Search
86 articles for “Acid oil”
-
Potential of Biodiesel Production from Algae
Abstract: It is necessary to achieve targets for biodiesel production from Algae for the climate change mitigation and economic growth. In this content biodiesel as a biofuel is produced from microalgae, offer the greatest opportunities in the society. This paper consists the current status of microalgae use for biodiesel production, effect of parameters on Biodiesel production, process of transesterification including Lipid extraction and the cultivation, harvesting and processing of algae. During …
Published in Journal of Petroleum Engineering & Technology · Vol. 11, Issue 3, 2021 · pp. 49–60 Read article
-
The Physio-chemical Analysis of waste cooking oil and butanol blends with diesel
Abstract: With the growing concerns of environmental condition and energy resources, the alternate fuel like biodiesel is the best promising fuel. In this paper the physico-chemical properties has been determined of two different bio-diesel blends (1)Waste cooking oil(WCO) with diesel (2) butanol with diesel. The waste cooking oils are subjected to a chemical process called transesterification to produce the WCO biodiesel and then blended with diesel. The steps required for production …
Published in Trends in Mechanical Engineering & Technology · Vol. 8, Issue 3, 2018 · pp. 62–66 Read article
-
Production of Biofuel (Biodiesel and Bioethanol):An economical and environmentally feasible way to the society
Abstract: In recent years, bio fuels growers have achieved significant enhancement in crop output and processing efficiencies and today the volume of bio fuels produced in a specific planted area is several times higher than it used to be as latest methodology and technical work to increase production of biofuel. In the sense of methodology, bio fuels are sub-divided into two large categories: substitute for diesel (biodiesel) and substitute for petroleum …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 11, Issue 2, 2021 · pp. 1–10 Read article
-
Polystyrene Plastic Waste into Liquid Fuel Using Silica-Alumina Catalyst, Extracted from Rice Husk
Abstract: Catalytic Pyrolysis of Polystyrene (PS) into fuel like products using silica alumina catalyst that was extracted from rice husk was investigated over temperature range of 430–470°C. The output of catalytic pyrolysis was liquid oil, solid residues (char) and gaseous fraction. The product yields as a function of temperature, time and catalyst amount were studied. High conversion of liquid (48.8%) was achieved at 430 and 450ºC in the presence of 12.5 …
Published in Journal of Petroleum Engineering & Technology · Vol. 10, Issue 3, 2020 · pp. 15–31 Read article
-
Production of liquid fuel from waste plastic using batch catalytic pyrolysis process
Abstract: Waste polystyrene from households and retailing shops are recognized to be the major sources of environmental problem. On the other hand, it represents a source of energy and valuable chemical products. Pyrolysis as a technique of chemical recycling of waste plastic is as an environmentally and economically acceptable option for converting waste plastics into useful resources. In this study, the operating conditions studied were; temperature was varied from 430 to …
Published in Journal of Catalyst & Catalysis · Vol. 6, Issue 2, 2019 · pp. 34–43 Read article
-
Gelatin-EiO2 (Ei = Si/Ti/Zr) Based Mesoporous Nano-hybrids: Synthesis and Characterization
Abstract: The hybrid materials are mostly prepared by combining the organic or bio-organic part to the inorganic building blocks and are used in many applications. Gelatin as one of the main component of hybrid materials is an attractive option. It is biodegradable; biocompatible; non-toxic; bio-adhesive and contains many active groups such as –NH2, –COOH, in the biopolymer backbone makes these hybrid materials important in various technological applications. The synthesis of a …
Published in Journal of Materials & Metallurgical Engineering · Vol. 14, Issue 3, 2024 · pp. 30–58 Read article
-
Formulation and Evaluation of Polyherbal Soap with Antibacterial and Dermatological Benefits: A Polymer Chemistry Approach
Abstract: This study investigates the formulation and evaluation of polyherbal soap composed of extracts from Vitex negundo, Azadirachta indica, and Curcuma longa. These plants possess significant antibacterial, dermatological, and skin-nourishing properties. The soap formulation follows a saponification process using coconut oil and sodium hydroxide as primary reactants, incorporating polymer chemistry principles in soap structuring and stability. Polymers such as polysaccharides and fatty acid chains contribute to the stability, viscosity, and foaming …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 158–164 Read article
