Search
920 articles for “1-D analysis”
-
Rheological behaviour analysis of prepared nano-cutting fluids from Al2O3 and TiO2
Abstract: In this research paper, an attempt has been made to characterize and analyse the rheological properties of two samples of nano-cutting fluids. Nanoparticles of Al2O3 and TiO2 were characterized by SEM and EDS. The high peaks showed the respective presence of aluminium, oxygen for alumina and titanium and oxygen for titanium dioxide. The two samples of nano-cutting fluids were prepared. Alpha alumina, α-Al2O3 nanoparticles were used for the preparation of …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 329–338 Read article
-
Mechanical and Physicochemical Characteristics of Nano-Hydroxyapatite Polymer Composites
Abstract: This study focuses on the development and characterization of nano-hydroxyapatite (nHAp)-reinforced poly (lactic acid) (PLA) composites for biomedical applications. The composites, prepared with varying nHAp content (5–25 wt%), were evaluated for their mechanical and physicochemical properties, including tensile strength, Young’s modulus, elongation at break, thermal stability, hydrophilicity, and crystallinity. Results revealed that tensile strength increased significantly with the incorporation of nHAp, reaching a peak of 62 MPa at 15 wt%, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 115–125 Read article
-
Evaluation of Raw Cow Milk Preservation Using Extracted Mango Seed Kernels and Rosemary Leaves Powder, Ethiopia
Abstract: The study aimed to evaluate the raw cow milk preservation using extracted mango seed kernels and rosemary leaves powder. Fresh cow milk samples collected aseptically from Debre Birhan University farm. The fresh cow milk treated at different concentrations (0.5, 1.0 and 1.5%) of ethanol extract of mango seed kernel, rosemary leaves and equal mix of both extracts with 100 ml of milk then store at room temperature. Mango seed kernels …
Published in Research and Reviews : Journal of Dairy Science and Technology · Vol. 14, Issue 2, 2025 · pp. 20–28 Read article
-
Precision Medicine for Neurofibromatosis Type 1: Progress and Prospects in Drug Discovery
Abstract: Objective: The development of neurofibromas, café-au-lait spots, and other neurological problems are the hallmarks of neurofibromatosis type 1 (NF1), a hereditary disorder. The dearth of efficacious pharmaceutical therapies underscores the need for novel therapeutic approaches, even in the face of clinical variability. Through very accurate prediction of the binding affinity of possible therapeutic drugs with the target protein, the computational technique known as “molecular docking” has become a potent tool …
Published in International Journal of Bioinformatics and Computational Biology · Vol. 2, Issue 1, 2024 · pp. 01–15 Read article
-
Dynamic Response Analysis of Isotropic and Orthotropic Rectangular Plates under Clamped-Free Conditions
Abstract: This study explores Theoretical and numerical tools of determining the free vibration properties of isotropic and fiber-reinforced composite rectangular plates. The effect of anisotropy of materials on the dynamic response of the plates is compared between the Aluminium plates and the glass-epoxy laminates. The model used in the study is a three-dimensional finite element model that is designed using a combination of SolidWorks and ANSYS workflow. Clamped-free boundary conditions are …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 258–274 Read article
-
A Comparative Study Between the Sale of Petrol, Electric, and Diesel Four Wheelers: An Indian Context
Abstract: Petrol, diesel, and electric are the fuel types that are used all around the world. While electricity has gained popularity in recent years due to its low cost compared to fossil fuels, one of the main reasons for an exponential surge in electric vehicles is the development of advanced electric batteries. While discussing in the context of India mainly, the rising petrol prices resulted in consumers switching to electricity. Despite …
Published in Journal of Automobile Engineering and Applications · Vol. 12, Issue 1, 2025 · pp. 11–19 Read article
-
A study on Public Perception and self-medication practices with Over-the-counter (OTC) Drugs
Abstract: Over-the-counter (OTC) medications are commonly used by individuals for self-medication due to their easy availability and the general belief that they are safe. However, misuse can lead to negative health outcomes such as adverse reactions, drug interactions, and delays in seeking professional medical care. In a country like India, where enforcement of drug regulations can vary and socioeconomic factors play a major role, the practice of self-medication is especially widespread. …
Published in Research and Reviews: A Journal of Pharmaceutical Science · Vol. 16, Issue 3, 2025 · pp. 01–07 Read article
