Search
133 articles for “Nano-crystal”
-
Performance Improvement of Nano Field Effect Transistor Based on Zinc Oxide Semiconducting Materials – a Critical Analysis
Abstract: New semiconductor materials and new shapes for contemporary nanostructured semiconductor devices, like nanowires, have been researched as a result of advancements in transistor technology. Because of their unique electrical, photonic, and sensing capabilities, nanowires (NWs) constructed of various semiconductor material systems (gallium arsenide, zinc oxide, etc.) have been the subject of intense research over the past 20 years. Due to its distinctive properties, including high electron mobility, high crystalline quality, …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 99–107 Read article
-
Synthesis of PANI/RGO/NiCrO Nanocomposite Material for Charge Storage Application
Abstract: PANI/RGO/NiCrO nanocomposite is synthesized by chemical oxidative polymerization of aniline and Nickel-Chromium Oxide (NiCrO). The prepared PANI/RGO/NiCrO nanocomposite exhibited high specific capacitance of 800 F/g at the scan rate of 5 mV/s, high power density of 1399.44 Wkg-1 and high energy density of 70 Whkg-1. The as-prepared polymer nanocomposites were characterized by X-ray diffraction (XRD) to study crystallinity, Fourier transform infrared spectroscopy (FTIR) to know the functional groups, Transmission electron …
Published in Journal of Polymer & Composites · Vol. 10, Issue 1, 2022 · pp. 89–99 Read article
-
Polymer Electrolyte Films Doped with Nanofillers ZnO: Electrochemical and Optical Investigations
Abstract: The electrochemical and optical characteristics of polymer composite electrolyte films doped with zinc oxide (ZnO) nanofillers are thoroughly examined in this work. Because of its superior film-forming capacity, flexibility, and ionic transport properties, poly(vinyl alcohol) (PVA) mixed with potassium iodide (KI) is used as the host polymer electrolyte. To investigate their effects on ionic conductivity, dielectric behavior, and optical transmission, ZnO nanoparticles are synthesized and added to the PVA–KI matrix …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 320–332 Read article
-
Impact of Sol–Gel Processing on Dielectric and Energy Storage Properties of BaTiO3 Nanoceramics
Abstract: Barium titanate (BaTiO3) is a widely studied ferroelectric material because of its high dielectric permittivity and strong potential for electrostatic energy storage applications. In this study, BaTiO3 nanoceramics were synthesized using a controlled sol–gel processing route to investigate the influence of synthesis conditions on their dielectric relaxation and energy storage performance. The synthesized powders were calcined and subsequently sintered at temperatures ranging from 1100°C to 1300°C. Structural analysis using X-ray …
Published in Research & Reviews : Journal of Physics · Vol. 15, Issue 2, 2026 · pp. 11–25 Read article
-
Comparative study of the Antibacterial Properties of Modified Textile Materials with Different Metal Nanoparticles
Abstract: A number of metal particles have proven antibacterial properties. In this study, a comparative analysis was made of two types of metal particles: zinc oxide and titanium oxide nanoparticles respectively, which were deposited on cellulose material and were fixed by means of a cross-linked gelatin hydrogel. Three methods were applied under different reaction conditions for obtaining the biocomposite materials. The biomaterials were investigated by means of scanning electron microscopy, transmittance …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 92–101 Read article
-
Preparation and Characterization of TiO2 Nanoparticles by Green Method
Abstract: In this study, we attempted to synthesize TiO2 nanoparticles utilizing titanium tetrachloride as a precursor and an aqueous extract of Sansevieria plant leaves. Atomic force microscopy (AFM), X-ray diffraction (XRD) pattern, scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, and Brunauer-Emmett-Teller (BET) analysis were used to identify the synthesized TiO2 nanoparticles As per the surface topography, the average diameter of nanoparticles is considered as 67.73 nm. Debye-Scherrer equation was …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 61–67 Read article
-
Synthesis of Graphene-CeO2 Nanocomposite with Enhanced Electrochemical Properties
Abstract: For the fabrication of graphene–cerium oxide (CeO₂G) composites, 99 mg of cerium oxide (CeO₂, 99.9%) was uniformly dispersed in 100 mL of deionized water via ultra-sonication (40 kHz) to achieve a stable suspension, followed by the incorporation of 1 mg of synthesized graphene. The resulting mixture was maintained at ambient temperature (25 ± 2 °C) under continuous magnetic stirring at 500 rpm for 2 h to promote effective interfacial interaction …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1355–1373 Read article