-
Impact of Marine Pollution Threats and Conservation of Marine Biodiversity
Abstract: Ocean occupies 71% of earth’s surface and is traditionally divided into four large basins including North and South Atlantic, North and South Pacific, Arctic and Indian oceans. In India we have a vast coastal area of 7516.6 km from Kolkata to Gujarat and also many islands including Andaman and Nicobar and Lakshadweep with vast fin and shellfish biodiversity. Human interference and both natural and artificial factors pose the biggest threat …
Published in International Journal of Marine Life · Vol. 1, Issue 1, 2024 · pp. 20–24 Read article
-
Guanidine as a Starting Material for Preparing a Scale Inhibitor
Abstract: Oilfield scale inhibition, which can obstruct fluid flow in pipelines, valves, and pumps during oil production and processing, is critical for preventing scale formation. Effective scale inhibitors (SIs) minimize downtime and enhance productivity by preventing the build-up of insoluble crystals in water systems. In oil processing, scale formation results from the precipitation of salts due to incompatible aqueous phases, leading to equipment blockage. Phosphonates are highly effective chelating agents for …
Published in Journal of Petroleum Engineering & Technology · Vol. 16, Issue 1, 2026 · pp. 15–28 Read article
-
Bio Solvent EOR: Performance Assessment of Plant Extracts as Asphaltene Inhibitor
Abstract: Changes in pressure and temperature during oil production and transportation most notably during CO2 injection for enhanced recovery could lead to changes in the oil composition and deposition of asphaltene. Deposition of asphaltene near the wellbore region, production tubing and production facilities could cause severe flow assurance problem. Physical removal of asphaltene is costly and in most cases it is not preferred. A more favorable option is to prevent the …
Published in Journal of Petroleum Engineering & Technology · Vol. 5, Issue 1, 2015 · pp. 9–24 Read article
-
Recovery of Liquid Hydrocarbon Fuels from Polypropylene Waste Plastics via Catalytic Pyrolysis
Abstract: Process of pyrolysis is a thermo-chemical method conducted at high temperatures and usually in presence of catalysts. Dissimilar type of natural and synthetic catalysts are used for alteration of organic wastes into cherished fuels. The aim of this work is conversion of waste production of liquid fuel using catalyst that produced from rice husk ash. Waste plastic was pyrolyzed at temperature range 430-470oC and obtained products were liquid fuel, gas …
Published in Journal of Catalyst & Catalysis · Vol. 7, Issue 1, 2020 · pp. 33–48 Read article
-
Investigation on the Characteristics of Oil from Different Species of Cocos Nucifera
Abstract: The study evaluates the characteristies of the extracted oil from different species of coconut (Cocos Nucifera) obtained within the Niger Delta region, Nigeria. The coconut species consists of West Coast Tall (Species A), East Coast Tall (Species B), Maypan (Species C), Tiptur (Species D), Orange dwarf (Species E), Green Dwarf (Species F), Malayan yellow (Species G), Fiji Dwarf (Species H), Macapuna (Species I) and Kings (Species J). The results from …
Published in Emerging Trends in Chemical Engineering · Vol. 8, Issue 3, 2021 · pp. 17–33 Read article
-
Formulation and Evaluation of Herbal Hair Gel
Abstract: India is renowned for its traditional medical practices, such as ayurveda, yoga, Unani, and siddha. The use of herbal plants and their cosmetic preparations to improve human appearance is gaining popularity globally due to their effectiveness, quality and safety. This study aimed to create an herbal hair gel that promotes not only hair growth and health but also offers effective styling. The gel was made by combing ingredients known for …
Published in Research & Reviews : Journal of Herbal Science · Vol. 13, Issue 3, 2024 · pp. 1–9 Read article
-
A Comprehensive Review on Mentha arvensis Species
Abstract: Mentha arvensis L., often referred to as field mint or wild mint, is a fragrant medicinal herb in the Lamiaceae family and is extensively found in temperate and subtropical areas. The plant is appreciated for its essential oil, notably high in menthol, which adds to its unique scent and extensive medicinal possibilities. Historically, M. arvensis has been utilized in several medical systems for addressing digestive issues, respiratory problems, headaches, and …
