Search
853 articles for “Pressurizing”
-
Graphene for Next Generation Green Electronics-A Sustainable Future
Abstract: The amount of e-waste or electronic waste is increasing worldwide due to the rapid development of the electronics industry and the profound usage of electronic products although it has enormous detrimental effects on the environment and humans. It has become an evolving problem due to a lack of knowledge and infrastructure for e-waste disposal and recovery. Researchers around the world are in search of environment-friendly, sustainable ‘green electronic’ material which …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 12, Issue 3, 2022 · pp. 35–41 Read article
-
Numerical Simulation of Mitigation of Soil Swelling Problem under Communication Tower Using Helical Piles
Abstract: AbstractExpansive soils exhibit significant volume changes with variations in soil moisture content. Expansive soils are often considered as problematic soils. It undergoes large volume changes upon wetting and drying and causes huge damages to the structures resting on it. Numerical modeling was carried out by using PLAXIS 3D-2013 software, in which modeling the soil by using hardening soil model was done. Tower rested on expansive soils are subjected to uplift …
Published in Journal of Geotechnical Engineering · Vol. 4, Issue 3, 2017 · pp. 35–46 Read article
-
PREDICTIVE MODEL TO MONITOR THE TRANSPORT OF URANIUM IN UNCONSOLIDATED PREDOMINANT LATERITIC SOIL FORMATION
Abstract: This paper express the rare of uranium transport in predominant lateritic soil formation, the formation were observed to be unconsolidated in the study environment thus deposit high uranium substance in the area, their migration were influenced by manmade and natural origin activities, but the soil experiences migration rate in linear and fluctuation phase in there transport process, the study explain the rate of pressure from void ratio and it low …
Published in Journal of Geotechnical Engineering · Vol. 6, Issue 1, 2019 · pp. 31–39 Read article
-
Soft Computing Based Prediction of Deviator Stress of Waste Plastic Reinforced Sand
Abstract: In the recent past, the soft computing techniques have received a significant attention for solution of the geotechnical stability problems. Following the trend, the present study tries to explore the use of different soft computing techniques such as random forest regression, support vector machines (SVM) RBF kernel, SVM poly kernel and M5P model tree for the prediction of deviator stress of sand reinforced with waste plastic strips. The deviator stress …
Published in Journal of Geotechnical Engineering · Vol. 6, Issue 3, 2019 · pp. 1–7 Read article
-
Estimation of Pile Deviation at Slope Using Finite Element Method
Abstract: This paper presents results and discussion of the pile deviation, which occurred during slope construction at the Depot LRT Kampung Kuala Sungai Baru (KKSB) Ampang Line Extension Project. The piles at RW5 slope area deviated for almost 1 m from its original location which caused tremendous cost impact to mitigate and was time consuming. An investigation was carried out by referring to the Geotechnical Assessment Report and the simulation work …
Published in Journal of Geotechnical Engineering · Vol. 3, Issue 3, 2016 · pp. 7–15 Read article
-
Dynamic Behavior of Coal Ash
Abstract: Coal ash is deposited in large quantities in the ash pond. It is used as structural fill and for dyke construction. The behavior of ash under dynamic conditions is not well investigated. The present work attempts to quantify some of the parameters, which influences the dynamic stability especially liquefaction potential of coal ash. Several investigations conducted on coal ash suggest that ash fills have low SPT value. This supports the …
Published in Journal of Geotechnical Engineering · Vol. 1, Issue 2, 2014 · pp. 7–11 Read article
-
Slope Stability Problem in the Chittagong City, Bangladesh
Abstract: Chittagong, the major port city of Bangladesh is seriously and violently vulnerable for landslide from geological and geographical point of view for many specific reasons. Along with the steep slope, slope cutting, natural weathering and antecedent rainfall causes for landslide of the city during the rainy season caused by thunderclap of heavy storms. This paper presents a quantitative analysis of slope instability problem of the Chittagong city by technical and …
Published in Journal of Geotechnical Engineering · Vol. 1, Issue 3, 2014 · pp. 13–25 Read article
-
Efficacy of Strain Wedge Method Against Traditional p-y Method for Analysis of Piles Subjected to Different Load and Soil Condition: A Review
Abstract: Pile foundation plays a major role in design of structures as its lateral response dominates the design subjected to lateral loads. These loads acting on foundations may be sustained from traffic loading on a bridge pier or earth pressure in a retaining wall. As soil reaction and pile deflection affect each other for a lateral load, this becomes a very complex soil-structure interaction problem. There are many approaches or methods …
Published in Journal of Geotechnical Engineering · Vol. 10, Issue 2, 2023 · pp. 1–12 Read article
-
Musculoskeletal disorder and psychosocial work demands in Insurance industry: A case study
Abstract: ABSTRACTIntroduction- Insurance sector is a group of professionals who perform under time pressure. The use of computer increases in the insurance industry which is linked with musculoskeletal pain. The objective of the study is to analyze the prevalence of MS pain during past 12 months and to correlate it with these work related factors. Methods- Insurance office workers from various companies in Punjab responded to the questionnaire which is related …
Published in Journal of Industrial Safety Engineering · Vol. 4, Issue 3, 2017 · pp. 37–42 Read article
-
Consequence Analysis, Vulnerability Mapping and Fuzzy Fault Tree Analysis for a Better Disaster Management in and Around Chemical Industrial Areas
Abstract: Chemical industries are prone to hazards like fire, explosion and toxic gas releases. Qualitative and quantitative hazard analyses are essential for the identification and quantification of the hazards associated with chemical industries. This study presents the results of a consequence analysis carried out to assess the damage potential of the hazardous material storages in an industrial area of central Kerala, India. These results are used for the estimation of individual …
