Search
1058 articles for “Different Materials”
-
A Study of Macrostructure and Wear Behavior of AL7075-B4C MMC Using DoE Method
Abstract: Metal matrix composites are advanced materials produced by combining two or more constituents. In that the major phase called matrix alloy and the other is, generally, ceramic reinforcement. AA7075- B4C Composites are popular in automotive, aerospace and defense fields because of their high strength-to-weight ratio, wear resistance, etc. Present work is focused on the study of wear behavior of Aluminum 7075 Alloy with B4C composites prepared by using Stir Casting …
Published in Trends in Mechanical Engineering & Technology · Vol. 9, Issue 2, 2019 · pp. 25–32 Read article
-
Mechanical and Sustainable Enhancement of Epoxy Composites using Tamarind Seed Powder
Abstract: The investigation examines how tamarind seed powder affects epoxy-based materials for the development of waste-based useful products. The research examines the mechanical behavior of epoxy resin composites which contain tamarind seed powder in increasing percentages spanning from 10% to 40%. The team utilized the hand layup method to produce the composites which then fulfilled the ASTM guidelines for specimen fabrication for mechanical tests. The study examined fundamental mechanical parameters by …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 797–806 Read article
-
Effect of Isothermal Ageing on Microstructure and Mechanical Behavior of 0.5Cr-0.5Mo-0.2V Low Alloy Steel
Abstract: Cr-Mo-V based low alloy steels are widely used in thermal power plants because of their ability to withstand elevated temperature and high pressure under continuous operation. With ferrite-pearlite and/or ferrite-bainite microstructures, these steels find their applications in boiler tubes, pressure vessels and steam turbines. Being cost effective is one of the important factors, which draws attention of many industrialists towards low alloyed steels over highly alloyed steels with austenitic matrix. …
Published in Journal of Materials & Metallurgical Engineering · Vol. 5, Issue 3, 2015 · pp. 7–14 Read article
-
Recovery of Iron Values from Waste Iron Ore Slime
Abstract: Iron ore slime is a waste material generated after beneficiation of iron ores. Due to limited iron ore resources and fast depleting of high-grade iron ore, iron ore producers are emphasizing on recovery of iron values from iron ore slime. Different beneficiation techniques such as hydrocyclone, Wet High Intensity Magnetic Separator (WHIMS), Dispersion-flocculation, and Flotation are some options to recover the lost iron value from the waste. In the present …
Published in Journal of Materials & Metallurgical Engineering · Vol. 6, Issue 3, 2016 · pp. 25–31 Read article
-
A Review on Extraction of Liquid Fuel from Waste Plastic
Abstract: Liquid fuel is a plastic-based derived fuel. A rapid economic growth and consumption of plastic across globe, it creates a negative impact on environment and affects the human health. The consumption trend of natural fossil fuel and other renewable resources indicating that a resources are depleting after a certain decades. Thus, to find an alternative energy to secure the future demand of world. Waste plastic are attractive way to address …
Published in Journal of Petroleum Engineering & Technology · Vol. 9, Issue 3, 2019 · pp. 34–40 Read article
-
A Review on Process Parameter Optimization of TIG Welding of SS316
Abstract: In this audit paper the creator needs to decide the effect of different welding parameters on the weld dot of SS316 welded joint. In this examination the diverse method is utilized to upgrade the distinctive welding parameters like speed, current, gas stream rate on the quality of the material. The outcome demonstrates that speed is the best variable to have most noteworthy twist quality; and current is utilized to get …
Published in Journal of Production Research & Management · Vol. 5, Issue 3, 2015 · pp. 34–38 Read article
-
Study of Ablation Characteristics Carbon Fiber Reinforced Plastic with Silicon Carbide Pores
Abstract: Significant thermal stress is placed on spacecraft during atmospheric re-entry, primarily due to aerodynamic heating. This intense heat can cause severe material damage threatening the spacecraft's structural integrity. To address this challenge, efforts are focused on improving the ablation resistence of spacecraft components. In this work, carbon fiber reinforced plastic (CFRP) composites containing silicon carbide (SiC) holes are explored as a potential solution for enhancing thermal protection system. Four different …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 617–627 Read article