-
Exploration of Mechanical Characteristics and Microstructural Analysis of Copper Matrix Composites with Hybrid Reinforcements via Muffle Furnace Sintering
Abstract: Metal Matrix Composites (MMCs) have drawn a lot of interest in the area of innovative materials because of how widely they may be used. Due to their extraordinary qualities, such as high thermal conductivity, higher temperature endurance, improved corrosion resistance, and great weldability, copper matrix composites stand out among them. These qualities make them desirable and promising materials for uses including heat exchangers, automotive parts, and electrical components. In this …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 119–126 Read article
-
Lamivudine And Dolutegravir Simultaneous Dosage Forms Determined and Validated Using The RP-UPLC Method
Abstract: RP-UPLC has been used to produce a straightforward, precise, and accurate approach for the simultaneous estimation of dolutegravir and lamivudine in a pharmaceutical dose form. A HSS C18 column of 2.8 x 50 mm and featuring particles with a size of 1.6 μm was used to process the chromatogram. A mixture of 70:30 Buffer Na2HPO4 and methanol made up the mobile phase, which was pushed across the column at a …
Published in Emerging Trends in Personalized Medicines · Vol. 1, Issue 1, 2024 · pp. 5–13 Read article
-
Comparative Analysis of Different Mechanical Properties of Banana Pseudostem Fiber and Pineapple Leaf Fiber Reinforced Polymer Composite
Abstract: In this research, a hybrid natural fiber polymer composite is prepared using different combinations of banana pseudostem fiber and pineapple leaf fiber in a discontinuous reinforcement phase and epoxy polymer in a continuous matrix phase. For the preparation of the composite, the hand layup technique is used and important mechanical characteristics, namely tensile, flexural, and impact strength, are determined. The findings of this investigation represent that the highest values of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1248–1256 Read article
-
Bioinspired Nanocomposite Bone Pins: Fabrication, Evaluation, and Suitability for Orthopedic Implant Applications
Abstract: Bone tissue engineering (BTE) requires scaffolds that mimic bone’s mineral–organic composition, offering mechanical strength, bioactivity, and degradation rates compatible with regeneration. Conventional metallic implants face corrosion and toxic ion release risks, while ceramics like hydroxyapatite (HAp) are bioactive but brittle. This study reports a multifunctional hybrid scaffold combining HAp for osteoconductivity; polycaprolactone (PCL) and collagen for flexibility and biocompatibility with sodium citrate for nanoparticle dispersion, ferrocene (Fc) for catalytic bioactivity; …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 526–540 Read article
-
Unraveling Mixed Ionic-Electronic Conduction in Lithium-Substituted Rubidium Tetra Titanates via Dielectric Spectroscopy and EPR Analysis
Abstract: Lithium-substituted Rubidium Tetra Titanates with varying concentrations of lithium carbonate (Li₂CO₃) — specifically 0.01, 0.05, and 0.1 molar percentages — were successfully synthesized using a conventional high-temperature solid-state reaction method. The resulting compounds follow the general chemical formula Rb₂₋ₓLiₓTi₄O₉. X-ray diffraction (XRD) analysis confirmed that lithium ions were successfully incorporated into the crystal lattice without disrupting the fundamental layered structure of the host material. The crystal system remained monoclinic across …
Published in Research & Reviews : Journal of Physics · Vol. 14, Issue 2, 2025 · pp. 19–29 Read article
-
Experimental Study and Comparative Analysis of Fly Ash, GGBS, and Silica Fume in Nominal Concrete and Ternary Blended M25 Concrete
Abstract: This study examines the effects of partially substituting 30% of cement by weight with ternary supplemental cementitious materials (TSCMs) with mix proportions of M1, M2, and M3. These materials include fly ash (10%,15%,15% in M1, M2, and M3), ground granulated blast furnace slag (GGBS) (10%,8%,10% in M1, M2, and M3), and silica fume SF (15%,10%,5% in M1, M2, and M3) on the mechanical and durability properties of M25 grade concrete …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 43–50 Read article
-
Molecular Characterization of Circulating Rota Viral Strain causing infantile diarrhoea in Tripura, North East India
Abstract: Introduction: North Eastern India is geographically distinct from rest of India and the trend of Rota viral diarrhoea among children below 5 years of age group is not well studied yet. The Government of India introduced the oral rotavirus vaccine (ROTAVAC) in 2016 as part of the Universal Immunization Programme in different parts of India. Objective: (1). To determine the proportion of circulating Rotavirus strains causing acute viral gastroenteritis (AGE) …
