Search
97 articles for “voids”
-
Effect of Barium Sulphate on Mechanical Properties of Woven Aloe Vera/Flax Reinforced Epoxy Composites
Abstract: Natural fiber-reinforced composites are becoming popular because of their lightweight, eco-friendly, and sustainable nature. Nevertheless, single-fiber composites tend to exhibit poor mechanical performance. This research paper has created a hybrid composite bonded with woven Aloe vera and flax reinforced with an epoxy bond. Barium sulphate (BaSO4) filler was added to further improve the properties. The fibers were subjected to sodium hydroxide (NaOH) to enhance bonding with the matrix and the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 355–365 Read article
-
A Hybrid model of ResNet50 integrated U-Net for image Denoising for Polymer and Composite Microstructure Analysis
Abstract: In digital era a high-quality imaging plays a very important role in polymer and composite material characterization features such as fiber-matrix interfaces, voids, microcracks cause problems in mechanical and functional properties. Polymer imaging includes optical microscopy and scanning electron microscopy, due to sensor limitation, environmental conditions add noise to the image and reduce quality of image. The noise degrades image quality, and it leads to reduce reliability in material analysis. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 592–602 Read article
-
Experimental Study and Comparative Analysis of Fly Ash, GGBS, and Silica Fume in Nominal Concrete and Ternary Blended M25 Concrete
Abstract: This study examines the effects of partially substituting 30% of cement by weight with ternary supplemental cementitious materials (TSCMs) with mix proportions of M1, M2, and M3. These materials include fly ash (10%,15%,15% in M1, M2, and M3), ground granulated blast furnace slag (GGBS) (10%,8%,10% in M1, M2, and M3), and silica fume SF (15%,10%,5% in M1, M2, and M3) on the mechanical and durability properties of M25 grade concrete …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 43–50 Read article
-
Flexural Response and Numerical simulation of Unidirectional Areca–Pineapple Leaf Fiber Hybrid Epoxy Composites
Abstract: The increasing demand for lightweight and environmentally sustainable materials has accelerated the development of natural fiber-reinforced polymer composites for engineering applications. In the present study, unidirectional areca and pineapple leaf fiber (PALF) reinforced hybrid epoxy composites were fabricated using a simple hand lay-up process. Before fabrication, the fibers were chemically treated to improve fiber–matrix adhesion and enhance the mechanical performance of the laminates. Four different stacking sequences (A8, A7P1, A6P2, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Evaluation of Physico-mechanical Properties of Aluminium-based Matrix Reinforced with SiC and Porcelain for Automotive Components
Abstract: The present study examines an effort to synthesize the composition of the hybrid metal matrix, by using aluminium-based matrix reinforced with silicon carbide and ceramic porcelain material. Weight reduction and reliability of components are the main priorities when developing automotive parts, it is essential to select and use materials with a high strength to weight ratio. It was feasible to identify an appropriate material for automotive applications by using this …
Published in Journal of Automobile Engineering and Applications · Vol. 6, Issue 3, 2019 · pp. 37–43 Read article
-
Modern Biomaterials: Biologically Sensitive Hydrogel Materials
Abstract: Modern biomaterials and biological products are interacting at a more clearly defined interface. Hydrogels, a category of highly hydrated biomaterials, are significant. With interstitial voids that are up to 90% water by weight, hydrogels are made of elastic networks. They are created either physically or chemically by self-assembling building blocks that areeither created artificially or organically. Macromolecules in a range of structures, such as cross-linked polymers, entangled fibrillar networks, or …
Published in Journal of Catalyst & Catalysis · Vol. 9, Issue 2, 2022 · pp. 26–30 Read article
-
Modeling and Numerical Simulation of Forged Ploughing Disc
