Search
82 articles for “sodium”
-
Structural Modification of Sugarcane Bagasse using Alkaline, Acid, and Bleaching Pretreatments for Enhanced Yield of Poly (1→4)-β-D-glucopyranose (Cellulose) and Hemicellulose for Utilization as Biocomposites
Abstract: Sugarcane bagasse, a lignocellulosic byproduct generated in substantial quantities by the sugar industry, represents a promising feedstock for the sustainable production of enzymes and bio-based chemicals. Its high (1→4)-β-D-glucopyranose (cellulose) content, abundant availability, and low cost make it an ideal candidate for bioconversion processes. However, the inherent recalcitrance of bagasse, primarily due to its lignin-rich matrix, necessitates effective pretreatment strategies to enhance enzymatic digestibility. This study presents a comparative investigation …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 983–992 Read article
-
Caries-Preventive Effects of Self-Applied Subacidic 0.5% NaF-HF Gel via Toothbrushing in 7–8-Year-Old Schoolchildren: A Randomized Controlled Clinical Trial
Abstract: To assess the caries-preventive effectiveness of self-applied subacidic 0.5% sodium fluoride–hydrofluoric acid (NaF-HF) gel used during toothbrushing in children aged 7–8 years Objective: To assess the caries-preventive effectiveness of self-applied subacidic 0.5% sodium fluoride–hydrofluoric acid (NaF-HF) gel used during toothbrushing in children aged 7–8 years. Methods: This 1-year, multi-arm, double-blind, placebo-controlled, parallel-group randomized study evaluated the caries-preventive efficacy of self-applied 0.5% NaF-HF gel among primary schoolchildren. A total of 1200 …
Published in Research and Reviews: A Journal of Dentistry · Vol. 17, Issue 1, 2026 · pp. 14–19 Read article
-
Study of pH Behaviour of Slurry on Surface Morphology of Copper Material with Single Pole Magnetic Abrasive Finishing Process
Abstract: The chemical oxidizers—sodium hydroxide, Marshall’s acid salt, and hydrogen peroxide—were effectively employed in the wet polishing of copper using the SPMAF experimental setup. The manuscript explores preparation of slurry used for polishing copper material using single pole magnetic abrasive finishing (SPMAF) framework. The slurry contains distilled water, 1200-grit aluminum oxide abrasives, sodium hydroxide (NaOH), potassium persulfate (K₂S₂O₈), and hydrogen peroxide (H₂O₂), combined in precise amount. Specifically, 100 ml of distilled …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1887–1896 Read article
-
Development and Performance Evaluation of Polymer-Modified Geopolymer Composites Incorporating GGBS
Abstract: This research investigates the development and performance of geopolymer-based composite materials formulated using Ground Granulated Blast Furnace Slag (GGBS) as a reactive mineral component within an aluminosilicate polymer matrix. The study aims to create an eco-efficient and structurally sound inorganic polymer composite comparable to M35-grade concrete, produced entirely under ambient curing conditions. A series of mixes with varying GGBS replacement ratios (0–100%) was prepared, maintaining a constant binder content of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1145–1165 Read article
-
Synthesis and Evaluation of New Coumarin Derivatives for Inflammatory Bowel Disease Against DSS-Induced Acute Ulcerative Colitis Mice Model
Abstract: Objective: The discovery of the now numerous mouse models of intestinal inflammation has increased our understanding of the intestinal inflammation that occurs in inflammatory bowel disorders (IBD). This study aimed to investigate the use of a standardized animal model subjected to coumarin derivative treatment, and the action of synthesized molecule administration of dextran sodium sulphate (DSS)- induced colitis in experimental mice. Materials and Methods: We generated a variety of unique …
Published in Journal of Modern Chemistry & Chemical Technology Read article
-
Assessment of Groundwater Quality in Rumuodara, Rivers State, Nigeria
Abstract: The assessment of groundwater quality from selected borehole in Rumuodara, Rivers State, Nigeria was evaluated. The results of the physicochemical parameters revealed that pH ranged from 6.57-6.60, temperature: 26.10-28.54oC, turbidity: 1.57-2.96NTU, conductivity: 41.24-68.44 μS/cm, salinity: 26.10-50.37mg/l, total dissolved solid: 18.9-63.14mg/l, total hardness: 38.21-48.30mg/l, alkalinity: 55.30-70.17mg/l, chloride: 28.40-75.14mg/l, sulphate: 21.50-30.60mg/l, nitrate: 1.50-3.04mg/l, phosphate: 59.24-65.40mg/l, calcium: 37.81-45.27mg/l, Iron: 0.133-0.190mg/l, sodium: 16.70- 21.13mg/l, copper: 0.22–0.50mg/l, total suspended solid: 2.94-3.60mg/l, Lead: < 0.01mg/l-2.27mg/l, zinc: …
Published in Research & Reviews : Journal of Ecology Read article
-
Dynamic deformation and microstructural characteristics of AA5083 under the influence of electrochemical behaviour using equal channel angular pressing
