Search
424 articles for “deposition”
-
Thin Film Technology in Sensor Manufacturing – A Technical Discussion
Abstract: Thin‑film technology has become the cornerstone of modern sensor manufacturing, enabling the convergence of miniaturisation, multifunctionality, and cost‑effective mass production. This paper surveys the latest advances in deposition techniques—ranging from magnetron sputtering and chemical vapour deposition to atomic‑layer deposition (ALD) and ink‑jet‑printed sol‑gel processes—and examines how their unique material‑control capabilities translate into performance gains across the sensor spectrum (chemical, physical, and bio‑sensing). By integrating nanoscale thickness control (≤ 10 nm) …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 13, Issue 1, 2026 · pp. 47–57 Read article
-
Development of EDM Electrode by Powder Metallurgy Process
Abstract: The EDM electrode is specially made of tungsten powder by powder metallurgy process. Negative or reverse polarity is used for better results of layer deposition of electrode material of tungsten powder and carbon particles within the dielectric liquid used for machining. The work piece is of low carbon steel or HSS. It is observed that tungsten carbide layer deposited on the work piece has better performance characteristics for application. In …
Published in Trends in Mechanical Engineering & Technology · Vol. 3, Issue 2, 2013 · pp. 10–15 Read article
-
Effect of Anodization Process Parameters on Morphology of Porous Anodic Aluminum Oxide and Carbon Nanotubes Grown by CVD
Abstract: Normal 0 false false false EN-US X-NONE X-NONE Synthesis of well-ordered carbon nanotubes (CNTs) can be achieved by chemical vapor deposition (CVD) of a carbon source onto a porous anodic aluminum oxide (PAAO) template. The structure of the PAAO template or film is a close-packed array of hexagonal cells, each containing a cylindrical central pore that is perpendicular to the surface of the underlying aluminum substrate. The diameter, depth and …
Published in Journal of Production Research & Management · Vol. 1, Issue 3, 2011 · pp. 1–16 Read article
-
An Overview of Surface Coating Methodologies and Their Use in Technical Materials
Abstract: To safeguard the product or structure against chemical harm, a variety of procedures and materials can be applied in coating applications today. Nowadays, coatings are used extensively in manufacturing all over the world to increase efficiency and reduce expenses two factors that are essential to preserving the sector's profitability. Coated materials have greater strength compared to uncoated materials. A variety of materials, including bio glass, polymers, ceramics, strong and hard …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 19–35 Read article
-
Eco-Friendly Innovations: A Review of 3D Printing with Biodegradable Filaments.
Abstract: This comprehensive review paper delves into the evolving landscape of sustainable additive manufacturing, focusing on the utilization of biodegradable filaments in 3D printing technology. As industries increasingly prioritize sustainability, the adoption of eco-friendly practices like biodegradable materials becomes imperative. The study explores the composition and properties of biodegradable filaments, highlighting their transformation from traditional plastic fibres and the environmental benefits they offer. With a particular emphasis on fused deposition modeling …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 86–102 Read article
-
The Role of Precision Agriculture in Enhancing Horticultural Crop Yields
Abstract: This article explores the quantification of lithium and mapping of mineral composition in crushed lithium ore utilizing two distinct calibration techniques with Laser-Induced Breakdown Spectroscopy (LIBS). Thirty samples from a pegmatite lithium deposit were analyzed, with representative mineral samples extracted, mixed with resin, and polished into disks. These disks underwent examination via an analyzer and an integrated mineral analyzer, facilitating mineral identification. The first calibration technique used empirical mineral chemistry …
Published in International Journal of Trends in Horticulture · Vol. 1, Issue 1, 2024 · pp. 18–23 Read article
-
Thin Film Coatings for Anti-Reflective and Anti-Fogging Applications in Optical Devices
Abstract: To maximize optical device lifetime and performance, thin film coatings are crucial. Coatings with anti-reflective (AR) and anti-fogging (AF) properties are important uses that improve optical systems' usability and performance. This review covers materials, deposition methods, and performance measures, providing a thorough analysis of recent developments in AR and AF thin film technologies. The study examines several techniques, such as chemical vapor deposition (CVD), sputtering, and sol-gel procedures, for producing …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 11, Issue 2, 2024 · pp. 26–30 Read article
