieve NiTi SMA thin films. The annealing was accompanied by inter-diffusion, amorphization and precipitation of various intermetallic phases. Classical molecular dynamics simulations have been performed for the atomic diffusion during annealing of Ni/Ti multilayer using embedded …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 3, Issue 2, 2016 · pp. 35–43 Read article
-
Hard and Wear-Resistant Nanocomposite Thin Film Coatings
Abstract: Recent advancements in the hard and wear-resistant protective coatings have made high speed machining increasingly viable in the industries. The nanocomposite coatings have immense applications today in dry and high speed machining due their high wear resistance and high oxidation resistance properties. The high oxidation and wear resistance properties are obtained by addition of fourth element such as silicon to tertiary transition metal nitride compounds. In this work, a review …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 2, Issue 3, 2015 · pp. 28–32 Read article
-
On a Nanocomposite Metal Oxide Thin-film Transistor with Nanofilm Gate Dielectric Material: Material Chemistry, Sol–Gel Process and Electronic Worthiness
Abstract: ABSTRACT : ILO based MOTFT is fabricated with PBZ gate dielectric. PBZ is formed over doped Si substrate by cheap sol-gel process. Thin film PBZ is analysed with XRD, UV-Vis and AFM. IZO is used as bottom gate to contact TFT. This device needs only 5V as operating voltage, and so is good for lower electronics <40V. It shows excellent e-mobility 4.5cm2/V/s, with on/off ratio 5x105 and sub-threshold swing 0.35V/decade.
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 6, Issue 3, 2019 · pp. 8–12 Read article
-
Report on Microfluidic Flow of Dyed Working Liquids inside the Polymeric Devices
Abstract: In this experimental work, a single SU-8 based glass microfluidic device is engineered by the maskless lithography and indirect bonding technique. Also, total nine individual polymethylmethacrylate (PMMA) based microfluidic devices are fabricated by maskless lithography, hot embossing lithography, and direct bonding technique. Dyed ethylene glycol, dyed ethanol, and dyed aqueous isopropyl alcohol (50% water, 50% IPA) are prepared and used as working liquids to record each surface-driven microfluidic flow. The …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 8, Issue 1, 2021 · pp. 22–29 Read article
-
A Brief Overview of the Removal of Fluoride and Chromium Using Polymer Adsorbents
Abstract: Water tainted with heavy metals are the serious worldwide issues face today because of economic and industrial growth. Even at trace amounts, hexavalent chromium is a significant metal ion pollutant that is highly harmful to humans, animals, plants, and microbes. There are several methods for purifying water, but adsorption is one of the most straightforward, practical, and cost-effective approaches. Chromium is one such significant metal that may be released by …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 10, Issue 2, 2023 · pp. 1–14 Read article
-
Human Resource Management: Essential Tool for Sustainability of Infrastructures and Civil Engineering Performance in Establishments
Abstract: Construction companies, Consulting Civil and Structural engineering establishments have major roles to play within the capacity building, manpower development and sustainability of world’s infrastructures. This paper examined human resource management as essential tools for sustainability of infrastructures and engineering establishments. Methodology adopted includes review of literatures, human resource management theories and other information from engineers in selected establishments. Guiding theories in human resource management and therefore the challenges of managing …
Published in Recent Trends in Civil Engineering & Technology · Vol. 10, Issue 3, 2020 · pp. 14–19 Read article
-
Effect of Addition of SBS Polymer on Stability and Flow Characteristics of Bituminous Concrete Mix
Abstract: AbstractThis paper describes the effect of addition of SBS on the Marshall stability and flow values of bituminous concrete mix samples. The transportation sector in India is one of the fastest developing sectors. The need for infrastructure development to boost the growth and development of the country cannot be ignored. It thus becomes imperative to have good roads all across the country, not just for the passenger vehicle movement but …
Published in Trends in Transport Engineering and Applications · Vol. 5, Issue 1, 2018 · pp. 1–6 Read article
-
Modeling of Thermocol Waste Polymer Reinforced Asphalt Bitumen
Abstract: The purpose of this research is to investigate the possibility of using thermocol waste as polymer additives in Bituminous Mix. The characteristics of thermocol modified binder obtained by fix mixing temperature, was investigated. The binders were prepared by mixing the PET in 1, 2, 3, 4 and 5% (by the weight of optimum bitumen) with 80/100 penetration grade bitumen at temperature of 150ºC. It may be inferred that PET-modified bituminous …
Published in Trends in Transport Engineering and Applications · Vol. 2, Issue 2, 2015 · pp. 12–16 Read article
-
Partograph: An Essential Tool for Midwives to Manage Labor at Public Health Institutions in Tigray, Northern Ethiopia
Abstract: A partograph is a graphical presentation of a woman’s progress of labour. Once the woman has true signs of labour and reaches active first stage of labor, the midwife initiates the use of the partograph to record her findings. Prolonged labor; mainly due to cephalopelvic disproportion (CPD), which may result in obstructed labor, maternal dehydration, ruptured uterus, obstetric fistulae, fetal asphyxia, fetal brain damage, infection and death of both mother …
Published in Research and Reviews : A Journal of Immunology · Vol. 5, Issue 3, 2015 · pp. 23–29 Read article
-
Nasal Medication Conveyance Framework: An Approach for Brain Delivery from Essential to Cutting Edge
Abstract: For the past few years, nasal drug delivery has provided attractive niche to the formulation scientists. It is the first choice as targeted drug delivery when one requires it for brain targeting. In addition, absorption of drug at the olfactory region of the nose provides a potential for a pharmaceutical compound to be available to the central nervous system. The nasal delivery of vaccines is another very attractive application in …
Published in Research and Reviews: A Journal of Medicine · Vol. 6, Issue 1, 2016 · pp. 14–27 Read article
-
Shape-Memory Polymer Systems in Custom-Fit Prosthetic and Orthotic Design