Abstract: Large-scale Equal channel angular pressing is a great engineering material that has more potential for AA5083 industrial applications. Uniaxial dynamic compressive tests across a temperature of 448 K were conducted for the ECAP technique AA5083 in order to create such a design framework. The microstructure was described using transmission electron microscopy and scanning electron microscope both before and after dynamic loading. The plastic flow behaviour of the AA5083 was described …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 95–112 Read article
-
Development of Shelf-stable Oral Rehydration Drink with Whey and Red seaweed (Kappaphycus alvarezii)
Abstract: The present study aimed at developing a whey based oral rehydration drink (ORD) incorporated with red seaweed. The ORD was formulated with seaweed, sodium chloride, potassium chloride and sugar at the concentrations of 1.0 w/v%, 0.20 w/v%, 0.075 w/v% and 15 w/v% respectively and a whey:water ratio of 1:1.5. The ORD with 1.0 w/v% seaweed obtained the highest overall sensorial acceptability. This drink was further subjected to storage study for …
Published in Research and Reviews : Journal of Dairy Science and Technology · Vol. 13, Issue 1, 2024 · pp. 20–27 Read article
-
Development of Novel Materials with Photocatalytic Effect
Abstract: For capturing solar energy and for converting it into electric power, it is utmost essential to design materials that can be used for this purpose. Generally, the materials deployed for converting solar energy into electric energy are sensitive to UV-radiation. If the material used for this purpose are sensitive to visible light, it will be the breakthrough research. It has been a challenge to design materials with novelty of being …
Published in International Journal of Photochemistry and Photochemical Research · Vol. 1, Issue 2, 2023 · pp. 25–39 Read article
-
Gryllusbimaculatus De Geer, 1773 in the Temperate forest of Sikkim Himalayan region
Abstract: Gryllusbimaculatus De Geer, 1773 is the one of the subtropical and tropical species which is distributed in the different parts of the world. It is used as the live food for many amphibians and reptiles. Certainly, its nutritional data also attracted many farm developers and researchers. It has several essential composition where15 g of its powder contains cholesterol (35mg), sodium (55mg), total carbohydrate ( <1g), dietary fiber ( <1g), protein …
Published in Research and Reviews : Journal of Veterinary Science and Technology · Vol. 13, Issue 2, 2024 · pp. 14–17 Read article
-
Gelatin-EiO2 (Ei = Si/Ti/Zr) Based Mesoporous Nano-hybrids: Synthesis and Characterization
Abstract: The hybrid materials are mostly prepared by combining the organic or bio-organic part to the inorganic building blocks and are used in many applications. Gelatin as one of the main component of hybrid materials is an attractive option. It is biodegradable; biocompatible; non-toxic; bio-adhesive and contains many active groups such as –NH2, –COOH, in the biopolymer backbone makes these hybrid materials important in various technological applications. The synthesis of a …
Published in Journal of Materials & Metallurgical Engineering · Vol. 14, Issue 3, 2024 · pp. 30–58 Read article
-
Synthesis, Characterization, and Reactivity of Bivalent Tin(II) with 4-Tert-butylphenol
Abstract: Bivalent tin(II)-4-tert. butylphenoxide of composition Sn(OC6H4X-4)2(I), where X = But, has been synthesized by the reaction of stannous chloride (SnCl2) with bimolar amounts of 4-tert. butyl phenol (HOC6H4But-4) in the presence of the base, diethyl amine, in tetrahydrofuran (THF) solvent. The resulting complex was characterized by elemental analysis, molecular weight determination, molar conductance measurement, IR, and 1H NMR spectral studies. The reactivity of the newly synthesized complex (I) with HgCl2 …
Published in International Journal of Photochemistry and Photochemical Research · Vol. 2, Issue 1, 2024 · pp. 14–19 Read article
-
Study of the Properties and Destructibility of the Native and Cross-Linked Potato Starch-Filled Polymer Composites for Food Packaging Applications
Abstract: Plastic is a vital component of modern life, commonly used in daily food packaging for its convenience and durability. Plastic marketing bags are manufactured from low-density polythene (LDPE) which causes ecological inconvenience as most of the plastic components are stored in waste and underground conditions for an elongated time. Plastic is a synthetic or semi-synthetic material that does not decompose naturally, and its primary drawback is its environmental impact, prompting …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 14, Issue 3, 2024 · pp. 12–23 Read article
-
Evaluation of Polysaccharide-Based Membranes for Transdermal Drug Delivery in Chronic Pain Management
