Search
855 articles for “Pressurizing”
-
The Effects of Hydro Confining Pressure on the Flow Properties of Sandstone and Carbonate Rocks
Abstract: There is a significant effect of the hydro confining pressure of the core holder on the flowing properties of the formation rocks. This effect is caused due to the mechanical elastic deformation of the core when carrying out laboratory studies of the water shutoff and polymer compositions. Consequently, this deformation will cause changing in the permeability and voids storage capacity of the studied core samples. Therefore, under the laboratory conditions …
Published in Journal of Petroleum Engineering & Technology · Vol. 7, Issue 1, 2017 · pp. 44–47 Read article
-
Theoretical and Simulation Studies on Gas Well Performance
Abstract: The productivity of any oil or gas well is governed by its maximum flow potential with the available varying parameters such as draw-down pressure availability, tubing sizes available to lift the fluid, and others. The present study on the performance of a gas well delineates the appropriate parameters that are necessary for maximizing the flow from the reservoir to the wellhead surface by utilizing a performance simulator, with nodal analysis …
Published in Journal of Petroleum Engineering & Technology · Vol. 11, Issue 2, 2021 · pp. 9–24 Read article
-
Comparison of Recording of Blood Pressure by Mercury Sphygmomanometer and Digital Sphygmometer: A Pilot Study
Abstract: Mercury sphygmomanometers are being replaced by other devices due the risk of mercury exposure to individuals as well as the environment. However, the accuracy of blood pressure (BP) recording must be ensured. The devices should be clinically validated before use. Present study was done to compare the recording of BP with mercury and digital sphygmomanometer. A descriptive comparative study design was employed. Fifty hospitalised patients were purposively selected. Patient information …
Published in Journal of Nursing Science & Practice · Vol. 5, Issue 1, 2015 · pp. 34–37 Read article
-
Deformation Behaviour of the Billet and Tooling Design on AA5083 through Equal Channel Angular Pressing With Effect of Back Pressure
Abstract: Equal channel angular pressing is an emerging method applied to subject materials to significant plastic strains while maintaining the original shape of the billet. Researchers have discovered that the level of strain attained through equal channel angular pressing is influenced by factors such as the angle of die, friction conditions, and the implementation of back pressure. These variables significantly impact the microstructure and the irregularity of strain within the billet …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 287–303 Read article
-
Performance Assessment of External Source-Driven Binary Vapor Cycles with Ammonia-Water and Trans-critical CO2: The Impact of Reheating and Pressure Variations
Abstract: This paper investigates the thermodynamic performance of binary vapor cycles, focusing on two working fluid combinations—ammonia-water mixtures and trans-critical carbon dioxide (CO2). The analysis evaluates how system performance is influenced by incorporating reheating processes and varying operating pressures, which are key parameters in optimizing cycle efficiency and energy recovery. By leveraging external heat sources and exploring these configurations, the research aims to provide insights into improving the efficiency of industrial …
Published in Journal of Thermal Engineering and Applications · Vol. 12, Issue 1, 2025 · pp. 23–29 Read article
-
Failure Analysis of Hybrid Natural/Synthetic Fiber Composite Laminates in The Application of Hybrid Composite Pressure Vessel
Abstract: Composite laminates are frequently utilized in multiple sectors. The growing complexity of composites in aircraft applications necessitates hybridization of these materials. These hybrid laminates consist the combination of one natural fiber and two selected synthetic fibers. This work investigates three different six-layer hybrid composite laminate combinations: Jute2/Carbon2/Jute2, Jute2/Glass2/Jute2, and Carbon2/Glass2/Carbon2, with helix angles of 0° and 90° and a volume fraction of 50% fiber content. Each specimen is fabricated utilizing …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 85–98 Read article
-
Exploring the Dynamics of Eye Fluid: Lymphatics, Aqueous Humor, and Intraocular Pressure
Abstract: Lymphatic vessels are essential for regulating interstitial fluid balance, facilitating immune cell transport, supporting lipid absorption, and playing significant roles in tumor development and metastasis. Recent findings have expanded their recognized functions, particularly in pathological contexts. One notable discovery is the involvement of lymphatics in draining aqueous humor from the eye, a process closely linked to the regulation of intraocular pressure (IOP) and its implications for glaucoma progression. This review …