-
Research Paper on Thermal Comfort Analysis of Tractor Considering Multi-Parameters
Abstract: The main functions of a vehicle cabin are to provide a comfortable and relaxing environment for its operator and to protect them from vibrations, noise, and other adverse influences. Modern agricultural tractor cabins are complicated, high-efficiency systems, and the goal of their development is to reduce their negative influence on the environment. Main factors for thermal comfort are the dry-bulb temperature, relative humidity, surrounding surface temperature, and air motion. A …
Published in Journal of Mechatronics and Automation Read article
-
Development and Characterization of Pseudo-Elastic Ternary Cu-Al-Be Shape Memory Alloy and Its Scope as Shape Memory Hybrid Composites
Abstract: This research investigated the potential of the Cu-11.95Al-0.51Be shape memory alloy (SMA) for vibration damping applications. This specific composition of the alloy was selected to ensure the presence of the austenite phase (ß-phase) and to evaluate the pseudo-elastic (SE) behavior. This research explores the design, fabrication, and characterization of a pseudo-elastic ternary alloy. The key parameters examined in this study were the alloy phase and pseudo-elastic behavior. Other important factors, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 370–385 Read article
-
Analysis of Proposed Diagrid Geometry Using Golden Ratio in Non-linear Regime of Material
Abstract: Lateral loads are critical in the design of high-rise structures. The buildings need to have high stiffness and must be able to resist lateral deformations and torsional rotations without having discomfort to the user. Diagrid structural system is one of the systems used in resisting lateral forces. In this study, diagrid geometry is generated using the ‘Golden Ratio’ concept and used to model 40, 50, and 60 story structures. Two …
Published in Journal of Construction Engineering, Technology & Management · Vol. 11, Issue 2, 2021 · pp. 1–11 Read article
-
Critical Overview: Preparation of Bioplastics Using Different Reinforcement Fillers
Abstract: The widespread use of synthetic plastics poses a significant threat to the environment due to their nonbiodegradable nature and reliance on nonrenewable petrochemical sources. Among these, single-use plastics are of particular concern as they are difficult to recycle efficiently. To mitigate this issue, bioplastics offer a promising alternative, as they are derived from renewable sources and are biodegradable. Bioplastics are produced using natural materials, such as plant, animal, and microbial …
Published in Research & Reviews : Journal of Ecology · Vol. 14, Issue 3, 2025 · pp. 18–28 Read article
-
Fabrication and Characterization of Hybrid Composites Using Natural Fibers Reinforced in HDPE and Optimization of Injection Moulding Process Parameters to Minimize Shrinkage
Abstract: Materials are crucial for advancing human living standards. Over the past 20 years, composite materials have garnered significant attention owing to their unique properties and applications across various sectors. This study outlines the creation and analysis of a novel series of natural fiber-based composites, which incorporate jute, sisal, and hemp as reinforcements, with high-density polyethylene (HDPE) serving as the matrix, and produced through injection moulding. This study examines the effects …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 556–585 Read article
-
Thermal Engineering: Principles, Evolution, and Comparative Analysis with Classical Approaches
Abstract: Thermal engineering is the study of heat transfer, thermodynamics and energy conversion systems. However, through the years it has progressed from classical theories, which relied on empirical correlations, to enhanced computed and nanotechnology based approaches. This paper highlights the principles of thermal engineering, its important systems and latest developments of thermal engineering and provides extensive comparisons between the classical (traditional) methods and the most recent developments or innovations such as …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 4, Issue 2, 2026 Read article
-
Comparative Study of Cardiac Poisons in Ayurvedic and Modern View
Abstract: The concept of Visha is widely used in Ayurveda in different dimensions such as a poisonous drug, synonym of fast acting drugs, anything that creates Vishaada (sadness to mind and body by causing different diseases). Poisons are also used as a constituent in various multidrug formulations. So, it becomes necessary to use this poison judiciously for the benefits of human race. Certain drugs are known for their actions on heart. …
