Search
868 articles for “composite mater”
-
Thermal Stability and Impact Performance of Basalt–Carbon Hybrid Laminates in Polyimide–Phenolic Matrices
Abstract: The impact resistance and thermal stability of the advanced polymer composites are properties that are necessary for the components that are subjected to dynamic conditions, which show the overall reliability and service performance of the laminates applied in automotive structures, protective casings, etc. These properties prevent premature softening or breakdown during long-term exposure to heat. Impact resistance and thermal stability of composite laminates are studied based on fiber orientation and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 247–260 Read article
-
Experimental and Polynomial Regression Modelling of Tensile Characteristics of Hybrid Jute/Hemp Fiber Composites
Abstract: The present study aims to develop hybrid jute-hemp fiber/epoxy composites by the hand lay-up process with 60% of fiber reinforcement and 40 % of matrix ratio. To measure the change of tensile properties, prepared hybrid composites were tested for normal tensile strength and edge notch tensile (ENT) test as per the ASTM standards. Findings show that, developed composites with reported tensile strength followed by comparing it with fracture toughness. Experimentally, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 47–58 Read article
-
Machine Learning-Driven Polymer Composite Smart Skin for Integrated Sensing in Soft Robotic Systems
Abstract: Soft robotics has grown rapidly, but its progress is still constrained by the limitations of current sensing skins. Most polymer-based sensors provide either flexibility or sensitivity, yet they struggle to deliver real-time communication and adaptive intelligence when deployed in complex robotic environments. This disconnect between material performance and system-level responsiveness forms a critical bottleneck for practical deployment. Existing approaches often treat tactile sensing and wireless communication as separate problems. As …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 121–136 Read article
-
Entrepreneurship Development at The National Petroleum Products Refining Company
Abstract: Petroleum products are very widely used materials, which are processed from crude oil and in oil refineries. Refineries can process petroleum products for various purposes according to the composition of crude oil and customer requests. The purpose of this research is to develop entrepreneurship in the National Petroleum Products Refining Company. This research is a developmental applied research according to the research objectives. In this research, using the theme analysis …
Published in Journal of Petroleum Engineering & Technology · Vol. 15, Issue 2, 2025 · pp. 44–60 Read article
-
Comparative Analysis of Personal Rapid Transit System with Thermoplastic Material for Interconnecting Metro Station with Airport
Abstract: Personal rapid transit (PRT) systems open a slew of new possibilities for solving airport-related transportation issues, both on the ground and in the air. For use in airport applications, the advantages and disadvantages of this mode of transportation are contrasted. An implementation of the ULTra Personal Rapid Transit system to assist passenger and staff vehicle squares at Heathrow is used to showcase the work. The ULTra infrastructure's compact size and …
Published in Journal of Polymer & Composites · Vol. 11, Issue 1, 2023 · pp. 97–108 Read article
-
Optimization of Direct Ink Writing Process Parameters for Liquid Silicone Rubber/TiO2 Composite Ink
Abstract: The purpose of this research is to develop and optimize the Liquid Silicone Rubber (LSR)/Titanium Dioxide (TiO₂) composite inks in Direct Ink Writing (DIW)-based 3D printing systems. The primary research objective was to use enhancement of mechanical, rheological, and dielectric characteristics of LSR using TiO₂ reinforcement but still retain extrusion stability and dimensional consistency. TiO₂ content (0, 5, 10, and 15 wt%) and catalyst and glycerol ratios were regulated and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 240–259 Read article
-
Advances in Biopolymer Based Nanocomposite Materials for Food Packaging Applications
Abstract: This Article provides an in-depth exploration of the recent innovations in biopolymer-based food packaging, highlighting natural materials like starches and proteins, as well as synthetic biopolymers such as polylactic acid (PLA). With the escalating global concerns about environmental degradation and the detrimental effects of plastic waste, there has been a growing emphasis on finding eco-friendly, biodegradable substitutes to reduce plastic pollution and dependence on fossil fuels. Among the biopolymer alternatives, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 390–404 Read article