Abstract: Forging operation is the oldest metal forming process known for producing a product of a reduced void and improved physical properties which make it suitable for manufacturing of a ploughing disc that can be applied in sticky soil, for deep plough. It can also be used safely in stony and stumpy soil without much danger of breakage. This study focuses on identifying appropriate parameters for the manufacturing of a proper …
Published in Journal of Experimental & Applied Mechanics · Vol. 10, Issue 1, 2019 · pp. 35–42 Read article
-
Prediction Of Compression Index For Lateritic Soil Using Transformed Variable
Abstract: The information on the compression index of a soil is vital in geotechnical design, but its determination is expensive and time consuming. Most models relating compression index and basic soil properties are usually based on soil types. This work seeks to develop a model relationship between compression index and basic soil properties for lateritic soils. Selective transformation method which involves testing some general functional forms, to choose the model that …
Published in Journal of Geotechnical Engineering · Vol. 5, Issue 3, 2018 · pp. 14–23 Read article
-
Effect of Tool Tilt on Formation of Tunnel in Friction Stir Welded 5083 Joints: An Experimental Study
Abstract: Friction stir welding (FSW) being a solid-state joining process is immune to the various defects faced in traditional fusion welding process. However, defects such as voids, joint line remnants and tunnel defects are common imperfections in FSW. In the present study, an attempt has been made to investigate the effect of tool tilt on the formation of tunnel defect, while keeping all other process parameters constant. Tool tilt is a …
Published in Journal of Materials & Metallurgical Engineering · Vol. 4, Issue 2, 2014 · pp. 10–15 Read article
-
Investigate the Physical and Mechanical Properties of Short Coconut, Short Bamboo Fibers and Short Glass Fiber Reinforced Phenol Formaldehyde Composites
Abstract: In the field of research, the composite materials become the dominant materials from last forty years. Because of eco-friendly nature and sustainability, the researchers are using natural fibers in polymer composites to obtain good thermal, acoustic insulating properties, excellent formability and weight-resistance compared to traditional building materials. In the present research work, seven different fiber reinforcement Phenol formaldehyde matrix polymer composite i.e., short coconut, short bamboo and short glass fiber …
Published in Journal of Polymer & Composites · Vol. 8, Issue 3, 2020 · pp. 53–61 Read article
-
An Approach on Optimization of Thermo Physical Properties of Teak Wood Dust Filled Polymeric Composites
Abstract: The aim of the present work was to prepare the specimens with the help of hand-lay-up technique to measure the thermal properties of TWDPC. The density & voids of TWDPC were measured to determine its physical property & significantly affected some of its mechanical properties. Taguchi experimental method was applied to optimize its thermal properties. The optimal factor combinations were determined with the help of ANOM & the analysis of …
Published in Journal of Polymer & Composites · Vol. 9, Issue 3, 2021 · pp. 67–80 Read article
-
IMPACT OF HYDRATED LIME AND SBS ON HMA MOISTURE SUSCEPTIBILITY
Abstract: Abstract In recent years, many of the newly built asphalt and concrete roads in Baghdad and other Iraqi cities have broken down too soon. This has hurt the country's economy and public safety. One of the main reasons why these newly built roads break down is because of water damage. Leaking water weakens the bond between the aggregate and the asphalt, which makes it more likely that sidewalks will fall …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 81–93 Read article
-
Investigation on Mechanical Properties of Bamboo-Plastic Composites by Alkali Treatment and Illustration via Scanning Electron Microscopy
Abstract: The morphological properties, tensile and flexural strength of composite materials made of bamboo fibres and plastic were investigated. Bamboo-plastic composites (BPCs) were made from bamboo fibres, plastic, and urea formaldehyde (UF) resin to evaluate the effects on mechanical properties. Two different types of plastics, namely polypropylene (PP) and low-density polyethylene (LDPE) were used to make the composite fabrication. The bamboo fibres were extracted after soaking them in a sodium hydroxide …
Published in Journal of Polymer & Composites · Vol. 11, Issue 3, 2023 · pp. 86–95 Read article
-
Improved Prediction of Fluid Contacts using Calibrated Material Balance Models
