Search
1954 articles for “Performance” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
-
Aerodynamic Optimization of UAV Wings Using Machine Learning
Abstract: Unmanned Aerial Vehicles (UAVs) are increasingly deployed across defense, transportation, agriculture, and environmental monitoring, demanding improved aerodynamic efficiency to enhance endurance, stability, and payload capacity. Traditional aerodynamic optimization approaches, relying on computational fluid dynamics (CFD) simulations and wind tunnel experiments, are often time-consuming and computationally expensive. This study proposes a machine learning (ML)-driven framework for the aerodynamic optimization of UAV wing geometries, aiming to significantly reduce design cycles while improving …
Published in International Journal on Drones · Vol. 2, Issue 1, 2026 · pp. 1–7 Read article
-
Synergistic Effect of Green Nanofillers on Basalt–Kenaf Reinforced Sustainable Polymer Composites
Abstract: This study examines the synergistic impact of green nanofillers on the mechanical and structural properties of basalt–kenaf fiber reinforced polyester composites, with the objective of developing sustainable, high-performance polymer materials. The composites were produced with different fiber ratios: B1 (70% basalt, 30% kenaf), B2 (60% basalt, 40% kenaf), and B3 (50% basalt, 50% kenaf), and were reinforced with 1 wt.% green-synthesized nano-TiO2, obtained using an eco-friendly sol–gel technique with plant …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1248–1262 Read article
-
Thermal Stability and Sound Absorption Behaviour of Sisal–Luffa Hybrid Epoxy Composites for Automotive Interior Applications
Abstract: Natural fiber–reinforced composites are gaining popularity as substitutes for synthetic fiber composites because of their environmental and sustainability advantages. Their adoption is steadily increasing across various industries. In automotive interior applications, these materials must exhibit strong thermal stability and efficient sound absorption to meet performance requirements. In this experiment, composites were made by mixing sisal and luffa fibers with epoxy resin. The hand lay-up method was used for fabrication. Two …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 144–157 Read article
-
A Computational Study of Lift and Drag Characteristics for NACA 4415 and NACA 2412 Aerofoils
Abstract: The performance of an aerofoil is crucial in designing wind turbine blades, aircraft wings, and other aerodynamic surfaces. This project presents a comparative analysis of two widely used aerofoil profiles, NACA 4415 and NACA 2412, to study their lift and drag characteristics under different flow regimes. The aerofoil geometries were developed using the NACA four-digit notation and modeled in ANSYS Design Modeler. Numerical simulations were conducted in ANSYS Fluent for …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1298–1315 Read article
-
Understanding Sentiment Trends Through Zero-Shot and Few-Shot Learning Models
Abstract: The requirement for large, manually labeled datasets is one of the main barriers to applying sentiment analysis algorithms in specialized or rapidly evolving disciplines in the present natural language processing (NLP) landscape. This work investigates a paradigm shift from traditional fully supervised learning to data-efficient methods, specifically zero-shot learning (ZSL) and few-shot learning (FSL). This study uses the advanced capabilities of instruction-tuned large language models (LLMs), like GPT-4, to assess …
Published in International Journal of Computer Science Languages · Vol. 4, Issue 1, 2026 · pp. 01–08 Read article
-
Enhancement of Flexural Strength in FDM-Printed Components through Taguchi-Based Process Parameter Optimization
Abstract: Additive manufacturing (AM), especially Fused Deposition Modeling (FDM), has emerged as a widely adopted and versatile method for producing three-dimensional components. The process involves the deposition of a thermoplastic filament in a semi-molten state, which solidifies in successive layers to form the final structure. While this method enables the production of complex geometries at relatively low cost, the printed parts often exhibit inferior surface quality and reduced mechanical performance compared …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 272–280 Read article
-
Effect of Microbial Species and Inoculum Dosage on Anaerobic Digestion
Abstract: This work aims at studying the effect of microbial species and inoculum dosage on anaerobic digestion of food waste using cattle rumen content as inoculum. Four different batch runs were carried out with different percentage inoculations which were (control sample), 25% dosage, 50% dosage and 75% dosage. To have both logical and scientific explanation why the inoculated samples had better performance than the control sample, microbial identification was carried out …