Published in Journal of Industrial Safety Engineering · Vol. 1, Issue 1, 2014 · pp. 12–18 Read article
-
Comparison of Hazard Potential of LPG Handling Units in GCU using Consequence Analysis
Abstract: The scope of this work was to quantitatively assess the risks involved in a section of a chemical process plant where LPG is produced using various consequence analysis models. The Gas Concentration Unit (GCU) was considered for the analysis as it produces a major portion of the LPG in a Petroleum Refinery. The Debutanizer, Stripper and HP (high pressure) Receiver, the three units which handle LPG, were considered for consequence …
Published in Journal of Industrial Safety Engineering · Vol. 2, Issue 3, 2015 · pp. 34–48 Read article
-
Design and Working of Solar Sprayer Pump for Agriculture
Abstract: The energy crisis fuel, resources depletion and, pollution these three are the major challenges in front of today’s world. The green energy generation from the existence resources is the new thought and which become possible by using non-conventional energy sources and one the option out of solar, wind and bio mass is Solar energy which can be easily converted in electricity using a new concept. Solar sprayer is a perfect …
Published in Journal of Industrial Safety Engineering · Vol. 7, Issue 2, 2020 · pp. 1–4 Read article
-
A Simulation Model to Predict the Performance of Ethanol- Gasoline Blend (E15) in a Spark Ignition Engine
Abstract: Usage of biofuels like bio-ethanol as a fuel in IC Engines is becoming prominent day by day due to their positive characteristics like biodegradability, nonpolluting, renewability, homegrown etc. Conducting experiments on real engine to establish the suitability of biofuels to IC Engines is very time consuming and expensive. Computer based simulation helps in addressing these problems. In this work an attempt is made to simulate performance and emission of SI …
Published in Journal of Industrial Safety Engineering · Vol. 7, Issue 3, 2020 · pp. 13–22 Read article
-
Design, Fabrication and Testing of Safety Valve Vent Silencer with Cyclone Separator for Industrial Applications
Abstract: The aim of this research work is to safeguard the infill materials, which is used inside the safety valve vent silencer. This research will help the infill materials from the wet steam and increases the life of the infill materials. The main parts of the research project are the cyclone chamber, center pipe. This cyclone separator drains the condensate through the lower part of the silencer and the steam releases …
Published in Journal of Industrial Safety Engineering · Vol. 8, Issue 1, 2021 · pp. 22–27 Read article
-
Review on Main Equations for Measuring Spray Properties in Centrifugal Injectors
Abstract: The method of fuel injection has a significant effect on the stability and proper mixing of fuel and oxidizer, which is done by the injector. In other words, the injector is a device that converts fluid into droplets. The faster and better the particle crushing rate, the faster the fluid particles will evaporate, resulting in higher thermal efficiency and higher thrust force. Therefore, how to inject fuel into the combustion …
Published in Journal of Industrial Safety Engineering · Vol. 8, Issue 3, 2021 · pp. 17–23 Read article
-
Risk Assessment in Boiler Operations by HAZOP
Abstract: Our motive in this study is to analyze the hazard associated in different processes which are being carried out in the boiler room and to minimize their effects in order to make the working environment safe. Boilers are generally used to convert heat energy produced by burning of fossil fuel to the electric energy. This review presents hazard analysis of boilers, improves the safety performance related to boiler by using …
Published in Journal of Industrial Safety Engineering · Vol. 9, Issue 3, 2022 · pp. 31–36 Read article
-
Design and Analysis of Water Spray System for Vertical Storage Vessels-Floating Roof Tank for Industrial Safety
Abstract: Large-scale tank fires are a rare occurrence, but they pose a significant challenge to firefighters, oil companies, and the environment. Two options exist for dealing with such fires: letting them burn out on their own or actively attempting to extinguish them. Water spray systems are an effective method for extinguishing fires or providing a cooling effect, particularly on storage tanks. This study presents a designing and analysis of water spray …
Published in Journal of Industrial Safety Engineering · Vol. 9, Issue 3, 2022 · pp. 26–30 Read article
-
A study on the levels of noise pollution in Indore City, India, using pollution indices
Abstract: The purpose of this study was to investigate the patterns of environmental noise levels in the communities surrounding Indore City. The escalation of industrialization, urbanization, and transportation systems has led to a widespread problem of noise pollution in urban areas across the globe, which in turn has a significant impact on the overall quality of life. The issue of noise pollution has gained considerable attention as it has become a …
Published in Journal of Industrial Safety Engineering · Vol. 10, Issue 1, 2023 · pp. 8–12 Read article
-
Smart Helmet for Two Wheelers
Abstract: AbstractWhen a person is involved in a high speed accident; it becomes very fatal if the driver does not wear a helmet. A helmet thereby saves a person from shocks due to impact during accident. Prevention of accidents can be done by implementing strict laws and regulations. Entire world is united in this issue of road safety and there have been various improvements in this field so far. A smart …
Published in Journal of Instrumentation Technology & Innovations · Vol. 10, Issue 1, 2020 · pp. 24–29 Read article
-
Optimization of Process Parameters in Wire EDM of HCHCrD2 using RSM-based Multi-objective Genetic Algorithm
Abstract: While precision is of paramount importance in machining of high strength conductive materials, Wire Electrical Discharge Machining (WEDM) is preferred. In the present work, experimental study has been carried to identify the appropriate process parameter settings for wire electrical discharge machining of high carbon high chromium D2 steel (HCHCrD2). The process parameters such as pulse peak current, pulse duration, pulse-off time, wire feed, wire tension and flushing pressure are considered. …
Published in Journal of Mechatronics and Automation · Vol. 5, Issue 1, 2018 · pp. 6–10 Read article