Search
74 articles for “optimum performance”
-
The Effect of Quicklime on The CBR Value of Soft Soil Stabilized with Nickel Slag and Aluminium Hydroxide
Abstract: The construction of road structures on soft soils is prone to structural damage due to the low bearing capacity of the soil under the load imposed by vehicles. Chemical stabilization is a popular method used to increase the bearing capacity of soft soils. This study aims to examine the effectiveness of soft soil stabilization using a mixture of lime, nickel slag, and aluminium hydroxide to enhance soil bearing capacity. The …
Published in Journal of Geotechnical Engineering · Vol. 12, Issue 1, 2025 · pp. 1–8 Read article
-
Optimization of Liquid Metal Nanocomposites and Biogas Addition Rate Using ANN-GA
Abstract: In this study, the liquid metal nanocomposites were investigated using artificial neural network (ANN) prediction capabilities for Compression Ignition (CI) engine performance. The independent input variables selected were load (20-100%), Liquid-metal nanocomposites Doped Rate (NDR, 0-50 ppm), and Biogas Flow Rate (BFR, 0.5-1.0 kg/h). The Central Composite Face-Centered Design (CCFCD) was used in conjunction with the selected input variables and output parameters to assist in the preparation of the Design …
Published in Journal of Polymer & Composites · Vol. 11, Issue 11, 2023 · pp. 12–27 Read article
-
Engine Performance Analysis of Cottonseed Based Biodiesel Using Design Expert Statistical Based Tool
Abstract: Biodiesel is a biofuel acquired by substance forms from vegetable oils or creature fats and liquor that can be utilized in diesel engines alone or mixed with diesel oil. It is characterized as the mono-alkyl esters of unsaturated fats got from vegetable oils or creature fats. In basic words biodiesel is the item that gotten when vegetable oil or creature fat is artificially responded with a liquor to deliver unsaturated …
Published in International Journal of Industrial and Product Design Engineering · Vol. 1, Issue 1, 2023 · pp. 1–5 Read article
-
Red Earth Development of a Soil-Based Composite Using Bagasse Ash and Lime: Effects on Plasticity and Compaction Characteristics of Red Earth
Abstract: The concept of sustainable soil composites (SSC) emerges through blending red earth with bagasse ash (BA) and hydrated lime to enhance geotechnical properties and enable productive reuse of agro-industrial waste. Red earth functions as the matrix, BA acts as a fine pozzolanic microfiller, and lime serves as the chemical binder. BA content ranges from 0% to 60%, with 10% identified as optimal; subsequent lime additions from 1% to 5% evaluate …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1147–1158 Read article
-
Formulation, Evaluation, and Stability Studies of a Topical Clotrimazole and Zinc Oxide Suspension with Enhanced Skin Protective Properties
Abstract: Background: Clotrimazole is a well-known antifungal agent frequently used in the treatment of various superficial fungal infections, while Zinc Oxide is a widely accepted skin protectant with soothing, astringent, and antimicrobial properties. Combining these agents in a topical suspension offers a dual therapeutic approach, enhancing both antifungal efficacy and skin protection. Objective: The objective of this study was to formulate, evaluate, and conduct stability studies on topical suspensions containing Clotrimazole …
Published in Research & Reviews: A Journal of Drug Formulation, Development and Production · Vol. 12, Issue 3, 2025 · pp. 22–31 Read article
-
Microbially Modified Sustainable Cementitious Composites Using Industrial Ash Fillers
Abstract: The growing demand for sustainable, durable construction materials has driven the development of bio-engineered cementitious composites incorporating industrial by-products and self-healing mechanisms. This study investigates a microbially modified cementitious composite that integrates industrial ash fillers with bacteria-based self-healing technology to enhance mechanical performance and microstructural integrity while reducing cement consumption. Cement was partially replaced with industrial ash at 20%, 30%, and 40% replacement levels, and a uratolytic bacterial strain (Bacillus …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 331–350 Read article
-
Enhancing Concrete Durability and Mechanical Properties for Pavement Quality Concrete (PQC) Roads Using Basalt Fiber Reinforcement
Abstract: Concrete, by nature, is brittle and has a very low tensile capacity, which is a double whammy in transportation infrastructure, such as pavement quality concrete (PQC), for roadways, where we need durability and strength. One such method is the use of basalt fibre, as it is a much better way of enhancing the road runway way performance of concrete. This research studies the impact of the addition of basalt fibres …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 266–280 Read article
-
Sustainable Polymer-Based Cementitious Composites with Granite Dust as Fine Aggregate: Strength and Durability Evaluation
Abstract: This study investigates the potential for creating a new kind of cementitious composites that is obtained through the different compositions of rocks and chemicals in which granite dust that is helpful in resistance of chloride penetration and heat of hydration as a substitution with sand in composite. The primary goal of this study focuses on the effect of the stone waste like polymer matrix on evidence bases of researches for …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 325–339 Read article
-
Microstructural Characterisation and Analysis of Mechanical Behaviour of Hybrid AA 7075/7178 Fabricated Using Die Casting Technique
Abstract: AA are being increasingly used in the field of structural engineering owing to their desirable mechanical properties coupled with their recyclable and sustainable nature, thus contributing significantly towards reduction of carbon footprints and development of circular economy. Till date numerous research projects have been prompted to investigate the structural performance of aluminium alloy structures and develop alternatives with enhanced performance parameters. AA 7xxx (Al-Zn-Mg-Cu) are being widely used in variety …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 441–451 Read article