Published in Emerging Trends in Chemical Engineering · Vol. 13, Issue 1, 2026 · pp. 12–23 Read article
-
Investigations of A Solar Dryer With Thermal Storage
Abstract: This study presents the design, building, and performance evaluation of a low-cost mixed-mode natural convection solar cabinet dryer in conjunction with a latent heat thermal energy storage system. The work's goal is to reduce post-harvest losses in rural and semi-urban areas by offering an effective and reasonably priced method of preserving agricultural goods. The dryer is made out of a transparent polycarbonate lid to allow for solar heat gain, an …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 13, Issue 1, 2026 Read article
-
NexCart – The Ultimate Shopping Platform: A Full-Stack E-Commerce Web Application
Abstract: The rapid growth of internet technology has significantly transformed traditional shopping methods into digital commerce platforms. This paper presents NexCart, a web-based e commerce application designed to provide a simple, scalable, and secure online shopping experience. The system allows users to browse products, manage shopping carts, place orders, and perform secure transactions efficiently. The platform is built with HTML, CSS, and JavaScript on the front end, while the back end …
Published in Journal of Open Source Developments · Vol. 13, Issue 1, 2026 Read article
-
Multiphysics Optimization of Polymer–Metal Hybrid Electrode Geometry in Electrostatic Precipitators for Enhanced Particle Collection Efficiency
Abstract: Electrostatic precipitators (ESPs) remain one of the most effective technologies for controlling fine particulate emissions in industrial exhaust systems. However, their performance is strongly influenced by electrode geometry and material characteristics, which govern electric field distribution, corona stability, and particle migration behaviour. In this study, a comprehensive numerical investigation is carried out to optimize electrode geometry using a multiphysics modelling framework, while introducing a novel polymer–metal hybrid design to enhance …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 701–716 Read article
-
Study on Single-Slope Solar Still for Experimental and Data-Driven Analysis for Improving Productivity with Different Basin Materials.
Abstract: This study investigates the single-slope solar still under the diurnal variation of water temperature and distillate yield under identical operating conditions. Experimental analysis was conducted to evaluate the performance enhancement through the incorporation of natural basin materials, namely hemp and sand. The water distillation process is focused on improving potable water productivity and thermal behaviour. The inclusion of hemp and sand in the basin leads to noticeable differences in productivity …
Published in Emerging Trends in Chemical Engineering · Vol. 13, Issue 2, 2026 · pp. 31–46 Read article
-
Structure–Property Modeling of Cement-Based Multi-Component Composites Using Ensemble Machine Learning and Explainable Feature Attribution
Abstract: Accurate prediction of compressive strength is central to structure–property optimization, quality control, and sustainability-driven design in cement-based composite materials. Cementitious systems represent heterogeneous multi-phase composites composed of reactive binder matrices and dispersed aggregate phases, whose macroscopic mechanical performance emerges from complex nonlinear interactions among constituents and curing-dependent microstructural evolution. This study develops a data-driven structure–property modeling framework to quantify the nonlinear dependence of compressive strength on multi-component composite composition and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 112–131 Read article
-
Cyber-Secure IoT Framework for Monitoring Fiber-Reinforced Polymer Composites Using Embedded Sensors
Abstract: The present research paper suggests a cyber-safe Internet of Things system in real-time monitoring of fiber-reinforced polymer composites with inbuilt sensors. It is aimed at enhancing structural health maintenance, using sensual, intelligent analysis, and data protection in the same platform. Multi-layer architecture An embedded sensor, signal processing, anomaly detection and lightweight layer of cyber-security are developed. Experimental validation is done under controlled conditions and the performance is measured by these …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 434–458 Read article
-
Experimental and Process Optimization Study on Thermal Stress Reduction in TiC–Steel Brazed Joints Using Polymer-Derived Composite Interlayers
