Search
195 articles for “Surface conditions”
-
Activated Carbon Materials as Ideal Adsorbents for the Desulfurization of Fossil Fuels
Abstract: Removal of organosulfur compounds from diesel is of interest from scientific, social, economic, and environmental viewpoints. Production of clean fuel remains a primary goal of the petroleum refining industry. The reduction of sulfur content below stringent ppm levels in diesel fuels becomesincreasingly challenging due to the presence of sterically hindered sulfur compounds, such as 4,6- dialkyldibenzothiophenes, which are resistant to removal over conventional supported mixed sulfide hydrodesulfurization catalysts. Consequently, alternative …
Published in International Journal of Pollution: Prevention & Control · Vol. 4, Issue 1, 2026 · pp. 28–34 Read article
-
AI-Assisted Defect Detection in Polymer Composite Insulators Using an Optimised Ensemble Deep Learning Framework for Structural Health Monitoring
Abstract: Polymer composite insulators, particularly those made from silicone rubber and epoxy resins, are increasingly adopted in high-voltage transmission systems due to their superior electrical insulation, lightweight design, hydrophobicity, and environmental durability. Despite their advantages, these materials are susceptible to surface degradation, mechanical cracking, and flashover under prolonged exposure to environmental pollutants, thermal stress, and electrical aging. Accurate, real-time condition assessment of these composite insulators is critical for ensuring operational safety, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 253–261 Read article
-
Experimental and Numerical Investigation of Corrosion-Induced Failures in Copper-Tin Alloy (Cu-Sn) and Aluminum-Magnesium Alloy (Al-Mg) Connectors: A Stress–Corrosion Coupling Analysis
Abstract: The utilization of an integrated experimental and finite element modelling (FEM) methodology, this study investigates the degradation and failure mechanisms in polymer composite electrical connectors exposed to aggressive environmental conditions. Epoxy- and polyamide-based composites, reinforced with carbon and glass fibers, were subjected to accelerated salt spray and humidity–temperature cycles to simulate prolonged outdoor exposure. Electrochemical and environmental aging experiments revealed that chloride ions and moisture ingress were responsible for matrix …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 366–379 Read article
-
Investigating the Influence of Process Parameters on Photochemical Machining of Phosphor Bronze Alloy Microchannels
Abstract: Microchannels are widely employed in microfluidic devices, biomedical systems, and compact heat exchangers, where their functional efficiency depends strongly on surface finish, dimensional control, and edge quality. Traditional machining techniques often face limitations in producing such features with the required precision, prompting the use of advanced micromachining methods. In the present work, photochemical machining (PCM) has been applied to fabricate serpentine-shaped microchannels in phosphor bronze. The study systematically investigates the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 837–846 Read article
-
Impact of Urbanization on Biodiversity Hotspot: A Case of Bhubaneswar City
Abstract: Urbanization has contributed to pollution and generation of waste heat leading to changes in the urban heat balance thereby influencing its microclimate. Urban regions confront heightened heat wave conditions due to urban heat island (UHI) impact, which is a result of anthropogenic effects on both surface and atmospheric temperature patterns relative to the natural environment. The investigation was carried out in a 20-km radius around the city of Bhubaneswar. The …
Published in Journal of Remote Sensing & GIS · Vol. 15, Issue 3, 2024 · pp. 20–28 Read article
-
Enhancing Surface Roughness in the Taguchi Method for Turning Alloy Steel in Wet and Dry Environments
Abstract: The present investigation focuses on evaluating the performance of turning operations in alloy steel with particular emphasis on the effect of cutting parameters on surface roughness. In the machining of alloy steel, tool life and surface integrity are significantly influenced by parameters such as spindle speed, depth of cut, and feed rate. Among these, feed rate has been observed to exert the most prominent effect on surface roughness. To systematically …
Published in International Journal of Robotics and Automation in Mechanics · Vol. 3, Issue 2, 2025 · pp. 1–6 Read article
-
Enhancing Road Safety: A Robotic System for Automatic Pothole Identification and Filling