Abstract: The demand for oil has been on the high in the recent past and will continue as search for sustainable alternative energy sources intensifies. The exploration and exploitation of oil from subsurface reservoirs have posed several environmental challenges which include flaring and improper water disposal to name a few, caused by excessive production of gas and water. Hence, it is important to establish a reservoir performance monitoring scheme that will …
Published in Journal of Petroleum Engineering & Technology · Vol. 4, Issue 2, 2014 · pp. 25–36 Read article
-
Thin-in-slab-in-caster to Pursue Heat-in-treat
Abstract: This paper is to resolve the latest scenario in slab caster to suggest fabrication of slab after integrating as well successive next add an addendum formation to end production. Direct thin section produced from existing heat in cast thin slab has been utilized by successive roll reduction and also heat treatment. Endless strip processing (ESP) has linked continuous thin down formation to subject modification of microstructure from as cast to …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 8, Issue 1, 2021 · pp. 30–37 Read article
-
Improving Highway Surface Course Properties of Asphalt Concrete for Heavy Traffic Loading using Mineral Fillers
Abstract: Failure signs seen on both rigid and flexible pavement as distresses is most often instigated by mix properties of the surface due to many factors. Traffic loading, Stripping or raveling is another possible cause of such effects. Stripping occurs when poor adhesion between asphalt cement and aggregate allows the aggregate at the surface to dislodge. As a result, mineral fillers in hot-mix asphalt concrete to obtain certain desirable properties has …
Published in Recent Trends in Civil Engineering & Technology · Vol. 10, Issue 2, 2020 · pp. 12–22 Read article
-
Study of Mechanical Properties of Self-compacting Concrete
Abstract: Self-Compacting Concrete (SCC) is a high performance concrete, it is able to flow under its own weight, completely filling formwork and achieving full compaction, even in the presence of congested reinforcement. Self Compacting Concrete has excellent high resistance to segregation and fluidity ensures a high level of homogeneity, minimal concrete voids and uniform concrete strength, providing the potential for a superior level of finish and durability to the structure. This …
Published in Recent Trends in Civil Engineering & Technology · Vol. 5, Issue 1, 2015 · pp. 12–18 Read article
-
Effect of Relative Compaction and Percent Fines on the Permeability of Soil
Abstract: Permeability is the major property of soil affecting various engineering aspects. It is one of the indispensable soil properties which are to be taken utmost care of in soil problems like settlement of foundations, seepage through and below the earth structures like dams, yields of wells, constructions of highway roads, etc. The aim of this research is to reduce the permeability of soil sample by varying the percentage of percent …
Published in Recent Trends in Civil Engineering & Technology · Vol. 3, Issue 2, 2013 · pp. 40–48 Read article
-
Study of Wear Behaviour of GFRP Composites filled with Nanofiller using Taguchi Technique
Abstract: AbstractThe GFRP laminates are fabricated by hand lay-up process followed by vacuum bag curing and post cured in a heating oven. The laminates are fabricated with addition of 1%, 1.5% and 2.0% graphene filler and prepared laminates are cut into ASTM standards by using water jet cutting. The density and volume fraction of the void fabricated composite is determined. The three-body abrasive wear test is carried out on abrasion tester …
Published in Recent Trends in Fluid Mechanics · Vol. 5, Issue 3, 2018 · pp. 33–38 Read article
-
Performance Evaluation of Modified Cold Mix Asphalt by Some Waste Materials
Abstract: The aim of study is to evaluate modified CMA volumetric, mechanical and durability properties by some waste materials. Previous studies described that the mechanical properties of CMA are shown to be influenced by different factors including base bitumen grade, porosity of the mix, curing time and additives. The current research is designed to use the waste and by-product materials as filler to enhance the conventional CMA early age strength. Hence, …
Published in Trends in Transport Engineering and Applications · Vol. 3, Issue 3, 2016 · pp. 33–53 Read article