-
Preparation and Characterization of PVA-MgO Nanocomposite Films
Abstract: In this work, Magnesium Oxide Nanoparticles (MgO NPs) doped with 3 g of polyvinyl alcohol (PVA) at different weight percentages (0, 2, 4, 6, and 8 wt.%) using the solvent casting method, to fabricate thin PVA-MgO nanocomposite (NC) films. These films were characterized by (i) XRD, SEM, EDX, DLS, and Zeta Potential for morphological studies, (ii) FTIR spectra and UV-Visible techniques for spectroscopic studies and (iii) DSC for thermal studies. …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 27, Issue 2, 2025 · pp. 40–62 Read article
-
High-Performance Polymer Composite Membranes for Selective Ion Transport in Advanced Energy Conversion Systems
Abstract: The development of high-performance Polymer Composite Membranes (PCM) with enhanced ion transport is essential for Polymer Electrolyte Membrane Fuel Cells (PEMFC). However, low-humidity conditions and filter agglomeration still limit long-term membrane stability. This research designs a functionalized PCM integrating cross-linked Poly (Vinyl Alcohol)/Poly (Ethylene Glycol) (PVA/PEG) matrix with sulfonic acid functional groups and Titanium Dioxide (TiO₂) nanofillers to improve selective ion transport under low-humidity conditions. Two types of PCM were …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 724–736 Read article
-
Synthesis of Silver Nanoparticles of Cissus Quandrangularis and It’s Virtual Screening Against Gastric Cancer
Abstract: Gastric cancer, also known as stomach cancer, is the third leading cause of cancer-related deaths globally and remains a major health challenge due to its poor prognosis and high mortality, largely attributed to late-stage diagnosis. In this context, plant-based nanomaterials are gaining momentum for targeted therapeutic applications. Cissus quadrangularis, a medicinal plant native to India from the Vitaceae family, is traditionally used for its diverse healing properties. Its stem, in …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1551–1569 Read article
-
Experimental Investigation for Strengthening the Nanocomposite Cementitious Materials with a Nanoscale Modification
Abstract: For the last few decades, researchers have widely used nanopolymer to control the mechanical properties of cementitious materials as a micro reinforcement. This paper examines and compares the mechanical and microstructure property of nanofiber cementitious material. Twenty-four sets of beam/cube cast with carbon nanofibers (CNFs) cementitious material where CNFs were used from 0.1%, 0.2%, and 0.3% of cement weight. The nanoparticles were scattered using a surfactant and an ultrasonic probe …
Published in Recent Trends in Civil Engineering & Technology · Vol. 12, Issue 2, 2022 · pp. 10–24 Read article
-
Infrared Spectroscopic Studies on Multiwalled Carbon Nanotubes Reinforced Acrylonitrile Butadiene Styrene Composites
Abstract: AbstractFourier Transformed Infrared (FT-IR) Spectroscopic analysis is an effective technique to captures the response of the molecular motions such as stretching, bending and torsional vibrations of materials. In this study, FTIR analysis has been done on two different grades of multiwalled carbon nanotubes (MWCNT) C100 and NC7000. NC7000 grade MWCNT has a higher degree of crystalinity and shows 60% higher absorbance in the wavelength range of 600-3600 cm-1. These two …
Published in Journal of Polymer & Composites · Vol. 2, Issue 3, 2023 · pp. 15–22 Read article
-
Exposure of Nanoparticle Leads to Health Hazards
Abstract: Nanotechnology is a technique used for the production of materials of the nanoscale level. This is a new development in technology which usually entails some hazards as well as advantage to society. Thus nanomaterials are well known for their various beneficial uses in the medicines, engineering, computer, etc., in spite of that it is associated with many hazards related to human health. The exposure of nanomaterials through dermal contact, inhalation, …
Published in Research and Reviews: A Journal of Toxicology · Vol. 9, Issue 3, 2019 · pp. 7–18 Read article
-
Enhancement of Dielectric Properties of PVDF Composites with MWCNT and GCNF Fillers
Abstract: The paper discusses the role of multiwalled carbon nanotube (MWCNT) and graphitized carbon nanofibre (GCNF) in Polyvinylidene fluoride (PVDF) composites prepared by melt mixing method. Analytical studies were carried out using X-ray diffraction analysis (XRD) and Fourier transform infrared spectroscopy (FTIR) for understanding the role of fillers. Formation of β phase crystalline structure with a relative increase in β phase content is observed and is maximum at 5 wt.% of …
