Search
308 articles for “Lightweighting”
-
IoT-Enabled Remote Patient Monitoring System Using Wearable Sensors
Abstract: In recent years, the Internet of Things (IoT) has revolutionized healthcare by enabling seamless connectivity between patients, medical devices, and healthcare professionals. The increasing demand for continuous health monitoring and early disease detection has driven the development of IoT-based remote patient monitoring systems. This paper presents an IoT-enabled framework that integrates wearable physiological sensors, wireless communication modules, and cloud- based analytics to facilitate real-time health tracking. The proposed system continuously …
Published in Recent Trends in Electronics Communication Systems · Vol. 13, Issue 1, 2026 Read article
-
Experimental Investigation of Hybrid Natural Fiber Reinforced Epoxy Composites Using Banana and Sugar Palm Fibers
Abstract: This paper is a research study that examines the mechanical and morphological properties of hybrid natural fiber reinforced epoxy composites manufactured from banana fibers (BF) and sugar palm fibers (SPF). Because the use of sustainable, lightweight, and cost effective materials in engineering continues to grow, many engineers are looking at the possibility of utilizing natural fiber reinforced polymer composites as alternatives to traditional man-made fiber composites. Hybrid composite laminate samples …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 195–205 Read article
-
Evaluation of Mechanical Behaviour of Tungsten Carbide and Magnesium Reinforced Aluminium Matrix Composites
Abstract: With industries like automotive and aerospace also being more inclined on the lightweight material and strength that is much substantial, the aluminium-based metal matrix composite has become a major focus of interest. This paper examines the influence of addition of tungsten carbide (WC) and magnesium (Mg) particles on the mechanical characteristics of Al6063 aluminium alloy. The crucible casting technique was made in two composite compositions 2.5 percent and 5 percent …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 1–8 Read article
-
Fabrication and Mechanical Characterization of Hybrid Natural Fiber Reinforced Composites using Ferromagnetic and Graphite Fillers
Abstract: The past few years have seen a lot of interest in the creation of hybrid natural fiber composites because of their lightweight properties, environmental friendliness and their potential use in structures. The hybrid composite laminates in the current study were produced by the hand lay-up process by blending the natural fibers with the functional filler materials. Three types of composite structures were created and these are Natural Composite Material (NCM), …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 498–511 Read article
-
Effect of Barium Sulphate on Mechanical Properties of Woven Aloe Vera/Flax Reinforced Epoxy Composites
Abstract: Natural fiber-reinforced composites are becoming popular because of their lightweight, eco-friendly, and sustainable nature. Nevertheless, single-fiber composites tend to exhibit poor mechanical performance. This research paper has created a hybrid composite bonded with woven Aloe vera and flax reinforced with an epoxy bond. Barium sulphate (BaSO4) filler was added to further improve the properties. The fibers were subjected to sodium hydroxide (NaOH) to enhance bonding with the matrix and the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 355–365 Read article
-
Machine Learning Assisted Design and Analysis of Polymer Composite Materials for Sustainable Renewable Energy Systems
Abstract: Accurate prediction and optimization of polymer composite properties is of paramount importance in the design of these lightweight, durable, and sustainable materials within renewable energy technologies. This work will provide a holistic machine learning-assisted framework that unites materials informatics with domain-specific features and state-of-the-art ML methodologies in the prediction of the mechanical properties of polymer composites, such as tensile strength. This includes embedding several ensemble models, including Random Forest and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 391–402 Read article
-
Critical Review on Multifunctional Polymer Composites for Weight Reduction and AI Based Battery Thermal Management in Electric Vehicles
Abstract: The rapid growth of electric vehicles (EVs) has intensified the need for advanced materials and intelligent control systems capable of improving energy efficiency, driving range, thermal safety, and overall vehicle sustainability. This paper presents a critical review of multifunctional polymer composites and artificial intelligence-based battery thermal management systems (AI-BTMS) for next-generation EV applications. Polymer composites reinforced with carbon fibers, graphene, boron nitride, nanoclays, and carbon nanotubes offer significant advantages over …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 603–619 Read article
-
Synergistic Effects of Hybridized Nano-Silica and Hemp Fiber Reinforcement on Bio-Epoxy Composites
Abstract: Natural fiber-reinforced bio-epoxy composites have become promising sustainable alternatives to conventional synthetic-fiber petroleum-based materials, but are often limited by low fiber-matrix interfacial bonding, low thermal stability, and high moisture absorption which limit their application in structural applications. These issues are discussed in this work, by carrying out a systematic investigation of the synergistic effects of the hybridization of nano-silica particles with alkali-treated hemp fibers in a bio-epoxy matrix the composites …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 214–228 Read article
-
Design and Development of a Low-Cost Quadruped Robot for Educational Robotics Applications
Abstract: The locomotion of the quadruped robots resembles that of four-legged animals and can be used on surfaces that wheeled robots cannot navigate. The paper is a design and development report on a low-cost quadruped robot that has been designed to be used in educational and experimental robotics. The robot is a lightweight and modular robotic system consisting of a combination of mechanical design, embedded control, and wireless communication. The actuation …
Published in International Journal of Manufacturing and Production Engineering · Vol. 4, Issue 1, 2026 · pp. 20–26 Read article
-
IR Laser Virtual Keyword: A Review Paper
Abstract: Technology is evolving at an unprecedented pace, becoming faster, more compact, lightweight, and efficient. Continuous advancements in electronics, communication systems, and embedded technologies have led to the development of innovative devices that enhance convenience and improve user interaction with digital systems. One such innovation is the laser projection keyboard, a virtual input device that eliminates the need for a traditional physical keyboard. By projecting a full-sized keyboard onto any flat …