Published in Emerging Trends in Personalized Medicines · Vol. 2, Issue 2, 2025 · pp. 31–44 Read article
-
Performance Assessment of External Source-Driven Binary Vapor Cycles with Ammonia-Water and Trans-Critical CO2: The Impact of Reheating and Pressure Variations
Abstract: This study examines the thermodynamic performance of binary vapor cycles, specifically analysing two working fluid combinations: ammonia-water mixtures and trans-critical carbon dioxide (CO2). The study aims to evaluate their efficiency, applicability, and potential for improving energy conversion systems in various thermal applications. The analysis investigates how incorporating reheating processes and adjusting operating pressures impact system performance. These two parameters play a critical role in enhancing cycle efficiency and maximizing energy …
Published in Journal of Thermal Engineering and Applications · Vol. 12, Issue 2, 2025 · pp. 42–49 Read article
-
Variation in Ozone at Night in Barrow, Alaska, during Different seasons, and its Relationship to Methane at Different Pressures
Abstract: The study is focus on the investigation of the night-time seasonal variability of ozone (O₃) at Barrow, Alaska, and also it examines its association with methane (CH₄) concentrations at different pressure levels along with solar flux variations on the basis of eighteen years (2003–2020) of observational data, including ground-based ozone measurements, satellite-derived methane data at 100, 200, 300, 400, and 500 hPa, and solar flux (F10.7) values. For finding the …
Published in International Journal of Atmosphere · Vol. 3, Issue 1, 2026 · pp. 44–53 Read article
-
Managed Pressure Drilling for Improved Well Control: A Cross-Case Comparative Study (2015–2025)
Abstract: Managed Pressure Drilling (MPD) has matured over the past decade from a specialist technique applied to challenging wells into a mainstream drilling capability spanning ultra-HPHT exploration, deepwater development, unconventional tight-gas multi-well campaigns, and naturally fractured sour-gas reservoirs. Despite this maturation, the operational question of which MPD variant should be applied to a given well has been addressed in the literature case-by-case rather than through structured comparative synthesis. This paper presents …
Published in Journal of Petroleum Engineering & Technology · Vol. 16, Issue 2, 2026 · pp. 07–12 Read article
-
Experimental Investigations of Mass Flow Rate on Regression Rate of Hybrid Rocket
Abstract: A number of practical hybrid propulsion systems developed for booster and upper stage application,at different Centers across the globe. The regression rate of hybrid fuel plays an important role ondevelopment of viable hybrid propulsion system. In the present investigation an effort has been madeto study the regression rate behavior of PVC-DBP((C 2 H 3 Cl) n )-DBP(C 16 H 22 O 4 ) hybrid fuel burning inthe stream of gaseous …
Published in Journal of Experimental & Applied Mechanics · Vol. 12, Issue 2, 2021 · pp. 31–51 Read article
-
ENHANCED TECHNIQUE FOR HYDRAULIC FRACTURING PROCEDURE IN FRACTURED ROCK MASS
Abstract: Notwithstanding the broad hypothetical work about hydraulic fracturing technique for estimation of stresses in rock mass, the experimental work has so far been restricted, particularly on account of its legitimacy in fractured rocks. Much work has been completed about the induced fractures created by hydraulic fracturing tests, however not on the impact of previously existing fractures and joints and their impact. When a fracture has been originated at the borehole …
Published in Journal of Geotechnical Engineering · Vol. 9, Issue 1, 2022 · pp. 39–44 Read article
-
Industrial Tank Pressure, Temperature and Humidity Controller using Microcontroller
Abstract: In this paper, a computer based pressure, temperature and humidity viewing and controller using microcontroller has been discussed. The article achievement is an authoritative part in manufacturing in instruction to protect the excellence of amenity. Hotness sensor measures the hotness, humidity and compression sensors measure moisture and weight respectively and corresponding similarity indication, which is additionally treated by the microcontroller. The statistics will be showed on the liquid crystal display …
Published in Journal of Microcontroller Engineering and Applications · Vol. 3, Issue 3, 2016 · pp. 24–27 Read article
-
Comparison of PQR and WPQ for Jacket Long Seam Joint of Pressure Vessel as per ASME Section IX
