Search
767 articles for “Material Engineering”
-
Modeling Deformation Mechanisms of Horseshoe Tunnel Excavation In Layered Ground Using Flac 3D
Abstract: In the modern era of civilization, the transportation sector plays a pivotal role in a nation's development. Efficient transportation networks are essential for economic progress, and tunnels are particularly valuable in this regard, as they help reduce travel time and fuel consumption. With growing interest in underground infrastructure, researchers are increasingly focusing on tunnel-related studies. This paper examines the deformational behavior of a horseshoe-shaped tunnel constructed in layered soil, subjected …
Published in Journal of Geotechnical Engineering · Vol. 12, Issue 3, 2025 · pp. 46–61 Read article
-
Engineered Hybrid Nanoclay-Infused Nano-Polymers for Multifunctional Anti-Corrosive Coatings
Abstract: Polymer nanocomposites reinforced with layered nanofillers have emerged as an effective route to enhance structural stability in protective coating applications. Polymer–clay nanocomposites also provide a promising route to enhance mechanical robustness and environmental durability in coating systems. In this study, a hybrid epoxy–polyurethane (EPU) coating was reinforced using organo-modified montmorillonite (o-MMT) and layered double hydroxide intercalated with 2-mercaptobenzothiazole (LDH–MBT). Uniform dispersion and interfacial anchoring between the nanoclays and polymer chains …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 40–53 Read article
-
Simulation and Experimental Studies on the Effect of Injection Moulding Parameters on Tensile Properties of ABS Thermoplastic Specimen
Abstract: AbstractThe injection moulding process is the most widely used method of manufacturing Engineering thermoplastics. Thermoplastic blends and composites are suitably replacing metals and ceramics in most circumstances. This trend is mainly due to the versatility and compatibility of the injection moulding process. However, the injection moulding conditions has a significant impact on the aesthetic and functional characteristics of the final product as the flow induces substantial variation in the properties …
Published in Journal of Polymer & Composites · Vol. 3, Issue 2, 2015 · pp. 1–10 Read article
-
Next-Generation Biodegradable Polymer Composites: Enhancing Mechanical and Thermal Performance through Green Reinforcements
Abstract: Next-generation biodegradable polymer composites, combining compostable matrices such as polylactic acid (PLA), polyhydroxyalkanoates (PHAs) and starch-based polymers with green reinforcements (e.g., nanocellulose, lignin, agricultural residues and other bio-fillers), offer a pragmatic route to reconcile high performance with end-of-life sustainability. This paper examines recent advances in the design, processing and interfacial engineering of such composites to enhance mechanical stiffness, strength, toughness and thermal stability while preserving—or intentionally controlling—biodegradation pathways. Emphasis is …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1780–1794 Read article
-
Designing and Modeling of Giant Magnetoresistance (GMR) Materials based Devices in Electrical Power and Biomedical Systems
Abstract: This paper presents Designing and Modeling of Giant Magnetoresistance (GMR) Devices in Electrical Power and Biomedical Systems and the related materials. The GMR, inverse GMR, and Spin valve using exchange bias have been analytically derived and discussed from the designing point of view for optimizing the performance of the GMR based Devices in Electrical systems. More recently, GMR has been used in sensors, magnetic memory chips, and hard-disk read-heads. The …
Published in Research & Reviews : Journal of Physics · Vol. 14, Issue 1, 2025 · pp. 22–32 Read article
-
Study of Nano Additives in Concrete mix Proportioning Using Nano Particle
Abstract: This research literature reviews on nanomaterials in concrete. Now, the conventional concrete Properties of nanomaterial utilization have been introduced to various attentions to increase. Ultimately, as an introduction, the nanomaterial is increasing the strength and durability of the Concrete. The nanomaterial is described as the material that includes the particle size Less than 200 nm. While the investigation of Concrete in the importance of nanomaterials, the demand is at least …
Published in Journal of Construction Engineering, Technology & Management · Vol. 10, Issue 1, 2020 · pp. 37–48 Read article
-
Microwave Processing of Foods: Applications and Future Perspectives