Abstract: In order to improve treatment effectiveness and patient compliance, chronic pain management is still a major challenge in modern healthcare, requiring creative medication delivery methods. The potential of polysaccharide-based membranes for transdermal drug delivery is assessed in this work, with particular attention to chitosan, alginate, and hydroxypropyl methylcellulose (HPMC). Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) were two characterization techniques used to assess the membranes' physical and chemical …
Published in International Journal of Membranes · Vol. 1, Issue 2, 2024 · pp. 28–38 Read article
-
A comprehensive study on elemental analysis and sustainable integration of CETP (common effluent treatment plant) sludge as a substitute to sand in concrete
Abstract: This study examines the utilization of sludge from common effluent treatment plants (CETP) as a fractional substitute for sand in M20 concrete mixtures. Its aim is to address disposal challenges associated with CETP sludge while promoting sustainable use of natural resources. The research assesses the structural and microstructural attributes of concrete mixes containing varying percentages of CETP sludge (0%, 10%, 20%, 30%, 40%, and 50%). Tests conducted include compressive, flexural, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 49–59 Read article
-
Use of Coconut Fibre as a Suitable pH and Rheology Enhancer
Abstract: This paper studied the use of coconut fibre as a substitute for caustic soda in drilling fluids for the improvement of pH in a water-based mud. The coconut coir was dried in the sun for 7 hours and ground into very fine particles, after which it was placed in an electronic oven at a temperature of 105°C for 1 hour to remove any remaining moisture. Sieving using a 200 mm …
Published in Journal of Petroleum Engineering & Technology · Vol. 14, Issue 3, 2024 · pp. 01–10 Read article
-
Physico-Chemical Assessment of River Benue to Determine Pollution Levels Using Chemometric Models.
Abstract: The effects of pollution on water have been reviewed. This study is aimed at determining the level of pollution of the River Benue, with the view of assessing its use as potable water. Different analytical techniques including titrimetry, gravimetry, potentiometry, and spectrophotometry were used for the study. The total hardness gave (22.28 mg/L and 41.87 mg/L) for dry and rainy season respectively. Electrical conductivity gave (91.35 mg/L and 54.10 mg/L) …
Published in International Journal of Pollution: Prevention & Control · Vol. 2, Issue 2, 2024 · pp. 43–76 Read article
-
Boron minerals: geological distribution, economic significance, and applications
Abstract: Boron (B), a critical micronutrient, plays a vital role in various biological and industrial processes. This study provides a comprehensive review of the main boron minerals, including borax (sodium borate), kernite, colemanite, and ulexite, with a focus on their geological distribution, particularly in the Mojave Desert. These minerals serve as significant sources of boron, with tincal and rasorite emerging as key contributors to global reserves. Notably, the estimated global reserves …
Published in Research & Reviews : Journal of Agricultural Science and Technology · Vol. 14, Issue 1, 2025 · pp. 6–10 Read article
-
Overview of Atomic Structure of Metals in Group 1 Elements
Abstract: This study discussed the basic atomic features of Group 1 elements—lithium, sodium, potassium, rubidium, cesium, and francium—by concentrating on their electronic configurations, atomic radii, and ionization energies. The article gives a thorough investigation of how these variables contribute to the chemical and physical characteristics of alkali metals. The data demonstrated that when the atomic number increases, the atomic radius likewise increases, whereas the ionization energy drops. These developments are ascribed …
Published in Journal of Materials & Metallurgical Engineering · Vol. 14, Issue 3, 2024 · pp. 6–13 Read article
-
Evaluation of the Emission and Engine Operability of Biodiesel and Biodiesel Blends Produced from Alkali-Catalyzed Esterification and Transesterification of Jatropha Oil Feedstock
Abstract: This study reports on the engine performance analysis of biodiesel and blends produced from jatropha-based bio-oil feedstock via combined esterification and transesterification process, the physiochemical of the bio-oil, and subsequent biodiesel produced. Jatropha bio-oil was characterized to determine its fuel properties. A liquid phase transesterification reaction at 60 min reaction time, 50°C temperature, using a methanol-oil molar ratio of 40:1 and 0.35 g of sodium hydroxide (NaOH) catalyst was carried …
Published in Journal of Petroleum Engineering & Technology · Vol. 15, Issue 1, 2025 · pp. 9–21 Read article