Abstract: Small and medium size stocked components intended for boiler and pressure vessel are often manufactured and welded with reference to ASME section III and IX. This paper mainly focuses on rules for welding qualification, monitoring welding activities during manufacturing and the extent of supervision by independent inspection body required by the quality system. In this work comparison required for welder procedure qualification as well as welder qualification accordance with procedure …
Published in Journal of Materials & Metallurgical Engineering · Vol. 6, Issue 2, 2016 · pp. 1–5 Read article
-
Performance Evaluation of Vegetable Oil Based Cutting Fluids with Extreme Pressure Additive in Turning of AISI 1040 Steel
Abstract: Vegetable oils are being investigated as a potential source of environmental favorable lubricants, due to high biodegradability, renewability and good lubrication properties. The objective of this work is to determine the influence of vegetable oil based cutting fluids (sesame and coconut oil) with extreme pressure (EP) additive on machining performance in terms of cutting forces, cutting tool temperature, tool flank wear and surface roughness during turning of AISI 1040 steel …
Published in Journal of Production Research & Management · Vol. 4, Issue 3, 2014 · pp. 8–14 Read article
-
Numerical modeling of Nocardia Migration Influenced Transport pressured by Dispersion and velocity in Fine Sand Formation in Wetland Environment
Abstract: AbstractThis paper monitor the behaviour of Nocardia in fine sand deposition, the study express the velocity and dispersion influences on Nocardia migration in wet land environment. The transport process at different litho structure observed variation on their concentration in the study area, this condition developed fluctuation on the transport system within the predominant strata, the concentration from three to thirty metres developed fluctuation base on the influences from dispersion and …
Published in Journal of Water Resource Engineering and Management · Vol. 5, Issue 1, 2018 · pp. 6–13 Read article
-
Modified Delphi Technique: Content validity of the Pressure ulcer risk assessment tool
Abstract: A study was undertaken to develop the risk assessment tool for prediction of pressure ulcer. Content validity of the tool was done through modified Delphi technique. The Delphi is an interactive process designed to combine expert’s opinion into group consensus. Panel of experts was selected and three rounds of Delphi were completed for content validation. The I-CVI was ranged from 0.86 to 1. The content validity index of risk assessment …
Published in Journal of Nursing Science & Practice · Vol. 7, Issue 3, 2017 · pp. 17–19 Read article
-
Yoga: A Cost Effective Lifestyle Method to Control Blood Pressure
Abstract: Hypertension has become a major health concern as it is the predominant risk factor and treated for stroke, coronary heart disease (CHD), heart failure, arterial aneurysms and renal failure. As drug therapy alone is a costly affair for a developing country like India, a need for less experience, nonpharmacological alternative methods should also be taken into consideration. Medication and yoga are some alternative Indian techniques’ which can be used in …
Published in Research and Reviews: A Journal of Health Professions · Vol. 6, Issue 2, 2016 · pp. 31–32 Read article
-
Qualitative and Quantitative Effects of Non-Thermal Atmospheric Pressure Plasma and ErCr: YSGG Laser Activation on Surface Remineralization and Fluoride Release of Three Different Fluoride Varnishes
Abstract: Dental caries remains a prevalent oral health concern worldwide, prompting ongoing research into innovative approaches for caries prevention and management. This experimental investigation endeavors to conduct a comparative assessment of the bioactivity, fluoride release kinetics, shear bond strength, and compressive strength of glass ionomer cement (GIC) augmented with three distinct types of inorganic bioactive nanoparticles. Bioactive nanoparticles have garnered interest in dental materials for their potential to enhance material properties …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 292–303 Read article
-
Experimental Analysis of Axially Compressed Precast Concrete Pressure Pipes Filled with Concrete
Abstract: Humanity has always been at the mercy of natural disasters, which frequently result in widespread devastation and displacement. However, scientific advancements, technological innovations, and extensive research have significantly mitigated the loss of life, property, and essential resources. One of the critical challenges in the aftermath of disasters is providing adequate and timely shelter, food, and medicine to the affected populations, often under constrained resources and logistical difficulties. In response to …
Published in Recent Trends in Civil Engineering & Technology · Vol. 15, Issue 1, 2025 · pp. 28–37 Read article