Search
1508 articles for “surface”
-
Effect of Temperature on Inhibitory Efficacy of Tamarindus indica fruit extract on acid corrosion of Aluminium
Abstract: An attempt has been made to investigate the anti-corrosive propensity of ethanolic extract of Tamarindus indica fruit at elevated temperature between 303 to 343 K, so as to replace the exploitation of toxic chemicals as corrosion inhibitors. Inhibition efficiency has been observed significantly high (84.06%) at room temperature at concentration 0.45 %. The inhibition efficiency is found to increase with increasing concentration of extract and decrease with rise in temperature. …
Published in Recent Trends in Fluid Mechanics · Vol. 10, Issue 3, 2023 · pp. 42–50 Read article
-
Design and Thermal Analysis of Fins for Air Cooled Engine by Varying its Geometry
Abstract: An air-cooled motorcycle engine releases heat to the atmosphere through the mode of convection to facilitate this, fins are provided on the outer surface of the cylinder. The cooling fins allow the wind to move the heat away from the engine. The heat transfer rate depends upon the velocity of the vehicle, fin geometry and the ambient temperature. Low rate of heat transfer through fins is the main problem of …
Published in Trends in Machine design · Vol. 5, Issue 3, 2018 · pp. 37–53 Read article
-
Passive Capillary Flow of Red Dye in the SU-8 based Glass Microfluidic Devices
Abstract: In this work, total three individual SU-8 based glass microfluidic devices are fabricated by the maskless lithography and indirect bonding technique. Commercially available red coloured food dye is used as working liquid. Individual surface-driven capillary flows of red dye are recorded by the CMOS camera. This work will be useful in bioengineering applications.
Published in Trends in Mechanical Engineering & Technology · Vol. 8, Issue 3, 2018 · pp. 59–61 Read article
-
Multi Objective Optimization in Micromilling of 304L steel by Taguchi-Grey-Fuzzy Method: Literature Review
Abstract: Micromechanical milling of 304L Stainless steel which is commonly used in the welded in severe corrosion environment and it terminates the need for annealing. The goal of this study is to investigate the influence of process input parameter such as cutting speed, depth of cut, feed per tooth, radial immersion percentage and plunging method on process output during circular pocketing operations. Tool wear, machining forces and surface roughness measurement are …
Published in Trends in Mechanical Engineering & Technology · Vol. 10, Issue 2, 2020 · pp. 25–30 Read article
-
Suitability of Additive Manufacturing Process in Optical Lens Production
Abstract: Additive Manufacturing is one of the non-conventional methods of manufacturing that is gaining immense popularity for its ease to manufacture customized parts. The lenses have always been manufactured using a continuous process of Blanking, Surface generation, Edging and Centering, Grinding, Polishing, and Coating. But the conventional processes demand large inventories and more time. Customization of lenses may also be possible if a process like Additive Manufacturing is implemented. Also, the …
Published in Trends in Mechanical Engineering & Technology · Vol. 11, Issue 3, 2021 · pp. 39–46 Read article
-
Improved Performance Characteristics of a Designed 1050 nm Bottom Emitting MQW VCSEL using Al0.25Ga0.22In0.53As/InP Materials
Abstract: AbstractIn this work, the design and performance characteristics of a bottom emitting Al0.25Ga0.22In0.53As/InP Multi-Quantum Well (MQW) Vertical-Cavity Surface-Emitting Lasers (VCSEL) have been presented for operation at a wavelength of 1050 nm. The transparency carrier density and bandgap energy of the QW and barrier materials are computed. An improved performance of the designed VCSEL has been obtained by selecting a material with high gain and lower transparency carrier density in the …
Published in Trends in Opto-electro & Optical Communication · Vol. 3, Issue 3, 2013 · pp. 22–30 Read article
-
Optimization of Performance Characteristics of Rail Wheel Profiling using Taguchi with ANOVA
Abstract: Optimization is the process or technique to approach the best output goal, which is necessary, that the production of the industries at the best quality in minimum total input cost and maximize the profit. So there are many optimization methods, one of them is Taguchi method. The outline of the paper, the optimization approach based on Taguchi method, which is to optimize the cutting parameter in under grounded CNC Turning …