-
The State of Air Quality: Pollution Sources, Health Implications, and Future
Abstract: Air quality is a critical component of environmental health, significantly affecting human well-being and ecological balance. Poor air quality has been related to a variety of health issues, including respiratory and cardiovascular disorders, and it is a major cause of early death worldwide. Understanding the origins, kinds, and impacts of air pollutants is critical for establishing effective pollution-reduction initiatives. This review focuses on the principal pollutants that affect air quality, …
Published in International Journal of Atmosphere · Vol. 1, Issue 2, 2024 · pp. 1–4 Read article
-
Thin Film Solar Cells: Progress in Materials, Fabrication, and Efficiency Enhancements
Abstract: Thin film solar cells (TFSCs) have drawn a lot of interest because of their potential for efficient and reasonably priced photovoltaic energy conversion. Their flexibility, low weight, and lower material consumption make them a desirable substitute for conventional solar cells made of crystalline silicon. This review explores recent advancements in TFSC technology, with a focus on materials, fabrication techniques, and efficiency improvements.Various thin-film materials, such as amorphous silicon (a-Si), perovskite, …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 1, 2025 · pp. 37–42 Read article
-
Experimental Investigation on Mechanical Characterization of Electrodeposited Shot Peened Copper Coated and Un-Coated Mild Steel
Abstract: The fatigue strength of fabricated copper coating on mild steel specimens under repeated loading and the overall number of cycles to failure has been investigated. The specimens of copper coating on mild steel substrate are fabricated by using an electro deposition shot peening method. The hardness behaviour of fabricated specimens studied and the experimental work has been carried out by using Vickers Micro Hardness under the load of 20N force. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 279–288 Read article
-
AI-Enabled Optimization of Additively Manufactured Composite Materials for Enhanced Mechanical and Thermal Performance
Abstract: This paper discusses the optimization of multi-objective optimization of enhanced coupling of heat and mechanical properties of 3D printed polymer composite materials by artificial intelligence (AI), as a component of a multi-objective optimization framework. It aims at development of nonlinear printing parameters and material properties relationships to achieve maximum tensile strength and thermal conductivity in polymer composites produced through fused deposition modeling (FDM). Short carbon fiber reinforcement was used to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 867–891 Read article
-
IoT-Based Smart Waste Tracking & System for Monitoring
Abstract: In an era of rapid urban growth—driven by continued population growth and greater waste dispersion due to unregulated disposal practices by all citizens—a major challenge is emerging in the effective management of solid waste in urban environments. This project proposes a solution to this challenge: a Smart Waste Tracking & System for Monitoring. In this system, every household is provided with an RFID card, which they must use each time …
Published in International Journal of Environmental Noise and Pollution Control · Vol. 4, Issue 2, 2026 · pp. 12–23 Read article
-
Synthesis and Characterization of In2S3 Nanoflake Thin Film for Photosensor Applications
Abstract: Indium sulphide (In2S3) thin films in the form of nanoflakes are synthesized by using chemical vapour deposition method on glass substrate with the intension to test its photosensor applications. These as deposited nanoflake thin films are characterized for physicochemical properties using X-ray diffraction (XRD) pattern, energy dispersive X-ray (EDAX) analysis,scanning electron microscopy (SEM) while optoelectronic properties were studied using optical and electrical characteristics obtained through UV-Vis transmission spectroscopy and I-V …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 4, Issue 3, 2017 · pp. 21–26 Read article
-
Development of Multilayer Metallic Coatings with Graded Interfaces for Enhanced Wear and Fatigue Resistance in Aerospace Components