Published in Research and Reviews : A Journal of Biotechnology · Vol. 16, Issue 1, 2026 · pp. 15–18 Read article
-
Advancements in Zeolite Catalysis for Efficient Oil Refining and Sustainable Energy Production
Abstract: Fossil fuels remain the primary reliable and cost-effective energy source for maintaining the desired product quality. This dominance stems from advancements in petrochemistry and oil refining, driven by substantial investments in research and innovation. The exceptional efficiency of oil refining is largely attributed to the use of zeolites as catalysts, a breakthrough regarded as one of the most significant achievements in modern chemistry. Their applications span across several catalytic processes, …
Published in Journal of Catalyst & Catalysis · Vol. 12, Issue 2, 2025 · pp. 35–42 Read article
-
Study the Impact of Corrosive Pollutants on Building Materials Corrosion
Abstract: Reinforced concrete structures (RCS) may be made more resistant to corrosion by using fiber reinforced polymers (FRP). One of the primary concerns with reinforced concrete constructions is corrosion. It causes disintegration in building material components by interactions with salts, acids, and alkalis. Both within and outside of reinforced properties, pollutants and effluents accelerate disbanding. When bio-waste and building materials come into contact, microorganisms and macro organisms, grow and emit acid …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 2, Issue 2, 2024 · pp. 20–29 Read article
-
Eco-friendly Corrosion Inhibitors for N80 Steel in Hydrochloric Acid
Abstract: An important method of protecting metallic materials against deterioration due to acid corrosion is by the use of corrosion inhibitors. In the present investigation, corrosion inhibition study of two compounds,1-(2-hydroxyethyl)-2-ethylimidazoline(Inh I) and 1-(2-hydroxyethyl)-2-decylimidazoline (Inh II) have been performed for oil-well tubular steel (N80) in 15% HCl using weight loss, electrochemical polarization, AC impedance and SEM. The inhibition efficiencies of the inhibitors follow the sequence, Inh II > Inh I. The …
Published in Journal of Materials & Metallurgical Engineering · Vol. 2, Issue 1-3, 2012 · pp. 71–83 Read article
-
Development of Starch/Keratin/Chitosan Composite Material as a Substitute for Polystyrene in Food Packaging
Abstract: The increase in awareness of the environmental impact of non-biodegradable waste from food packaging, has seen manufacturers push towards initiating production of eco-friendly packaging materials. This research serves as a step forward in the direction of going green, through the development of a composite material from natural, biodegradable polymers, for use in production of packaging material for fast foods. The composite was prepared from starch and chitosan with chicken feather …
Published in Journal of Polymer & Composites · Vol. 7, Issue 3, 2019 · pp. 1–7 Read article
-
Extraction Properties of Mangifera indica Seed Kernels: A Comprehensive Analysis of Their Industrial Potential
Abstract: Mango (Mangifera indica) is widely regarded as one of the world's finest fruits, with a rich nutritional profile, including fiber, riboflavin, carotene, and ascorbic acid. Among its lesser-known components, the mango seed kernel offers significant nutritional and industrial value. Mango kernels are composed of protein, fat, carbohydrates, crude fiber, and ash, and contain bioactive compounds such as polyphenols, phytosterols, and tocopherols. The fat extracted from mango seed kernels has shown …
Published in Journal of Petroleum Engineering & Technology · Vol. 15, Issue 1, 2025 · pp. 22–28 Read article
-
Synthesis of Biofuel from Castor Oil Using Novel Catalysts
Abstract: An essential step in improving biofuels, especially those made from biomass, is hydrodeoxygenation (HDO). HDO's primary goal is to eliminate oxygen atoms from the biofuel feedstock in the form of water, which enhances the fuel's energy density, stability, and compatibility with current fuel.This study uses a large surface area catalyst to investigate the hydrodeoxygenation (HDOx) activity of non-edible oils. In addition to other supports including H-USY and MCM-41, large surface …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 226–237 Read article