Abstract: SMP systems have now become important materials in constructions of custom-made prosthetic and orthotic devices. They can back and forth change shape based on heat, humidity or light. The capability allows physicians and patients to shape the devices quickly and change them in real time which is not possible with ordinary plastics. Antinomy, comfort is vital and distribution of forces changes continuously in the rehabilitation engineering. The solution to these …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 254–263 Read article
-
Artificial Intelligence-Based Optimization of Mechanical and Biocompatible Properties in Polymer Composite Implants
Abstract: Artificial Intelligence (AI) has already become a ground-breaking tool of streamlining polymer composite implants to enhance both mechanical strength and biocompatibility simultaneously. This paper recommend an AI-based multi-objective optimization model, which integrates the selection of materials, structural modelling, and biological evaluation. The in vitro biocompatibility indicators, including cytotoxicity and cell adhesion, can be used to model mechanical behavior, e.g. stress-strain behavior and fatigue behavior. To arrive at an optimal material …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Machine Learning–Assisted Design of High-Performance Biomedical Polymer Composites
Abstract: The high-performance biomedical polymer composite design needs to represent a trade-off between the strength, biocompatibility, and degradation that cannot be accomplished using conventional design methods. The study aims to develop a predictive and optimization framework of composite properties with the help of machine learning. The methods include ANN, SVM, Random Forest, and Gradient Boosting with experiment and simulation data. The results of Gradient Boosting show that the accuracy is 95.9 …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Enhanced Room-Temperature Gas Sensing Performance of 2% Mn-Doped Sri Lankan Natural Graphite Thin-Film Sensors for Ammonia, Acetone, and Ethanol vapors Detection
Abstract: The development of room-temperature gas sensors with high sensitivity, fast response, and low-cost remains a critical challenge for environmental monitoring and safety applications. In this work, we report the fabrication and characterization of a 2% Mn-doped Sri Lankan natural graphite thin-film sensor for the detection of ammonia (NH3), ethanol (C2H5OH), and acetone (C3H6O) vapors under ambient conditions. The sensor was prepared using the doctor-blade coating method on Indium Tin Oxide …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 13, Issue 2, 2026 · pp. 39–49 Read article
-
Mechanical Characterization of Bio-Based Polymer Composites Manufactured by Additive Manufacturing
Abstract: The use of bio-based polymer composites in additive manufacturing is becoming more and more attractive, but their mechanical properties are very sensitive to the loading of reinforcement, the orientation of the raster and defects of the printing process. In this study, the mechanical properties of PLA–bagasse composites produced by material extrusion were studied, focusing on the influence of the reinforcement fraction and the deposition structure. The composites were tested with …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Hybrid Machine Learning and Finite Element Framework for Predicting Damage Behavior in Fiber-Reinforced Polymer Composites
Abstract: Fiber Reinforced Polymer (FRP) composites have broad spread use in aerospace, automotive, marine and structural applications due to its high specific strength, stiffness and corrosion resistance. The various damage mechanisms such as matrix cracking, fiber breakage, delamination and interfacial failure, however, make the forecasting of damage particularly complex. In this work, a hybrid machine learning (ML) and finite element (FE) system is proposed for predicting the damage behavior of FRP …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Essential Self-Breast Examination for Both Men and Women
Abstract: Breast self-examination stands as a crucial and foundational technique for the early detection of irregularities within the breast tissue, including both the breast itself and the nipple. This method is accessible and relevant to individuals of all genders, involving fundamental principles of observation and palpation. Those well-versed in breast self-examination possess the knowledge to guide others in this practice, which can lead to early intervention and, ultimately, the prevention of …
Published in International Journal of Midwifery Nursing And Practices · Vol. 1, Issue 2, 2023 · pp. 19–23 Read article
-
Functionally Graded Natural Fibre and SiC-reinforced Polymer Composite: Mechanical Properties
Abstract: Multifunctional materials, also called functionally graded materials (FGMs), are based on natural fibres or fillers and vary in composition and/or microstructure to control functional, structural, or thermal, properties. Functionally graded materials (FGMs) have been created for use in spacecraft, aircraft, and other engineering applications because they can withstand extremely high temperatures. Particle-reinforced FGMs, which make up the majority of FGMs, are made differently depending on their position. The mechanical and …
Published in Journal of Polymer & Composites · Vol. 11, Issue 4, 2023 · pp. 1–14 Read article
-
The Essential Importance of Tactile Experience in Universal Design
Abstract: This research paper explores the synergy between tactile experience and Universal Design, investigating how integrating tactile elements enriches inclusivity, accessibility, and usability. Through a comprehensive literature review, it examines existing studies on Universal Design, tactile perception, and touch's role in design. The paper introduces theoretical frameworks to support the crucial link between tactile experience and inclusivity. It delves into the physiological and psychological aspects of tactile perception, highlighting how tactile …
Published in Emerging Trends in Symmetry · Vol. 1, Issue 1, 2025 · pp. 01–14 Read article
-
Considerations on Fractured Edge Dislocations of Mechanical Tested Hand Laid Hemp Flax GFRP Hybrid Polymer Composites with SEM Verifications
Abstract: In this research study, three types of composite samples are made. Hemp-Glass Fiber (C1), Flax- Glass Fiber (C2), and Hemp-Flax-Glass Fiber Hybrid Composite (C3). For proper fibre-to-fiber adhesion and bonding, a 10:1 mixture of glue (LY556) and brace (HY951) was used. Tensile, flexural, impact, double shear, and hardness research is conducted among all the specimen samples. According to ASTM standards, the comparison is made among C1, C2 and C2 respectively; …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 1–19 Read article