Abstract: This study presents a comprehensive investigation into the development and characterization of multilayer metallic coating systems with compositionally graded interfaces, specifically engineered to enhance wear and fatigue resistance in aerospace structural and rotating components. Four coating architectures were systematically designed: (i) CrN/TiAlN bilayer, (ii) TiN/TiAlN/TiAlSiN gradient trilayer, (iii) CrAlN/AlCrN nanolaminate, and (iv) a novel five-layer CrN–TiN–TiAlN–AlCrN–TiAlSiN functionally graded system (FGS). Coatings were deposited via high-power impulse magnetron sputtering (HiPIMS) and …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 13, Issue 2, 2026 · pp. 50–67 Read article
-
Enhancement of Bioavailability of Clopidogrel Using Different Solubility Enhancement Techniques
Abstract: Bioavailability is the key determinant of a drug for its therapeutic effectiveness, which in turn depends upon the solubility of that drug in gastro intestinal fluid. Clopidogrel is a BCS class II drug. Drugs of this category have low solubility and high permeability, so their bioavailability is less. This can be overcome by doing pharmaceutic modifications on it. In the present study, three different modifications, namely, complexation, solvent deposition and …
Published in Research and Reviews: A Journal of Pharmaceutical Science · Vol. 7, Issue 2, 2016 · pp. 25–39 Read article
-
Opto-electrical and Structural Properties of CuxO Thin Films grown by R. F. Sputtering Method
Abstract: CuxO (0<x<1) thin films were deposited on glass substrate by r. f. sputtering method at different r. f. power in an atmosphere of O2 and Ar. The conditions for deposition of CuxO thin film were optimized by varying the r. f. power for the deposition to vary the energy band gap of the deposited film. Structural characterizations were performed by XRD and TEM studies. The films deposited on glass substrate …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 2, Issue 1, 2011 · pp. 8–15 Read article
-
Recognition and Mapping of Structural Guides for Barytes Mineral Exploration in Parts of Kadapa District using Remote Sensing and GIS
Abstract: Identification and mapping of structural criteria of a region reveals information about the occurrence of ore deposits of igneous and metamorphic origin. Remote Sensing and GIS data helps in detection of such structural features, like faults, lineament, folds, etc. These are important guides for exploration of ore mineral and groundwater. Kadapa district hosts important ore minerals of igneous and metamorphic origin like Barytes, asbestos, gold, galena, steatite etc. Barytes is …
Published in Journal of Remote Sensing & GIS · Vol. 9, Issue 3, 2018 · pp. 30–36 Read article
-
Electroplating and Corrosion Properties of Binary and Ternary Zinc Alloys with Nickel, Cobalt and Iron
Abstract: The anti-corrosive three binary (Zn-Ni, Zn-Co, Zn-Fe) and two ternary (Zn-Ni-Co, Zn-Co-Fe) alloy coating films on mild steel from acid chloride bath using sulphanilic acid and gelatin as additives for the electroplating technique. The normal Hull cell method was used to optimize the bath compositions, temperature and pH of the bath solutions for coating performance against corrosion. The cause of current density (CD) on metal weight percentage (M = Ni, …
Published in Journal of Thin Films, Coating Science Technology & Application · pp. 1–7 Read article
-
Problems and Difficulties in the Additive Manufacturing of Composites with Carbon Fiber Reinforcement for Medical Application
Abstract: Amputation is more prevalent than one may think due to an accident, war, or disease. Prosthetics and associated orthotics have a combined global market value of $2.8 billion. Carbon fibre has found a market due to increased demand for foot prostheses. Fused deposition modeling (FDM) is a rapidly advancing three-dimensional (3D) printing technique. PEEK (polyether-ether-ketone) is a biocompatible, high-performance polymer that could potentially be utilised as an orthopedic surgery implant …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 1, Issue 1, 2023 · pp. 8–12 Read article
-
Evaluation of Mechanical Properties of Carbon Reinforced Composite for Different Process Parameters Using FDM
Abstract: Fused Deposition Modeling (FDM) stands as an advanced rapid prototyping technique, widely appreciated for its efficiency in constructing functional components within a reasonable timeframe. In this experimental exploration, a comparative analysis of mechanical properties was conducted on components manufactured through the FDM technique, specifically with a 20% concentration of SCF-PLA. The study considered process variables like layer thickness, infill pattern, and infill density. Employing diverse process parameters, a standard sample …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 218–228 Read article