Published in Trends in Transport Engineering and Applications · Vol. 2, Issue 1, 2015 · pp. 25–38 Read article
-
Finite Element Modeling of Asphalt Concrete Pavement Reinforced with Geogrid by Using 3-D PLAXIS Software
Abstract: This paper presents an axisymmetric finite element (FE) model to analyze the behavior of unreinforced and geogrid reinforced asphalt concrete pavement subjected to various tire pressures. The model was loaded with an incremental loading from 100 to 600 kPa with 50 kPa increment and the critical pavement responses such as total stress and vertical surface deflection were determined for unreinforced and geogrid reinforced flexible pavement. The results indicated that during …
Published in Trends in Transport Engineering and Applications · Vol. 3, Issue 1, 2016 · pp. 12–20 Read article
-
Assessing the Durability of Stone Matrix Asphalt Concrete
Abstract: Stone Mastic Asphalt (SMA) is widely used throughout the world as one of the preferred asphalt surfacings. The local specifications define asphalt concrete durability based on maximum loads at failure. Therefore, it is required to assess the durability of the road surface materials of SMA and their ability to resist operational effects in terms of environmental impact. In this investigation, the durability of stone matrix asphalt concrete was assessed in …
Published in Trends in Transport Engineering and Applications · Vol. 6, Issue 3, 2019 · pp. 1–8 Read article
-
Image Preprocessing Techniques
Abstract: ABSTRACTPreprocessing method is an important step, specifically for low-quality picture images. This method is robust to lighting variations and produces images with very little noise and consistent stroke width. The process computes a “surface” of background intensities at every point in the image that performs adaptive thresholding based on this result. The surface is estimated by identifying regions of low resolution text and interpolating neighboring background intensities into these regions. …
Published in Journal of Computer Technology & Applications · Vol. 3, Issue 2, 2012 · pp. 20–29 Read article
-
Real-world Pothole Detection Using Image Processing and Deep Learning Convolutional Neural Network Model
Abstract: Potholes are a major problem of concern in many parts of the cities across the country. Road accidents are one of the causes that significantly affect humanity and result in damage to vehicles and road surface. Potholes are dangerous for pedestrians who walk along the road and vehicular traffic on busy roads. Road accidents are caused due to improper maintenance of roads, and it is imperative to attend to such …
Published in Journal of Computer Technology & Applications · Vol. 14, Issue 3, 2023 · pp. 95–103 Read article
-
Modernized Art for a Smarter Environment
Abstract: Gesture recognition is a technology that uses the mathematical algorithms to identify human gestures. Gesture recognition recognizes the hand, tracks its movements, and provides information about hand position, orientation, and finger flux. This research work describes a sophisticated and user-friendly Human Computer Interaction (HCI) technology that employs the Raspberry Pi to easily translate user intentions into corresponding commands and output. The proposed system overcomes the disadvantages present in the existing …
Published in Research & Reviews: A Journal of Embedded System & Applications · Vol. 10, Issue 1, 2022 · pp. 7–14 Read article
-
Phytochemical, Pharmacological and Unani Traditional Uses of Mazoo (Quercus infectoria): A Review
Abstract: Quercus infectoria (Family: Fagaceae) generally recognized as gall oak, is a trifling shrub originate in Greece, Asia Minor and Iran is predictably assumed to have enormous therapeutic status. There are two varieties of mazoo; one is solid type with no hole on its surface and another is light weighted hold cavity inside and hole on its surface but solid type is medicinally better. Pharmacologically, various animal and human studies have …
Published in Journal of AYUSH: Ayurveda, Yoga, Unani, Siddha and Homeopathy · Vol. 9, Issue 1, 2020 Read article
-
A Study on Efficacy of Movement with Mobilization Versus Graded Oscillatory Technique in the Management of Pain and Shoulder Function Among Shoulder Impingement Subjects
Abstract: Many conditions affecting shoulder which includes rotator cuff tear, frozen shoulder, shoulder instability, bursitis and shoulder impingement. Impingement usually refers to compression and mechanical aberration of the rotator cuff tendon, subacromial bursa, or long head of biceps tendon beneath the anterior under surface of the acromion, coracoacromial ligament or under surface of the acromioclavicular joint during elevation of arm. Another possible mechanism of impinge can be attributed to intrinsic breakdown …