Abstract: Innovative technologies called automatic pothole detection systems are made to automatically locate and identify potholes on road surfaces. These systems incorporate many components, including sensors such as cameras, LiDAR, and accelerometers, to acquire data on the road conditions. Potholes on roads provide serious risks to passing cars and pedestrians, which can result in collisions, damage to cars, and deterioration of the infrastructure. Automatic pothole detection systems, which make use of …
Published in Journal of Instrumentation Technology & Innovations · Vol. 14, Issue 3, 2024 · pp. 1–6 Read article
-
Role of Polymer and Composite Materials in Enhancing Durability and Comfort of Urban Park Furniture for Senior Citizens
Abstract: Parks in urban areas are crucial in facilitating physical activities, socialization, and or mental health to the elderly citizens. Nonetheless, the traditional materials in outdoor park furniture may suffer in the form of low durability, weathering, ergonomics and maintenance, among other aspects and restrict long term applications of such furniture by the elderly population. The research question examined in the proposed study is: How can polymer-based and composite materials improve …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 297–311 Read article
-
Integrating Atmospheric Science: Understanding Greenhouse Gases, Aerosols, and Air Quality Dynamics
Abstract: Atmospheric science investigates the Earth’s atmospheric systems to understand their composition, dynamics, and the implications for climate, weather, and air quality. This review explores five primary areas within the field: atmospheric composition, atmospheric modeling, remote sensing, air pollution, and boundary layer dynamics, highlighting critical challenges and advancements. Rising levels of greenhouse gases (GHGs), including carbon dioxide and methane, continue to drive global warming, while feedback mechanisms—like cloud interactions and surface …
Published in International Journal of Atmosphere · Vol. 1, Issue 1, 2024 · pp. 32–35 Read article
-
Optimization of Turning Process Parameters by Genetic Algorithm Approach
Abstract: In this research, turning parameters were optimized through a genetic algorithm for the purpose to minimize surface roughness and to maximize the material removal rate. High finish quality is guaranteed through minimum surface roughness, and efficient process planning is facilitated through maximum material removal rate optimization. For predicting surface roughness and material removal rate with respect to spindle speed, feed rate, and depth of cut, the empirical models were developed …
Published in Journal of Production Research & Management · Vol. 15, Issue 1, 2025 · pp. 33–41 Read article
-
Effect of Surface Modification on Properties of Kevlar/Epoxy Polymer Composites
Abstract: In this study, a high-performance Kevlar/epoxy polymer composite was prepared using a hand lay-up technique. The Kevlar fiber was treated with calcium chloride/ethanol solution (CaCl2/EtOH) to enhance the interfacial interaction between the fiber and the epoxy matrix. The optimization of fiber surface treatment and fiber content for the best tensile strength (TS) of Kevlar/epoxy polymer composite was achieved using Box-Behnken design (BBD) through response surface methodology (RSM). Three parameters: CaCl2 …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 35–46 Read article
-
Structural Health Monitoring of Polypropylene Fiber- Reinforced Composite Using Accelerometer Sensors
Abstract: This study explores the application of accelerometer sensors for structural health monitoring (SHM) in evaluating the performance of polypropylene fiber-reinforced composites (PFRC). Incorporating polypropylene fibers into concrete enhances its structural integrity and durability. However, accurately assessing PFRC behavior under various conditions is crucial for its practical application in construction. This research employs advanced accelerometer sensor technology for real-time monitoring and assessment of PFRC performance. Experimental investigations captured and analyzed the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 621–634 Read article
-
Electrochemical Evaluation of Corrosion Behavior in Industrial Alloys Under Acidic and Marine Conditions
Abstract: Corrosion represents a spontaneous physicochemical transformation in which metals revert to their more stable thermodynamic state, typically oxides, hydroxides, or sulfides, as a result of interaction with environmental elements. Rather than being a simple surface reaction, corrosion is a complex electrochemical phenomenon that significantly influences the durability, reliability, and performance of metallic structures across industrial, marine, and domestic sectors. The consequences extend beyond material degradation, contributing to substantial economic losses, …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 13, Issue 1, 2026 · pp. 24–36 Read article
-
Effect of Welding Factors on Nugget Size of Polymer-Metal Composite Sheets Using Computational Methods