Abstract: This paper introduces microwave-assisted processing of foods, fundamental principles and future perspectives provides a comprehensive exploration of the evolving landscape of microwave technology in the food processing. Despite widespread use in households, the industrial application of microwave processing remains relatively untapped. The narrative delves into specific applications, such as blanching, baking, pre-cooking, thawing and tempering, pasteurization, sterilization, microwave-assisted frying, rapid extraction, drying and inactivation of microorganisms, emphasizing the rapid temperature …
Published in International Journal of Nutritions · Vol. 1, Issue 2, 2024 · pp. 27–32 Read article
-
Design And Fabrication of Contactless Magnetic Gears
Abstract: Modern engineering prioritizes speed, efficiency, and reliability, spurring innovations like contactless magnetic gear systems that transmit torque through interacting magnetic fields from permanent magnets, eliminating physical contact to drastically cut friction, backlash, wear, lubrication needs, and heat—operating silently with minimal vibration and peak efficiencies up to 99% under ideal conditions, outperforming traditional gears in low-speed, high-torque direct-drive applications such as motors. The design centers on two rotors: an outer high-speed …
Published in Trends in Mechanical Engineering & Technology · Vol. 16, Issue 2, 2026 · pp. 42–49 Read article
-
Seismic Analysis of G+30 RCC Frmaed Structure and Use of R.C Jacketing
Abstract: In high-rise buildings, such as G+30 reinforced concrete (RCC) framed structures, key concerns during seismic events include maintaining structural integrity, preventing catastrophic collapse, and ensuring the safety of occupants. Seismic retrofitting is a vital process aimed at enhancing the resilience of such buildings and infrastructure against earthquake forces, by strengthening their ability to withstand seismic activity. This abstract provides an overview of numerous seismic retrofitting projects implemented worldwide, focusing on …
Published in Recent Trends in Civil Engineering & Technology · Vol. 14, Issue 3, 2024 · pp. 20–37 Read article
-
Tailoring Toughness of Pineapple Leaf Fiber-Reinforced Epoxy Composites Using Halloysite Nanotubes
Abstract: This comprehensive study investigates the effects of halloysite nanotubes (HNTs) on the impact strength and fracture toughness of pineapple leaf fabric-reinforced epoxy (PALF/Ep) composites with an emphasis on sustainable material development. ASTM D256 and ASTM D5045 standards were followed in the fabrication of the composites. HNT weight percentages were systematically changed from 0 to 3wt% through using solution mixing and manual lay-up techniques, and vacuum bagging was used to obtain …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 261–272 Read article
-
Selective Recovery of Valuable Chemicals from Tire Pyrolysis Oil: A Sustainable Approach
Abstract: The generation of waste/scrap/end-of-life tires (ELTs) poses severe environmental challenges globally. For the disposal of huge numbers of ELTs (generated every year) using conventional recycling methods, like as landfill or incineration, are not preferred due to their adverse environmental impacts. To overcome this problem, an alternative and promising technology is developed -the pyrolysis of waste tires. Pyrolysis is a thermochemical process that decomposes organic materials (Rubber Hydrocarbons) in the absence …
Published in Journal of Catalyst & Catalysis · Vol. 12, Issue 3, 2025 · pp. 31–43 Read article
-
Partial Replacement of Cement by Kota Stone Slurry in Mortar
Abstract: AbstractKota stone is one of the lime stones which is found in Kota, Jhalawar, and Chittor districts of Rajasthan. It is a very fine-grained siliceous calcium carbonate rock of sedimentary nature. During cutting and polishing process, a lot of material remains unused, and this waste may be called as Kota stone cutting and polishing waste. The disposal of Kota Stone Slurry (KSS) from the Kota stone industry is one of …
Published in Recent Trends in Civil Engineering & Technology · Vol. 7, Issue 3, 2017 · pp. 8–13 Read article
-
Analysis of Three Types of Quartzite as Coarse Aggregate Material and their Impact on Compressive Strength on Concrete
Abstract: Aggregates are the most important constituents of concrete. They give body to the concrete, reduce shrinkage, enhance strength and effect economy. The quartzite rock available in Delhi is a prominent geological material available in the entire Aravali range. Most of the manufacturing of concrete is going on using quartzite as aggregate material. However, three different categories of quartzite have been classified on the basis of its colour composition namely greyish …
Published in Recent Trends in Civil Engineering & Technology · Vol. 7, Issue 1, 2017 · pp. 1–8 Read article
-
Recent Advances in Hybrid Polymer–Cement Composites: Interfacial Engineering, Self-Curing Mechanisms, and Microstructural Performance
