Search
271 articles for “durability properties”
-
Experimental Study on the Strength Enhancement of Carbon Fiber Reinforced GGBS Concrete
Abstract: This study provides an in-depth analysis of the experimental investigation conducted on carbon fiber reinforced GGBS concrete (CFRGC). The primary objective of the research was to evaluate the effects of carbon fibers on various mechanical properties of concrete, with a particular focus on strength parameters. In this study, the carbon fiber content was systematically varied from 0.5% to 1.5% by weight of cement, in increments of 0.5%, to determine the …
Published in Journal of Structural Engineering and Management · Vol. 11, Issue 3, 2024 · pp. 36–50 Read article
-
Enhancing Mechanical and Thermal Performance of M30 Concrete with Carbon Fibre Reinforcement
Abstract: This study examines the influence of carbon fibre incorporation on the mechanical properties of M30-grade concrete. A series of experimental investigations were conducted to assess the effects of varying carbon fibre content on compressive, split tensile, and flexural strengths. The results indicate a significant enhancement in mechanical performance with the inclusion of carbon fibres, with the optimum fibre dosage identified as 0.75%. At this content, the concrete achieved a peak …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 252–260 Read article
-
Comparative Study on Thermal Performance of Mud Rammed and Concrete Residential Building Envelope in Paro - Bhutan
Abstract: A key factor in assessing the total energy efficiency of a building is the thermal performance of the building envelope. In Bhutan the building energy sector accounts for 15% of the total domestic electricity consumption out of which 50 to 60% accounts for space heating in the temperate region. Previous research findings and data also indicate that heat loss or gain through the building envelop were the most significant contributor …
Published in International Journal of Energy and Thermal Applications · Vol. 4, Issue 1, 2026 · pp. 9–16 Read article
-
Development of a Durable Superhydrophobic EP/PDMS Coating Reinforced with Micro-CaCO₃ and Nano-ZnO for Enhanced Corrosion Protection and Multifunctional Performance on Carbon Steel
Abstract: Balancing exceptional multifunctional performance with mechanical robustness in micro-nano composite films remains a significant challenge for practical applications. In this work, a superhydrophobic coating reinforced with micro-CaCO₃ and nano-ZnO particles was fabricated through a versatile single-step brushing method. The optimized EP/PDMS@micro-CaCO₃/nano-ZnO coating achieved a water contact angle (WCA) of 173.54° ± 2.53° and a sliding angle (SA) of 1.50° ± 1.12°. Owing to its carefully engineered micro-nano hierarchical structure, the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 216–238 Read article
-
A Review on Banana Fiber Reinforced Polymer Composites through Advanced Surface Treatments and Manufacturing Techniques
Abstract: In today's rapidly evolving world, heightened environmental concerns and stringent government regulations have spurred scientists and researchers to seek biodegradable and renewable alternatives to synthetic materials. Natural fibers, derived from resources like banana, jute, bagasse, and sisal, offer distinct advantages such as low density, comparable strength, non-toxicity, cost-effectiveness, and minimal waste disposal issues over synthetic counterparts. Extensive research has explored the potential applications of these natural fibers, with banana fibers …
Published in Trends in Mechanical Engineering & Technology · Vol. 14, Issue 3, 2024 Read article
-
A Review of Glass Fiber Reinforced Composite Materials - Advancements and Challenges
Abstract: The use of glass fiber reinforcement has transformed modern engineering by providing an exceptional balance of strength, lightweight characteristics, and adaptability. This comprehensive review synthesizes findings from over 150 scholarly articles to provide an in-depth analysis of glass fiber reinforcement across multiple sectors. The exploration covers its historical development, manufacturing processes, and diverse applications in aerospace, automotive, construction, marine, and renewable energy industries. Glass fiber’s exceptional strength-to-weight ratio, corrosion resistance, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 635–656 Read article
-
Polymer-Based Nanocomposites: Synthesis, Properties, and Applications
Abstract: Polymer-based nanocomposites have emerged as a highly promising class of materials, offering enhanced mechanical, thermal, and electrical properties. By incorporating nanoscale fillers such as carbon nanotubes, graphene, and metal oxides into polymer matrices, these composites exhibit superior strength, conductivity, and durability compared to conventional polymer materials. Their tunable properties make them highly versatile, with applications spanning multiple industries, including biomedical engineering, electronics, and automotive manufacturing. The synthesis of polymer nanocomposites …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 222–227 Read article
