Search
79 articles for “adhesive properties”
-
Experimental investigation of thermally grown Indium film’s structural and tribological properties
Abstract: Indium thin film growth found numerous applications, such as cold welding of infrared detectors and readout-integrated circuits (ROIC) to form sensor chips. In film is grown on the Si substrate by thermal evaporation. The XRD results indicated the tetragonal bcc phase in the (101) preferential plane. Scanning electron microscopy (SEM) indicated an uniform, continuous film covering the whole surface. The EDS examination confirmed the pure In film. The atomic force …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 58–66 Read article
-
Comprehensive Performance Assessment of Silane-Treated Bio-Extracted Husk Fiber Reinforced Composites for Sustainable Construction Applications
Abstract: This research project is an extensive experimental study on bio-extracted husk fiber polymer composites with a focus on silane surface treatment. Bio-extracted rice husk fibers underwent an alkali-enzymatic hybrid extraction process followed by a 3-aminopropyltriethoxysilane (APTES) treatment for improved interfacial adhesion and matrix compatibility. Resin composites with treated and untreated fibers were fabricated with a weight ratio of 10%, 20%, and 30% via hand lay-up methods. A battery of mechanical …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 229–241 Read article
-
Nutraceuticals as Adjunctive Treatment in Cancer Exploring Efficacy and Mechanism of Action
Abstract: Dietary habits are a critical factor in cancer prevention, with plant-based diets rich in vegetables and fruits associated with reduced cancer risk. Nutraceuticals—bioactive compounds derived from food and supplements—have gained attention for their potential in cancer prevention and therapy. Phytochemicals such as flavonoids, polyphenols, and alkaloids exhibit anti-cancer properties through mechanisms including antioxidant activity, anti-inflammatory effects, inhibition of tumor growth, and induction of apoptosis. Key nutraceuticals include alkaloids (e.g., caffeine, …
Published in Research & Reviews: A Journal of Pharmacognosy · Vol. 12, Issue 1, 2025 · pp. 35–45 Read article
-
Protective Coatings for High-Temperature Applications: Challenges and Innovations
Abstract: High-temperature environments impose significant challenges on materials used in a variety of industrial applications, where components are exposed to extreme heat. These environments can cause a range of issues, including material degradation through processes like corrosion, oxidation, and thermal cycling, which can severely limit the performance, durability, and overall lifespan of components. Over time, these issues may lead to component failure, increased maintenance costs, and even unplanned shutdowns in industrial …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 2, 2025 · pp. 1–9 Read article
-
Investigation of Bio-Physical Interaction and Electrophoretic Properties of Fe3O4/DNA Nanocomposite and Colloids for Biomedical Application
Abstract: In recent years, research on magnetic nanoparticles has gained significant attention. The core concept behind their physics lies in their interaction with biomolecules such as hemoglobin, DNA, and RNA. This study examines the fundamental forces involved in these interactions, including van der Waals attractions, electrostatic repulsion, thermal effects, and magnetic coupling between nanoparticles and biological molecules. To describe these interactions quantitatively, parameters such as zeta potential, magnetic moment density, and …
Published in Research & Reviews : Journal of Physics · Vol. 14, Issue 3, 2025 · pp. 20–32 Read article
-
Sustainable Development of Carbon–Sisal Reinforced Polyester Composites through Green Nanotechnology
Abstract: This study presents the sustainable development of carbon–sisal fiber reinforced polyester composites enhanced through green nanotechnology for improved mechanical performance and environmental compatibility. The hybrid composites were fabricated using varying fiber ratios - C1 (70% carbon, 30% sisal), C2 (60% carbon, 40% sisal), and C3 (50% carbon, 50% sisal) - with an optimized addition of 1 wt.% nano-silica (SiO2) synthesized via a green sol–gel route. The tensile, flexural, and impact …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1179–1194 Read article
-
Biomedical Coatings: Surface Engineering for Enhanced Biocompatibility and Performance
Abstract: Biomedical coatings have become essential in modern healthcare, significantly improving the performance, durability, and biocompatibility of medical implants and devices. These coatings serve multiple functions, including reducing infection risks, enhancing osseointegration, promoting tissue integration, and enabling localized drug delivery. Advances in surface engineering have led to the development of innovative coatings with superior properties such as antimicrobial resistance, bioactivity, and controlled biodegradation. Various materials are employed in biomedical coatings, including …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 1, 2025 · pp. 8–15 Read article