Published in Research and Reviews : Journal of Computational Biology · Vol. 6, Issue 3, 2017 · pp. 20–35 Read article
-
An Update on the Virulence Factors of Actinobacillus Actinomycetemcomitans A Systematic Review
Abstract: Over the last 20 years, research on Actinobacillus actinomycetemcomitans (Aa) a periodontopathogen, has provided a tremendous amount of information as a major anaerobic, opportunistic pathogen. Elucidation of the virulence in Aa is especially difficult because of this bacteri pathogenicity being multifaceted, including both microbial and host factors and the inability to clearly define the disease state of many forms of destructive periodontal disease. The objectives of this study were to …
Published in Research and Reviews: A Journal of Dentistry · Vol. 2, Issue 1-3, 2011 · pp. 5–13 Read article
-
In-vitro assessment of plant growth promoting traits integrated with antagonistic activity of biosurfactant producing Bacillus species of oil contaminated soil
Abstract: Researchers are in search of microbial tools having plant growth promoting activity integrated to biosurfactant production potential to develop eco-friendly technique for sustainable agricultural. Presented study was undertaken to characterize the plant growth promoting activity of biosurfactant producing Bacillus species isolated from oil contaminated soil. Bacterial strains were identified as Bacillus licheniformis P1 and Bacillus velezensis P2, on the basis of morphological, biochemical and 16SrDNA gene sequence homology. Biosurfactant producing …
Published in Research and Reviews: A Journal of Microbiology and Virology · Vol. 12, Issue 3, 2022 · pp. 30–34 Read article
-
Improvement of Motor and Sensory–Motor Behaviors after the Human Amniotic Epithelial Cells Transplantation in 6-OHDA Lesioned Corpus Striatum of Wistar Albino Rats
Abstract: Deficits in apomorphine-induced rotation and rotarod in rat have been proposed as a nondrug-induced model of the akinesia associated with the Parkinson’s disease. In the present study, we examined the disabilities in the rotarod and apomorphine-induced rotations have been observed after the 6-hydroxydopamine-induced denervation in the striatum. These impaired activities have reversed after the Human Amniotic Epithelial (HAE) cells transplantation during long-term observation. The neuronal densities and diameter were reduced …
Published in Research and Reviews: A Journal of Neuroscience · Vol. 4, Issue 2, 2014 · pp. 34–45 Read article
-
Exposure of Nanoparticle Leads to Health Hazards
Abstract: Nanotechnology is a technique used for the production of materials of the nanoscale level. This is a new development in technology which usually entails some hazards as well as advantage to society. Thus nanomaterials are well known for their various beneficial uses in the medicines, engineering, computer, etc., in spite of that it is associated with many hazards related to human health. The exposure of nanomaterials through dermal contact, inhalation, …
Published in Research and Reviews: A Journal of Toxicology · Vol. 9, Issue 3, 2019 · pp. 7–18 Read article
-
Qualitative Analysis of River Water of Rewa City, Madhya Pradesh: A Review
Abstract: Water is one of the requisite resources for the survival of organisms on the earth. It is not possible for life to function without water. Water is considered as the universal solvent. Since water sustains life therefore regular management, conservation and qualitative analysis of water is necessary. There are various sources of water out of which main sources are surface water, underground water, rain water and sea water. Surface water …
Published in Research and Reviews: A Journal of Toxicology · Vol. 10, Issue 2, 2020 · pp. 40–45 Read article
-
Role of Hijama (Cupping) in the Management of Various Diseases and Probable Mechanism of Action
Abstract: Hijama is derived from Arabic word ‘Hajm’ which literally means to suck. It involves the use of cup like vessels placed on the body surface by creating a vacuum to either let out blood from below the skin surface or just plain suction without bloodletting. Hijama evacuates blood from small vessels spread over the skin and muscles and relieves congestion from the body. It is a therapy with low cost …
Published in Research & Reviews : A Journal of Unani, Siddha and Homeopathy · Vol. 5, Issue 2, 2018 · pp. 19–23 Read article