Abstract: Resistance spot welding (RSW) is a vital technique for joining materials in industries like automotive and aerospace. This study extends the application of RSW to polymer-metal composite sheets by developing 2D axisymmetric, thermo-electro-mechanical coupled model in ANSYS. The focus is on analyzing the temperature distribution, nugget formation, and parameter optimization in hybrid composite sheets, emphasizing the unique challenges posed by polymers' thermal and electrical properties. These properties differ significantly from …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 612–623 Read article
-
Integrated Remote Sensing Indices for Assessing Pre-Monsoon Water Scarcity Vulnerability in a Semi-Arid Coastal Ecosystem: A Case Study of Barda Wildlife Sanctuary, Gujarat, India
Abstract: Freshwater availability fundamentally shapes the structure and function of dryland ecosystems, where evapotranspiration exceeds precipitation for most of the year. Protected areas in semiarid regions face intensifying hydrological stress from climate variability, growing wildlife populations, and resident human communities, yet systematic spatial assessments of water scarcity remain scarce for many critical habitats. The Barda Wildlife Sanctuary in coastal Gujarat, India, has recently become a secondary home for the endangered Asiatic …
Published in Journal of Remote Sensing & GIS · Vol. 17, Issue 2, 2026 Read article
-
Anti-Soiling Coating Technologies for PV Panels Under Dust Storm Conditions
Abstract: Background Deployment of photovoltaics (PV) in arid and semi-arid areas where there is ample sunlight has been increasing quickly because of their great solar irradiation. The rising number of dust storms, as well as depositing particulate matter to the air, have caused a significant decrease in energy production due to reduced transmittance of light through the surface of the PV panel from the dust on the panel’s surface. This has …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 13, Issue 2, 2026 · pp. 26–36 Read article
-
Nanostructured Catalysts for Sustainable CO2 Reduction: Advancing Green Chemistry and Polymer Composites
Abstract: This study provides a comprehensive analysis of advanced nanostructured catalysts designed to enhance the efficiency of artificial photosynthesis for sustainable fuel production. We systematically evaluated a range of nanomaterials—including metal oxides, plasmonic nanoparticles, and carbon-based composites—to determine their effectiveness in converting solar energy into storable chemical fuels. The catalysts were synthesized via sol-gel, hydrothermal, and green methods, and their properties were thoroughly characterized using XRD, SEM, TEM, UV-Vis spectroscopy, and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 175–181 Read article
-
Performance Evaluation of Eco-friendly Cutting Fluid in Machining Process—An Approach towards Environmentally Friendly Production
Abstract: The machining industry's evolving environmental consciousness has prompted a growing demand for cutting fluids devoid of chlorine and sulphur, thus fostering sustainable machining practices. This surge in demand is driven by mounting apprehensions over environmental contamination and worker safety. As the industry transitions to modern cutting fluids, it becomes imperative to comprehend their effectiveness and the optimal machine parameters required for their deployment in the turning process. In our current …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 149–160 Read article
-
Analyzing Cavitation in Marine Propeller: A Computational Approach with Consideration for Polymer Applications
Abstract: A major source of noise and blade damage in marine propellers is because of the phenomenon of hydrodynamic cavitation. The Computational Fluid Dynamics (CFD) analysis approach is employed for the prediction of the cavitating propeller’s performance characteristics under various conditions of operation with the advance coefficient (J) ranging from 0.55 to 0.91 and cavitation number (σ) in the range of 0.80 to 4.50. The numerical simulation is performed on INSEAN …
Published in Journal of Polymer & Composites · Vol. 12, Issue 8, 2024 · pp. 29–44 Read article
-
Role of Fatigue and Creep in Structural Damage: A Comprehensive Review
Abstract: Fatigue and creep are two critical degradation mechanisms that significantly influence the structural integrity and longevity of engineering materials. These phenomena arise due to different loading and environmental conditions but often coexist in various industrial applications, leading to severe material degradation over time. Fatigue primarily results from cyclic loading, where repeated stress variations induce microstructural damage and crack initiation, ultimately causing catastrophic failure. Conversely, creep occurs under sustained stress at …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 3, Issue 1, 2025 · pp. 22–26 Read article