Published in Journal of Electronic Design Technology · Vol. 17, Issue 2, 2026 Read article
-
Layered Metal–Polymer Hybrid Laminates with Embedded Impact Sensors for Connected Automotive Panels
Abstract: The increasing demand for lightweight, intelligent, and structurally reliable automotive components has accelerated the development of multifunctional hybrid materials capable of simultaneously providing superior mechanical performance and real-time structural health monitoring. In this study, a novel layered metal-polymer hybrid laminate incorporating an embedded flexible impact sensor was developed for connected automotive panel applications. The laminate was fabricated using AA6061-T6 aluminum alloy face sheets and a thermoplastic polyurethane interlayer through hot-press …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Flexural Response and Numerical simulation of Unidirectional Areca–Pineapple Leaf Fiber Hybrid Epoxy Composites
Abstract: The increasing demand for lightweight and environmentally sustainable materials has accelerated the development of natural fiber-reinforced polymer composites for engineering applications. In the present study, unidirectional areca and pineapple leaf fiber (PALF) reinforced hybrid epoxy composites were fabricated using a simple hand lay-up process. Before fabrication, the fibers were chemically treated to improve fiber–matrix adhesion and enhance the mechanical performance of the laminates. Four different stacking sequences (A8, A7P1, A6P2, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Efficient Data Backup and Recovery Automation Using Shell Scripts in UNIX Systems
Abstract: Data backup and recovery constitute essential components of system administration in UNIX-based environments, playing a critical role in maintaining data integrity, ensuring continuous availability, and providing resilience against various forms of data loss. In modern computing systems, data is a vital asset, and its loss—whether due to hardware failures, software corruption, human error, or cyber threats—can lead to significant operational disruptions and financial consequences. Therefore, implementing reliable and efficient backup …
Published in Journal of Advances in Shell Programming · Vol. 13, Issue 1, 2026 · pp. 48–54 Read article
-
Design and Analysis of S-Glass Heat Exchanger
Abstract: This research work focuses on the composite material named S-Glass fibre Heat Exchanger, since the existing designs of heat exchangers are generally made up of metals which produce a critical amount of heat loss to the surrounding from the shell. These are also less corrosive resistant, have low life and high weight. To overcome these drawbacks, use of composite materials has become essential. There is a need to redesign it …
Published in Journal of Thermal Engineering and Applications Read article
-
Design and Performance Assessment of Light Weight Data Security System for Secure Data Transmission in IoT
Abstract: The Internet of Things (IoT) is expected to provide an interface for future technologies’ small processing tools. It is expected to provide more communication data and information security can risky. Data pinnacles and information security can be a risk. This size of the gadget in this engineering is essentially little, low power utilization. Many rounds of encryption are essentially a misuse of requirements Gadget vitality. Less convoluted calculation, be that …
Published in Journal Of Network security Read article
-
Functionally Graded Natural Fibre and SiC-reinforced Polymer Composite: Mechanical Properties
Abstract: Multifunctional materials, also called functionally graded materials (FGMs), are based on natural fibres or fillers and vary in composition and/or microstructure to control functional, structural, or thermal, properties. Functionally graded materials (FGMs) have been created for use in spacecraft, aircraft, and other engineering applications because they can withstand extremely high temperatures. Particle-reinforced FGMs, which make up the majority of FGMs, are made differently depending on their position. The mechanical and …
Published in Journal of Polymer & Composites · Vol. 11, Issue 4, 2023 · pp. 1–14 Read article
-
Investigating the Functionality of Graphene Fiber Reinforced Plastic (GFRP) Laminates
Abstract: The increased adaptability and usefulness of glass-fiber reinforced polymer has led to its widespread adoption. GFRP laminates can be improved by including filler materials to improve their already impressive set of qualities. The demand for the research and development of advanced composites with enhanced properties has never been greater, and this is especially true for composites that are lightweight but have enhanced tensile and flexural qualities. An example of a …
Published in Journal of Polymer & Composites · Vol. 11, Issue 6, 2023 · pp. 1–9 Read article
-
Effect of Graphite and Titanium Dioxide on Mechanical Properties and Wear Behavior of Al based HMMCs
Abstract: Aluminium Metal Matrix Composites (MMC) is beneficial in a diversity of applications of engineering, particularly due to their strength while being lightweight. The intention of this paper is to develop a Hybrid Metal Matrix Composite (HMMC) using base metal aluminium alloy which is reinforced with different wt% of Graphite and Titanium Dioxide and then study the different mechanical properties like microstructure analysis, tensile strength, hardness, and wear behavior of HMMC …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 20–30 Read article
-
Hydrothermal modification of carbon fiber fabrics by ZnO nanorods for mechanical strengthening of CFRP laminates
Abstract: Hexagonal ZnO nanorods were produced on plain woven carbon fiber using a two-step seed-assisted hydrothermal procedure. By varying the process parameters such as molar concentrations, number of seeding cycles, and growth duration at a controlled growth temperature of 90 °C, it is feasible to produce ZnO nanostructures with a range of morphologies, including nanowires, hexagonal nanorods, and nanoflowers. The developed morphologies were examined using field emission scanning electron microscopy and …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 127–139 Read article
-
Optimum Machining Parameters for Al 7075 Hybrid Metal Matrix Composites Using Multi-objective Optimization Technique and the Modified Taguchi Approach
Abstract: Lightweight composite materials with improved mechanical properties are widely used in industries. There is a need to obtain optimum machining parameters of such hybrid composites. This paper uses reliable multi-objective optimization technique and modified Taguchi approach to determine optimal machining parameters such as speed (NS) varying from 1000 rpm to 1500 rpm, feed rate (FR) from 0.10 mm/rev to 0.20 mm/rev, depth-of-cut (DC) varied from 0.5 mm to 1.5 mm …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 269–278 Read article