Published in Journal of Polymer & Composites · Vol. 8, Issue 3, 2020 · pp. 43–52 Read article
-
Characterization Techniques for Thin Film Coatings Based on SiO₂, TiO₂, and ZrO₂
Abstract: Thin film coatings made from silicon dioxide (SiO₂), titanium dioxide (TiO₂) and zirconium dioxide (ZrO₂) have attracted great interest owing to their excellent optical, electrical, mechanical and chemical properties. These oxide thin films are widely used in microelectronics, solar cells, sensors, biomedical devices, photocatalysis, anti-reflective coatings and protective layers. The structural, morphological, compositional, optical and mechanical properties of these coatings are closely related to their performance and reliability. Therefore, thorough …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 2, 2026 Read article
-
Preparation of Transparent and Thermal Resistant Zirconia Reinforced Epoxy Based Polymer Matrix Composite Coatings
Abstract: This study investigates the thermal stability, structural characteristics, optical transparency, and surface wettability of epoxy-based composite coatings reinforced with 2 wt.% zirconia (ZrO₂) nanoparticles. The composite coatings were synthesized using a dip-coating technique on carbon fiber substrates and subsequently subjected to thermal treatments at 300 °C, 400 °C, and 500 °C. Structural analysis using X-ray diffraction (XRD) confirmed the amorphous nature of the epoxy matrix with no significant crystallization or …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 171–177 Read article
-
Substitution of La3+ in Cu0.5Co0.5 LaxFe2-x O4 (x=0.02, 0.06) spinel ferrites improves the structural and dielectric Properties
Abstract: Nanosized Spinel ferrites with composition Cu0.5Co0.5 LaxFe2-x O4 (x=0.2, 0.6) synthesized by Sol-Gel auto Combustion method. The prepared sample was calcinated at 8000c for 4 hours. The substitution of La3+ effects the structural parameters, which is characterized by X-ray diffraction (XRD). The X-rd analysis shows that the crystallite size is 34.609 nm for 0.02 and 38.994 nm for 0.06 was calculated by using Debye-Scherrer’s formula. dislocation density shows at value …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 3, 2025 · pp. 45–48 Read article
-
Studies in Effect of Methyl Methacrylate to Butylacrylate Ratio on the Properties of TiO2/poly(methyl methacrylate-co-butylacrylate) Core–Shell Composite Nanoparticles Prepared by Microemulsion Polymerization
Abstract: AbstractTitanium dioxide, as a core, was coupled with the poly(methyl methacrylate-co-butyl acrylate) using amino propyltriethoxy silane as a coupling agent. A two-stage semi-continuous microemulsion polymerization method was used for the synthesis of these core–shell nanoparticles. Ratio of methyl methacrylate to butyl acrylate was varied in the shell of the nanoparticles and the prepared core–shell composite nanoparticles were characterized by Fourier transform infrared spectroscopy, X-ray diffractometer, differential scanning calorimetry, scanning electron …
Published in Journal of Polymer & Composites · Vol. 1, Issue 3, 2013 · pp. 32–39 Read article
-
Comparative Study of Structural and Optical Properties of Bismuth Ferrite Nanoparticles for Photovoltaic Applications Synthesized via Different Sol-Gel Methods
Abstract: Pure multiferroic bismuth ferrite (BiFeO3) nanoparticles were successfully synthesized using an energy-efficient, low-temperature sol-gel method, comparing two distinct approaches: auto-combustion and non-auto-combustion. To ensure phase stability, the precursor solution's pH was strictly maintained between 1 and 2 using ammonia solution (NH4OH), while ethylene glycol (C2H6O2) was employed as a chelating agent for the Fe3+ and Bi3+ cations. All samples underwent a final annealing process at 500 °C to promote crystallization. …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 1, 2026 · pp. 83–94 Read article
-
Combustion Synthesis and Comprehensive Characterization of Pure and Ni-Doped CuFe₂O₄ Nanoparticles for Functional Composite Applications
Abstract: The CuFe2-xNixO4 (x = 0, 0.1, 0.3, and 0.5) nanoparticles were synthesized using a combustion method and comprehensively characterized to understand their suitability for polymer-based composite applications. X-ray diffraction confirmed the formation of a single-phase spinel ferrite structure with crystallite sizes of 20–30 nm. Energy-dispersive X-ray spectroscopy verified the successful incorporation of Ni ions into the CuFe₂O₄ lattice, while FE-SEM analysis revealed uniformly dispersed nanoscale particles desirable for composite reinforcement. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1–11 Read article