-
Municipal Material Management
Abstract: The increase in global prosperity and population has led to a significant rise in the generation of Municipal Solid Waste (MSW), posing serious threats to public health and the environment. This study explores the global state of MSW generation, composition, and management strategies, comparing the effectiveness of various technologies across 59 developed and developing countries. A total of 19 criteria for the selection of MSW management technologies are discussed, highlighting …
Published in International Journal of Sustainability · Vol. 1, Issue 2, 2024 · pp. 11–15 Read article
-
Synthesis of Thermal Resistant and Transparent Al2O3 Reinforced Epoxy-Based Composite Coatings
Abstract: This study explores the influence of thermal treatment on the structural, optical, and surface wettability characteristics of epoxy-based composite coatings reinforced with 3 wt.% aluminum oxide (Al₂O₃) nanoparticles. The coatings were synthesized via a dip-coating method on carbon fiber substrates and subjected to controlled thermal treatments at 300 °C, 400 °C, and 500 °C to assess their thermal resilience. X-ray diffraction (XRD) analysis confirmed the structural integrity of the composite …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 178–183 Read article
-
Mechanical Strength Prediction of Nano-Silica Concrete Composites Using Machine Learning Techniques
Abstract: Nano-silica, or nanosilica, refers to silicon dioxide nanoparticles, which are a kind of silica (SiO₂) with diameters that often fall below 100 nanometers. This nanomaterial has attracted considerable attention because of its distinctive characteristics and diverse array of uses, notably in augmenting the performance of materials such as concrete. The integration of nanoparticles with cementitious matrix in nano-silica concrete offers a viable approach to improving the mechanical characteristics and longevity …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 963–973 Read article
-
Synthesis and Characterization of Short Fiber Reinforced Biocomposite Materials
Abstract: The fabrication and characterization of a biocomposite reinforced with banana fiber is proposed in this proposal. The substance used for the grid was epoxy. Hand-layup preparation was the last step in the biocomposite's manufacturing. Biocomposites with various fiber and grid compositions were produced. After treating banana strands with NaOH in the composites manufacturing process, a comparative analysis between biocomposites reinforced with treated and untreated filaments was conducted. The antacid treatment …
Published in Journal of Experimental & Applied Mechanics · Vol. 15, Issue 2, 2024 · pp. 42–53 Read article
-
Bio-Inspired Nanostructured Catalysts for CO2 Valorization: Green Chemistry Approaches in Polymer Nanocomposites for Sustainable Energy Solutions
Abstract: Artificial photosynthesis is a pioneering technology inspired by natural photosynthetic processes, offering a sustainable solution to address global energy crises and mitigate environmental impact. By harnessing solar energy, artificial photosynthesis aims to convert carbon dioxide (CO₂) and water into high-energy chemicals, such as methanol and hydrogen, while concurrently reducing harmful greenhouse gas emissions. This innovative process represents a transformative shift toward carbon-neutral or even carbon-negative energy production, helping reduce dependency …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 38–46 Read article
-
Study of the Rheological, Physical-Mechanical Properties of Disposed Polypropylene and Polyvinyl Chloride Binary Mixtures
Abstract: In this study, various compositions were prepared by modifying the decommissioned polypropylene (PP)-based polymer waste with polyvinyl chloride (PVC) in different proportions for the purpose of modification, and the flow index and physical and mechanical properties of their alloys were studied. As a result of the research, the following results were obtained. PP/PVC binary compositions were prepared and samples were obtained based on 6 different proportions by changing the amount …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 Read article
-
Influence of Gd Doping in Structural, Morphological and Optical Properties of Zno Nanostructures Synthesised Via Sol-Gel Processes