Abstract: In this, an experimental investigation aimed at reducing crack formation due to thermal stress in TiC-steel brazed joints through optimization of key process parameters is presented. The primary objective was to develop an integrated and reliable brazing strategy by examining the effects of filler material selection, brazing gap, cooling conditions and type of flux. In this study, polymer-derived composite interlayers were developed through controlled synthesis and nanocomposite engineering to mitigate …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 524–540 Read article
-
Enhancement of Mechanical and Tribological Properties of Aluminum-Titanium Carbide (Al-TiC) Metal Matrix Composites via Powder Metallurgy
Abstract: Metal matrix composites (MMCs) have emerged as a result of the increasing need for sophisticated lightweight materials with exceptional mechanical and tribological qualities. For structural and wear-critical applications, aluminum-based composites supplemented with ceramic particles such as titanium carbide (TiC) have shown great promise. In this work, aluminum-TiC composites made by powder metallurgy a process that guarantees even particle dispersion, regulated porosity, and the creation of near-net shapes are fabricated, mechanically …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 366–374 Read article
-
Review On BIM-Based (Revit+Robot Software) Comparative Wind Load Analysis of High-Rise RCC Buildings in Zone-III, IV and V
Abstract: Wind load is one of the most critical factors influencing the design and serviceability of high-rise reinforced concrete (RCC) buildings. As building height increases, wind-induced effects such as storey drift, lateral displacement, and structural stiffness become dominant design considerations. Numerous studies have been conducted using conventional and advanced techniques such as Finite Element Method (FEM), Computational Fluid Dynamics (CFD), and Building Information Modelling (BIM). However, limited research focuses on comparative …
Published in Journal of Structural Engineering and Management · Vol. 13, Issue 2, 2026 Read article
-
Self-Healing Polymeric Composites Reinforced with Green Synthesized Nanoparticles
Abstract: The development of sustainable self-healing polymeric materials is critical for enhancing durability and service life in advanced engineering applications. In this study, zinc oxide (ZnO), magnesium oxide (MgO), and ferric oxide (Fe₂O₃) nanoparticles were green-synthesized using Allium cepa extract and incorporated into epoxy-based polymeric composites to improve mechanical, thermal, and self-healing properties. This bio-based synthesis is eco-friendly and safe alternative to harsh chemical techniques, utilizing natural antioxidants to stabilize the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 305–314 Read article
-
Microbially Modified Sustainable Cementitious Composites Using Industrial Ash Fillers
Abstract: The growing demand for sustainable, durable construction materials has driven the development of bio-engineered cementitious composites incorporating industrial by-products and self-healing mechanisms. This study investigates a microbially modified cementitious composite that integrates industrial ash fillers with bacteria-based self-healing technology to enhance mechanical performance and microstructural integrity while reducing cement consumption. Cement was partially replaced with industrial ash at 20%, 30%, and 40% replacement levels, and a uratolytic bacterial strain (Bacillus …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 331–350 Read article
-
Optimized Utilization of Kota Stone Slurry Waste in Fly Ash–Based Geopolymer Mortar: A Taguchi-Driven Approach
Abstract: The large-scale generation of stone-processing wastes presents a critical sustainability challenge and an opportunity for value-added reuse in construction materials. This study develops a high-performance fly ash geopolymer mortar by partially replacing Class F fly ash with Kota stone slurry waste (KSSW) and optimizing the key mix parameters using a Taguchi design framework. Five governing factors—binder replacement level, NaOH molarity, sodium silicate–to–sodium hydroxide ratio (SS/SH), curing temperature, and alkaline solution-to-binder …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 426–445 Read article
-
Advanced Solid-State Battery Technologies for Sustainable Energy Storage
Abstract: The increasing global demand for sustainable and high-performance energy storage systems has accelerated research in advanced battery technologies. Conventional lithium-ion batteries, while widely used in portable electronics, electric vehicles, and grid storage systems, face limitations such as safety risks, limited energy density, slow charging rates, and degradation over repeated cycles. To overcome these challenges, advanced solid-state battery technologies have emerged as a promising solution for next-generation energy storage applications. This …
Published in International Journal of Solid State Innovations & Research · Vol. 4, Issue 1, 2026 Read article