Abstract: The increasing demand for high-performance polymer-modified cementitious composites has stimulated extensive research into hybrid self-curing composite systems with engineered aggregate phases. Self-curing hybrid polymer–cement composite systems, using recycled aggregates, constitute one of the solutions proposed by researchers to overcome problems related to moisture loss during the curing process, shrinkage, cracking, and the limited amount of natural aggregate available. This critical review provides an overview of recent developments concerning the production, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 1323–1332 Read article
-
Production of Oil from Agro Seeds using Mechanothermal Extraction: A Review of Chemical, Pharmaceutical, and Food Applications
Abstract: The increasing demand for sustainable raw materials and renewable industrial resources has intensified research into the extraction of oils from agro seeds for chemical, pharmaceutical, and food applications. Agro-seed oils are valuable due to their biodegradability, nutritional composition, eco-friendliness, and wide industrial applicability. This review examines the production of oil from agro seeds using mechanothermal extraction techniques with emphasis on extraction efficiency, physicochemical characteristics, and industrial utilization. Mechanothermal extraction combines …
Published in Journal of Catalyst & Catalysis · Vol. 13, Issue 2, 2026 · pp. 09–26 Read article
-
GEOPOLYMER CONCRETE BY LITHIUM BASED GLASS WASTE WITH FLY ASH
Abstract: AbstractThe cement, fly ash, and slag used in this study are local materials in compliance. The global warming is the major issue when limestone and clays are crushed and heated to high temperatures. We are using waste materials, its components, or its production process that does not cause any environmental problems, or it has high performance and life cycle sustainability. The waste material used in this research is three times …
Published in Recent Trends in Civil Engineering & Technology · Vol. 8, Issue 1, 2018 · pp. 1–5 Read article
-
Mechanical Performance and Material Properties of Nsm CFRP Polymer System
Abstract: Near-surface mounting systems are an advanced embedded technique application of CFRP composites in which the efficiency of the structure is mostly dominated by polymer matrix properties and interface stress transfer mechanisms. This review presents a holistic materials-based perspective on the experiment, analytical, and numerical studies conducted on the NSM-CFRP composite system, specifically on the behavior of the epoxy adhesive, interfacial behavior of composite–substrate system, and related structure–property relationships. The literature …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 311–319 Read article
-
Study on Effect of Insulation Design on Thermal-Hydraulic Analysis: An Important Aspect in Subsea Pipeline Designing
Abstract: The most imperative and challenging operational hazards for oil and gas pipelines are the risks associated with the transportation of fluids. When water, oil and gas flow simultaneously inside the pipeline, there are quite high chances that, water and hydrocarbon fluids can form and deposit hydrate such as wax and asphaltene on the inner surfaces of the pipeline and gradually blocking it. In this paper we explore and compare the …
Published in Journal of Petroleum Engineering & Technology · Vol. 4, Issue 1, 2014 · pp. 33–44 Read article
-
Enhancing The Mechanical Performance of Al6061/Graphite Composites Reinforced with Sic and Aluminium Oxide Processed by Stir Casting
Abstract: The study investigates the mechanical properties of aluminum alloy Al6061 reinforced with varying proportions of silicon carbide (SiC) (0 wt%, 4 wt%, 5 wt%, and 6 wt%) and aluminum oxide (Al₂O₃) (0 wt%, 4 wt%, 3 wt%, and 2 wt%), with a constant addition of 1 wt% graphite. The composites were fabricated using the stir casting process, an efficient and economical method for uniformly distributing ceramic reinforcements within the metal …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 66–74 Read article
-
Synergistic Effect of Green Nanofillers on Basalt–Kenaf Reinforced Sustainable Polymer Composites
Abstract: This study examines the synergistic impact of green nanofillers on the mechanical and structural properties of basalt–kenaf fiber reinforced polyester composites, with the objective of developing sustainable, high-performance polymer materials. The composites were produced with different fiber ratios: B1 (70% basalt, 30% kenaf), B2 (60% basalt, 40% kenaf), and B3 (50% basalt, 50% kenaf), and were reinforced with 1 wt.% green-synthesized nano-TiO2, obtained using an eco-friendly sol–gel technique with plant …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1248–1262 Read article