-
Anti-Soiling Coating Technologies for PV Panels Under Dust Storm Conditions
Abstract: Background Deployment of photovoltaics (PV) in arid and semi-arid areas where there is ample sunlight has been increasing quickly because of their great solar irradiation. The rising number of dust storms, as well as depositing particulate matter to the air, have caused a significant decrease in energy production due to reduced transmittance of light through the surface of the PV panel from the dust on the panel’s surface. This has …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 13, Issue 2, 2026 · pp. 26–36 Read article
-
Carboxymethyl Cellulose-Based Spray-Dried Microspheres: Recent Advances and Applications in Targeted Drug Delivery Systems
Abstract: Microspheres are spherical particles ranging from 1 to 1000 μm, made from natural or synthetic polymers and inorganic materials. Their structure allows precise drug delivery, improving targeted release and minimizing off-target effects. Natural polymers such as starch, chitosan, and alginate are favored for their biodegradability, adhesion, and compatibility, enhancing mucosal interaction and residence time. Microspheres are widely used in site-specific drug delivery, gene therapy, and vaccine administration, improving immunogenicity, extending …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 251–268 Read article
-
Study of Electrochemical and Mechanical Properties of Graphene/HAp Composite Coating on Ti-13Nb-13Zr Alloy via Electrophoretic Deposition for Biomedical Application
Abstract: Titanium-13niobium-13zirconium alloy has widespread potential in biomedical applications due to its high degree of biocompatibility, favourable mechanical properties, high corrosion resistance, and high possibility of osseointegration. The surface was improved by electrophoretic deposition method using hydroxyapatite and graphene (5 g nanoHAp) (5 g nanoHAp+0.06 nanoGr) and suspended in ethanol solution at different conditions of time (1, 3, and 7 minutes) and voltage (50, 70, and 100 V). The effect of …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 91–106 Read article
-
Recent Developments in Polymer Concrete: Considerations for Materials, Performance, and Sustainability
Abstract: In modern infrastructure Growing need of durability and environmental has driven interest in polymer concrete (PC) as an alternative to conventional cement-based materials. This review critically evaluates recent developments in polymer concrete with emphasis on material innovations, performance characteristics, and sustainability aspects. Demonstration of Advanced polymer binders (e.g. epoxy, polyester and vinyl ester resins) shown significant improvements in mechanical strength, adhesion and chemical resistance. Investigation indicates that use of nanomaterials …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 910–920 Read article
-
Generative Design of Bioactive Orthopedic Composites for Fracture Repair Using an Integrated Conditional GAN–Transformer Framework: A Multi-Objective Approach
Abstract: Orthopedic composite implants for fracture repair must simultaneously satisfy conflicting mechanical and biological demands: high fracture toughness, sufficient compressive stiffness, and bioactive surface chemistry enabling osteoblast adhesion and mineralization. Existing design approaches rely on trial-and-error experimentation, yielding sub-optimal trade-offs between these objectives. This paper presents an integrated conditional Generative Adversarial Network–Transformer (cGAN-T) framework for fully computational, multi-objective generative design of hydroxyapatite (HA)-reinforced polymer composite microstructures targeting Orthopedic fracture repair. A …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 21–35 Read article
-
Considerations on Fractured Edge Dislocations of Mechanical Tested Hand Laid Hemp Flax GFRP Hybrid Polymer Composites with SEM Verifications
Abstract: In this research study, three types of composite samples are made. Hemp-Glass Fiber (C1), Flax- Glass Fiber (C2), and Hemp-Flax-Glass Fiber Hybrid Composite (C3). For proper fibre-to-fiber adhesion and bonding, a 10:1 mixture of glue (LY556) and brace (HY951) was used. Tensile, flexural, impact, double shear, and hardness research is conducted among all the specimen samples. According to ASTM standards, the comparison is made among C1, C2 and C2 respectively; …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 1–19 Read article
-
Plant Bioactive Metabolites and Their Role in the Prevention and Control of Dental Diseases and Infections.