-
Photonic Polymer Composites for Light-Modulating Displays and High-Throughput Optical Data Transmission
Abstract: The combination of PMMA-based composites recently received substantial attention from the photonic applications field since these materials combine excellent optical transparency, mechanical flexibility and straightforward fabrication capabilities. The material performance of pure PMMA requires functional additives because it shows limited thermal properties and optical attenuation in addition to sensitivity against UV rays. The research explores developmental pathways for PMMA composites through combined use of nanoparticles and electro-optic polymers with dopants …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 838–860 Read article
-
Mechanical Characterization of Prosopis Juliflora Fibre-Reinforced Epoxy Composites for Sustainable Automotive Applications
Abstract: This study investigates the potential of Prosopis juliflora (PJ) fibre as an eco-friendly, economical, and mechanically efficient reinforcement for epoxy-based polymer composites. Composite samples were produced using the compression moulding technique with epoxy-to-fibre weight ratios of 90:10, 85:15, and 80:20. Mechanical tests, including tensile, flexural, impact, and hardness evaluations, were conducted in accordance with relevant ASTM standards. The incorporation of PJ fibre resulted in significant improvements in the mechanical behaviour …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1720–1728 Read article
-
Rubber Materials: Synthesis, Key Properties, and Cutting-Edge Applications
Abstract: Because of its special blend of flexibility, durability, and ability to adapt, rubber and rubber products have long been essential to many different sectors. The synthesis processes used to produce rubber are discussed in this overview, with a focus on developments in polymer chemistry and processing approaches that improve material qualities. Important characteristics, including tensile strength, resilience, and chemical resistance are brought out, highlighting their significance in a variety of …
Published in International Journal of Industrial and Product Design Engineering · Vol. 3, Issue 1, 2025 · pp. 12–23 Read article
-
Innovative Porcelain Insulators: Prolonged Durability and Anti-Contamination Efficiency via Nano-TiO2 Photocatalyst Integration
Abstract: Porcelain has long been a critical material in high-voltage electrical insulation due to its exceptional mechanical, thermal, and dielectric properties. However, environmental contamination and material degradation over time pose significant challenges to its durability. This study investigates the integration of nano-sized titanium dioxide (TiO2) photocatalyst coatings on porcelain insulators to enhance their performance and prolong their operational lifespan. Local clay compositions were analyzed, and a comparative study of untreated and …
Published in International Journal of Crystalline Materials · Vol. 1, Issue 2, 2024 · pp. 18–23 Read article
-
Evaluating the Optimal Alccofine-1203 Replacement Ratio in M20 Grade Concrete
Abstract: The primary objective of this research is to investigate the potential of partially replacing cement with Alccofine 1203 in M20 grade control concrete and to evaluate the resulting effects on the mechanical properties of the concrete. Alccofine 1203, a high-performance mineral admixture known for its ultrafine particle size and high reactivity, was used as a partial cement substitute at varying replacement levels of 5%, 10%, and 15% by weight of …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 294–299 Read article
-
Investigating the Effect of Rubber as Partial Coarse Aggregate Replacement on Concrete Performance
Abstract: The growing challenge of managing scrap tire waste presents an opportunity for recycling these durable materials into concrete production. This research investigates the mechanical properties of concrete with waste tire rubber chips incorporated as a partial replacement for coarse aggregates at 0%, 5%, 10%, and 15% by volume. The study evaluates workability, compressive strength, and tensile strength, alongside durability assessments in a 5% sulphuric acid solution. Initial findings indicate that …
Published in Journal of Industrial Safety Engineering · Vol. 11, Issue 3, 2024 · pp. 11–17 Read article
-
Enhancement in Performance of Conventional concrete mixes by using hybridization with steel & polypropylene fibres