Abstract: In this study, nanocrystalline Zn1-xGdx (x=0.0 and 0.03) samples were synthesised via the Sol-gel combustion process. An array of analytical techniques was employed to examine the prepared samples to determine their different physical features. For both pristine and Gd-doped samples, the crystal symmetry is hexagonal with the P63mc space group which is verified via the Rietveld refinement analysis of X-ray diffraction (XRD) data. The atoms' bond length Zn-O and bond …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 219–225 Read article
-
Polymer-Based Ankle-Foot Orthoses: Innovations in Material Selection and Functional Enhancement
Abstract: Ankle-foot orthoses (AFOs) are critical devices in rehabilitative therapy for patients with foot drop due to neurological disorders such as stroke, multiple sclerosis, and cerebral palsy. These conditions impair dorsiflexion, making walking difficult and increasing the risk of falls. Traditional AFOs, often made from rigid thermoplastics, provide support but limit flexibility and patient comfort. Recent advancements in polymer chemistry have introduced innovative materials that enhance the functionality, durability, and effectiveness …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 49–55 Read article
-
Comparative Analysis of Pond Ash as a Partial Replacement of Sand as Subbase Material for Concrete Paver Block Hardstand sustaining storage of Bulk Cargo
Abstract: This work presents an industrial waste-derived subbase material that can take the place of conventional granular material for subbase in hardstand foundation construction. This industrial waste hugely deposited in the ash lagoons namely Pond Ash (PA) which is globally generated at an amount of 780 Metric Tons from thermal power plants annually ,as foundation material for hardstand construction, will not only help the cause of residual waste disposal problems but …
Published in Journal of Geotechnical Engineering · Vol. 12, Issue 3, 2025 · pp. 32–45 Read article
-
Comparative Analysis of Disc Brake Using Eco-Friendly Material
Abstract: Brakes are crucial components for slowing or stopping the vehicle. Almost all vehicles use disc brakes. The working of a disc brake is simple; when the brake pedal is pressed, braking pads are forced mechanically against the rotor or disc on both surfaces. The friction generated between the rotor and brake pads slows down the vehicle. The design and materials of disc brakes play a significant role in their performance. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 532–544 Read article
-
Recent Advances in Hybrid Polymer–Cement Composites: Interfacial Engineering, Self-Curing Mechanisms, and Microstructural Performance
Abstract: The increasing demand for high-performance polymer-modified cementitious composites has stimulated extensive research into hybrid self-curing composite systems with engineered aggregate phases. Self-curing hybrid polymer–cement composite systems, using recycled aggregates, constitute one of the solutions proposed by researchers to overcome problems related to moisture loss during the curing process, shrinkage, cracking, and the limited amount of natural aggregate available. This critical review provides an overview of recent developments concerning the production, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Preparation of Transparent and Thermal Resistant Zirconia Reinforced Epoxy Based Polymer Matrix Composite Coatings
Abstract: This study investigates the thermal stability, structural characteristics, optical transparency, and surface wettability of epoxy-based composite coatings reinforced with 2 wt.% zirconia (ZrO₂) nanoparticles. The composite coatings were synthesized using a dip-coating technique on carbon fiber substrates and subsequently subjected to thermal treatments at 300 °C, 400 °C, and 500 °C. Structural analysis using X-ray diffraction (XRD) confirmed the amorphous nature of the epoxy matrix with no significant crystallization or …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 171–177 Read article
-
Comparative Analysis of Sustainable Materials in Road Construction: A Review
Abstract: The immediate need for sustainable infrastructure has driven research into new materials in road construction with the goal of reducing environmental degradation and enhancing resource efficiency. This review is a comparative analysis of four innovative technologies involving industrial and natural waste products: recycled aggregates from construction and demolition (C&D) waste, feldspar powder from lithium mining, stabilized dam sediments using eucalyptus ash, and calcium carbide residue (CCR) blended with dredged sludge. …
Published in Journal of Construction Engineering, Technology & Management · Vol. 15, Issue 3, 2025 · pp. 93–98 Read article