Abstract: The oral diseases, including dental caries and periodontitis, affect masses worldwide, and have historically been managed with synthetic antimicrobials that cause deleterious side effects, leading to mounting bacterial resistance. Consequently, contemporary dentistry is rapidly shifting toward phytomedicine using plant bioactive molecules, such as polyphenols, terpenes, anthraquinones (berberin, eugenol, curcumin, catechins, allicin, and azadirachtin. These compounds offer potent antimicrobial, anti-inflammatory, and tissue-regenerative properties that are crucial for preventing and curing dental …
Published in Emerging Trends in Metabolites · Vol. 3, Issue 1, 2026 · pp. 47–66 Read article
-
A Critical Analysis of Cold Spray Coatings and its Tribological Performances
Abstract: Coatings are utilized for temperature barrier, protection against corrosion and wear etc. Cold spray is a solid-state processing method that is unique among thermal deposition procedures since it deposits particles at temperatures below their melting point. This technology does not involve particle melting, hence retaining the original properties of the materials. Increased coating strength is achieved by retaining of feedstock powder microstructures and characteristics, which prevents oxide formation and other …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 220–226 Read article
-
Composite Behavior of Bagasse Ash Stabilized Expansive Soil with Sodium Benzophenone Under Curing Conditions
Abstract: The present investigation examines the development of a hybrid composite using Black Cotton (BC) soil, Bagasse Ash (BA), and Sodium Benzophenone (SBP) as performance-enhancing elements. Different ratios of BA, a silica-rich agro-industrial by-product, were added to improve pozzolanic reactivity and particle size distribution (0%, 6%, and 12%). SBP was added in the range of 0–0.6% as a compatibilizer in order to enhance interfacial adhesion, particle cohesivity and moisture-assisted deterioration resistance. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1134–1146 Read article
-
Gelatin-EiO2 (Ei = Si/Ti/Zr) Based Mesoporous Nano-hybrids: Synthesis and Characterization
Abstract: The hybrid materials are mostly prepared by combining the organic or bio-organic part to the inorganic building blocks and are used in many applications. Gelatin as one of the main component of hybrid materials is an attractive option. It is biodegradable; biocompatible; non-toxic; bio-adhesive and contains many active groups such as –NH2, –COOH, in the biopolymer backbone makes these hybrid materials important in various technological applications. The synthesis of a …
Published in Journal of Materials & Metallurgical Engineering · Vol. 14, Issue 3, 2024 · pp. 30–58 Read article
-
Comprehensive Experimental Analysis of the Mechanical Properties and Enhancements of Natural Fiber Composites
Abstract: This research investigates the mechanical characteristics of bio-composites reinforced using jute and sisal fibers. Natural fibers have emerged as promising alternatives because of their low density, renewability, biodegradability and approving mechanical properties. The research involved fabricating bio-composite plates using the hand lay-up method with varying orientations of jute and sisal fibers. The mechanical parameters, including tensile strength, impact strength, and flexural strength, were rigorously assessed and compared across various fiber …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 45–53 Read article
-
Investigation on Mechanical Properties of Bamboo Fibre Reinforced Composites
Abstract: This study investigates the mechanical performance of bamboo fibre-reinforced polymer composites (BFRPCs), emphasizing tensile, flexural, and impact properties. The composites were fabricated using an epoxy resin matrix combined with untreated bamboo fibres in varying fibre contents ranging from 25% to 45%, utilizing the hand lay-up method. Among the tested compositions, the composite with 35% bamboo fibre content exhibited the most favorable mechanical characteristics. It achieved the highest tensile strength of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 325–338 Read article