Abstract: This experimental study evaluates the influence of incorporating steel and polypropylene fibers on the mechanical performance of high- performance concrete (HPC) across M30, M35, and M40 grades. This research focuses on evaluating the mechanical properties of High- Performance Concrete (HPC) enhanced with a hybrid reinforcement system consisting of steel fibers (SF) and polypropylene fibers (PPF). Steel fibers are utilized to improve the compressive and tensile strengths, while polypropylene fibers contribute …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 3, 2025 Read article
-
Geotechnical Analysis and Performance Evaluation of Subgrade Materials in Road Construction
Abstract: Geotechnical engineering plays a pivotal role in the design, construction, and long-term maintenance of infrastructure, particularly in road construction, where subgrade conditions are directly linked to pavement performance, durability, and overall structural integrity. The performance of a road is heavily influenced by the geotechnical properties of the subgrade, making it essential to thoroughly assess these properties in the planning and construction phases. This study comprehensively investigates the geotechnical characteristics and …
Published in Journal of Geotechnical Engineering · Vol. 11, Issue 3, 2024 · pp. 24–29 Read article
-
Evaluate and Compare the Effect of Water of Different Hardness Levels on the Surface Irregularity in 3 Different Heat-Polymerized Denture Base Resins
Abstract: This study aimed to evaluate and compare the effect of water with varying hardness levels on the surface irregularity of three different heat-polymerized denture base resins. The hardness of water used in dental applications has been shown to influence the properties of dental materials, including denture base resins. In this study, three commonly used heat-polymerized denture base resins were subjected to immersion in water with different hardness levels. The surface …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 130–136 Read article
-
Influence of Nozzle Temperature, Nozzle Diameter, and Layer Height on Tensile and Hardness Characteristics of 3D Printed CF-PLA
Abstract: This research investigates the mechanical characterization of CF-PLA (Carbon Fiber-reinforced Polylactic Acid) composite material produced using Fused Deposition Modeling (FDM) technology. The study investigates the impact of different machine parameters, like nozzle temperature, nozzle diameter, and layer height, on the tensile property and hardness of CF-PLA specimens. A total of 27 samples were produced, each with different combinations of nozzle temperature (190°C, 200°C, and 210°C), nozzle diameter (0.4mm, 0.5mm, and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 674–681 Read article
-
Enhance Thermal and Conductive Properties through Graph Neural Network-Based Machine Learning-Driven Advanced Polymer Material Design
Abstract: Advanced polymer materials are widely used in modern engineering and manufacturing because of their lightweight nature, flexibility, durability, and adaptability to different applications. However, designing polymer materials with enhanced thermal and electrical properties remains a challenging task. The performance of polymers is influenced by a complex combination of molecular structures, filler materials, processing parameters, and nanoscale interactions. Conventional optimization methods often require extensive experimental trials and computational resources, making it …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Multifunctional Materials for Electro-Mechanical Applications: Synergistic Integration of Strength and Conductivity
Abstract: The integration of mechanical strength and electrical conductivity within a single material system has emerged as a critical requirement in the development of next-generation multifunctional materials. These materials are increasingly sought after in fields such as aerospace, flexible electronics, energy storage, and structural health monitoring, where the traditional separation of structural and functional materials leads to inefficiencies in weight, space, and overall performance. The convergence of these properties enables compact …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 3, Issue 1, 2025 · pp. 1–6 Read article
-
Viscoelastic Behavior, Interfacial Mechanics, and Reliability of Polymer Interlayers in Laminated Glass Composites: A Comprehensive Review
Abstract: The laminated glass systems are regarded as hybrid polymer–glass composites where the viscoelastic behavior of polymer interlayers mostly controls mechanical response. These interlayers (polyvinyl butyral (PVB), ionoplast, ethylene-vinyl acetate (EVA), etc.) have time-, temperature- and rate-dependent properties which significantly affect shear transfer, energy dissipation, and fracture resistance. But the baseline polymer-relevant processes at the molecular and interfacial level are to a large extent unknown [1]. This review provides a materials-focused …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 258–268 Read article