Published in Research and Reviews : A Journal of Ayurvedic Science, Yoga and Naturopathy · Vol. 6, Issue 2, 2019 · pp. 1–6 Read article
-
Characterization and Fabrication of Hybrid Matrix Composites of AZ91E Metal with Distinct Reinforcements of Fly Ash and ZrO2
Abstract: The current work choose the characteristics of (Magnesium composite) AZ91E-ZrO2-Fly ash Hybrid Metal Matrix using the regular analytic system. The chosen materials for this purpose are fly ash and ZrO2 in equivalent load extents, Stir casting uses a vortex technique to produce composite materials. A comprehensive experimental investigation was conducted to assess the performance characteristics of AZ91E-ZrO2-Fly ash during the cold upsetting process. The study involved utilizing AZ91E magnesium alloy …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 Read article
-
Removal of Toxic Metals from Industrial Wastewater by using Natural Adsorbent
Abstract: Heavy metal pollution has become one of the most serious environmental problem nowadays. Numerous investigation have been conducted for removing heavy metals by utilizing agricultural waste which have caught more attraction for its advantages and removal efficiency. Treatment process for removal of toxic metals include Bioadsorption, Precipitation, Ion Exchange, Reverse osmosis, Electrochemical treatment, Membrane Filtration, Evaporation, Flotation, Oxidation. Instead of using commercial materials, we have worked on inexpensive materials such …
Published in Journal of Industrial Safety Engineering · Vol. 7, Issue 2, 2020 · pp. 35–40 Read article
-
Design and Analysis of Universal Pick and Place for Ring Gear
Abstract: Today is the modern-day world, the need for a more economical and safer means of increasing production in the manufacturing industry is vital. Nowadays replace the ‘human-being’ by a simple machine. In automation with the use of control systems and information-technologies reduce direct interaction between man and machine. Automation brings accuracy, precision, and efficiency. Since automation replaces the human-being. The automation is playing an important role to save human efforts …
Published in Journal of Mechatronics and Automation · Vol. 6, Issue 2, 2019 · pp. 18–35 Read article
-
Assessment of Standardization and Quality Control of Saurashtri by Using Ancient and Modern Methods
Abstract: Rasaushadhis are an important part of Ayurvedic treatment. These medicines are one of the tool by which dreadful diseases are eradicated. Genuine and standard medicine can only serve this purpose. Standardization should most preferably be checked for the material which is available in varieties. Sauratri is a drug included in the group of Uparas varga. There are varieties of samples of sauratri available in the market and being used by …
Published in Journal of AYUSH: Ayurveda, Yoga, Unani, Siddha and Homeopathy · Vol. 4, Issue 3, 2015 · pp. 26–32 Read article
-
Numerical Investigation of Ply-by-Ply Failure and Strength Degradation in Composite Laminates Under Transverse Loading
Abstract: This paper represents the failure analysis of composite symmetric and antisymmetric laminate, when laminates were subjected to the transverse loading conditions. The load is uniformly distributed in a transverse direction. The analysis includes failure load and nature of failure by using theories of failure. The ply degradation material model is used to modify and update the properties of failed lamina and upgrades the properties of laminate. Laminate is modelled as …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
AI-Optimized Nano-Silica Reinforced PCM Composites for Predictive Solar-Thermal Energy Storage Networks
Abstract: This study presents an AI-optimized nano-silica reinforced polymer composite phase change material (PCM) for predictive solar-thermal energy storage networks. The proposed composite combines paraffin wax, high-density polyethylene (HDPE), and uniformly dispersed nano-silica particles to improve thermal conductivity, structural stability, leakage resistance, and long-term cycling performance. The composite was fabricated through melt blending and ultrasonication-assisted nanoparticle dispersion, followed by comprehensive morphological, chemical, thermal, and thermophysical characterization using scanning electron microscopy (SEM), …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article