Published in Research and Reviews: A Journal of Microbiology and Virology · Vol. 11, Issue 3, 2021 · pp. 6–13 Read article
-
A Review on Solar Multilevel Inverter for the Production of Free Energy Due to the Structure with Long-life Feature
Abstract: Multilevel inverters play a major role in medium voltage, high power and renewable applications. It is also used in certain applications where high switching frequency, and high output voltage gain are required. The switching transient period of a MOSFET should be minimal because a high dv/dt rate could result in permanent damage to the MOSFET. The harmonics present could cause many problems and so it has to be minimized. The …
Published in Journal of Nuclear Engineering & Technology · Vol. 14, Issue 1, 2024 · pp. 13–18 Read article
-
Synthesis and Photoluminescence Dynamics of Europium (III) and Terbium (III) Co-doped of GdSrAl3O7 Color-Tunable Nanophosphors
Abstract: A series of Europium (III) and Terbium (III) co-doped GdSrAl3O7 color-tunable nanophosphors were synthesized by a simplistic, streamlined and self-propagating, urea-assisted solution combustion synthesis process. The structural and luminescence characteristics of synthesized Eu3+/Tb3+ co-doped Gadolinium Strontium Aluminate nanocrystalline phosphors were validated using powder X- ray diffraction (PXRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X- ray analysis (EDAX), and photoluminescence spectra studies. The morphological studies revealed that …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 1069–1082 Read article
-
Mechanical Properties, Viscoelastic and Water Absorption Properties of Biocarbon-Reinforced Composites
Abstract: Biocarbon-reinforced polymer composites have emerged as a sustainable alternative to conventional composites, combining environmental benefits with promising material properties. This study explores the effect of varying biocarbon content (0%, 10%, 20%, and 30% by weight) on the mechanical, viscoelastic, and water absorption properties of a polypropylene (PP) matrix. Tensile strength tests reveal that incorporating 10% biocarbon yields the highest strength at 35 MPa, attributed to enhanced interfacial bonding. However, at …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 145–157 Read article
-
Synthesis, spectroscopic, crystal structure, Hirshfeld surface, computational, and biological investigations on Isophorone derivatives: 3-(3,4-dimethoxystyryl)-5,5-dimethylcyclohex-2-en-1-one
Abstract: FT-IR, 1H NMR, and 13C NMR spectroscopy were among the spectroscopic methods used to synthesize and analyze 3-(3,4-dimethoxystyryl)-5,5-dimethylcyclohex-2-en-1-one, a new isophorone derivative. Single-crystal X-ray diffraction (SCXRD) was used to determine the crystal structure, which showed that the molecule crystallizes in a monoclinic system (space group P121/c1) with packing configurations and intermolecular interactions. To learn more about the non-covalent interactions influencing the crystal packing, Hirshfeld surface analysis was used. In order …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 16, Issue 2, 2025 · pp. 51–69 Read article
-
An Efficient Synthesis of Some Novel Benzo Coumarin Derivatives Under Solvent Conditions from 2-acetyl-benzo[f]chromen-3-one
Abstract: The synthesis of the target compounds began with the preparation of 2-[3-dimethylamino[acryloyl-3H-benzo[f]chromen-3-one. This intermediate was obtained through the reaction of 2-acetylbenzo[f]coumarin-3-one with N,N-dimethylformamide dimethyl acetal [DMFDMA[ under reflux conditions in xylene. The enaminone thus formed was subsequently reacted with 6-aminothiouracil in acetic acid, leading to the formation of 2-thioxo-2,3-dihydro-1H-pyrido[2,3-d]pyrimidin-4-one. This compound served as a pivotal intermediate for the synthesis of a series of pyridotriazolopyrimidinones. These derivatives were synthesized by reacting …
Published in International Journal of Cheminformatics · Vol. 2, Issue 2, 2024 · pp. 33–46 Read article
-
Preparation and characterization of High-performance ZnO/PVB Nanocomposite films for UV-shielding and Optoelectronics
Abstract: Zinc oxide nanoparticles can be incorporated into polymer matrices to create materials for various high-performance engineering applications. In this study, zinc oxide nanoparticles were reinforced at different loadings (0.5, 1.0, 0.5, 1.0, 1.5, and 2.0 wt.%) in polyvinyl butyral matrix to synthesize nanocomposite films using the solution casting method. The impact of zinc oxide nanofiller on the morphology and ultraviolet-shielding performance of polyvinyl butyral nanocomposite films was evaluated using various …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 27, Issue 3, 2025 · pp. 35–53 Read article