-
Next-Generation Biodegradable Polymer Composites: Enhancing Mechanical and Thermal Performance through Green Reinforcements
Abstract: Next-generation biodegradable polymer composites, combining compostable matrices such as polylactic acid (PLA), polyhydroxyalkanoates (PHAs) and starch-based polymers with green reinforcements (e.g., nanocellulose, lignin, agricultural residues and other bio-fillers), offer a pragmatic route to reconcile high performance with end-of-life sustainability. This paper examines recent advances in the design, processing and interfacial engineering of such composites to enhance mechanical stiffness, strength, toughness and thermal stability while preserving—or intentionally controlling—biodegradation pathways. Emphasis is …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1780–1794 Read article
-
Performance, Combustion and Emission analysis of Sunflower oil based Biodiesel using Non-Dominated Sorting Genetic Algorithm-II
Abstract: Biodiesel is used as alternate fuel of I. C. Engines for so many years. It is obtained from various edible and non-edible oils including waste cooking oils through trans-esterification process in the presence of catalyst. The suitable amount of biodiesel mix with commercial diesel can be used to run the compression ignition engines. The optimum combination of engine input parameters is the challenging task as required by the design engineer …
Published in International Journal of Energy and Thermal Applications · Vol. 1, Issue 1, 2023 · pp. 1–6 Read article
-
Enhancement of Mechanical Properties in Eutectic Al-Si Alloy Matrix Composites Reinforced with Kyanite and Graphite via Stir Casting
Abstract: The purpose of this work is to enhance the mechanical performance of a eutectic Al–Si alloy by incorporating hard ceramic (kyanite) and soft solid lubricant (graphite) reinforcements using a liquid-state stir casting route. Metal matrix composites were fabricated with kyanite contents of 2, 4, and 6 wt.% and a constant 2.5 wt.% graphite. Their microstructures and mechanical properties were systematically evaluated. The microstructure was examined using optical microscopy and energy …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 90–100 Read article
-
Improvement of mechanical properties for PMMA based Denture material
Abstract: Denture material properties can be improved by various fiber addition. The most often used denture materials are polymethyl methacrylate (PMMA) resins; nevertheless, they do not have a high flexural strength (FS). This investigation compared the mechanical characteristics of an injection-molded polyamide. Deflex, an additional injection-molded PMMA base material, SRIvocap, and a typical compression-molded PMMA (Meliodent). The flexural qualities (deflection, bending strength, and bending modulus) of 100 different denture base materials …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 155–165 Read article
-
Mechanical Performance Evaluation of Brachyuran Shell Particle-Infused S-Glass Fibre Epoxy Polymer Composites
Abstract: Epoxy composites bio-filled with brachyuran crab shell powder and reinforced with S-glass fibres at different loadings (2%, 4%, and 6%) are tested for their mechanical properties in this work. Using modest amounts of filler significantly improved hardness, ultimate tensile strength, and flexural strength in the empirical data. The largest increase in hardness was 64.42% at 4% filler, up from 26.22% at 2%; however, there was a dramatic decrease to 13.11% …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 500–507 Read article
-
Representation-Theoretic Symmetry Reduction and Fuzzy-Grey Optimization of Modular Vibration Systems
Abstract: This paper presents a representation-theoretic framework for symmetry-aware vibration control in modular structural systems. Exploiting cyclic symmetry, the mass, damping, and stiffness operators are block-diagonalised into irreducible representations, reducing the full structural dynamics to a collection of lower-dimensional modal subsystems. This decomposition provides both computational efficiency and a rigorous mathematical description of symmetry-preserving dynamic behaviour. To account for imperfections arising in practical implementations, near-symmetry defects in stiffness and damping are …
Published in Emerging Trends in Symmetry · Vol. 2, Issue 1, 2026 · pp. 22–30 Read article
-
Process Optimization of Spot Welding for Galvanized Automotive Steel Sheets
Abstract: Resistance Spot Welding (RSW) is a pillar of the modern automotive industry with the usage of lightweight and high-strength products at the highest point of demand. The optimum weld quality of galvanized steel sheets which is a material of choice because of its additional corrosion protective property is however not achieved easily. This study is a well-developed data-based solution to designing the RSW process in the most efficient way, providing …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 32–42 Read article
-
Effect of Silicon Carbide Filler on Mechanical and Damping Behavior of Basalt/Stainless Steel Hybrid Laminated Composites
Abstract: This study consolidates three experimental investigations on hybrid laminated composites reinforced with basalt fibre, stainless steel (SS) wire mesh, and silicon carbide (SiC) filler using vacuum infusion moulding. Three laminates were fabricated with filler variations of 0%, 1.5%, and 3% by weight of matrix material, maintaining a stacking sequence of [0B/0W/45B/0W/0B/45W]s with a thickness of 4–5 mm. The first investigation focused on impact strength. Drop-weight impact testing revealed a steady …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Performance Evaluation of Rubber Crumb-Modified Bitumen for Sustainable Pavement Applications
Abstract: This research investigates the effect of rubber crumb modification on the physical and mechanical properties of VG-40 bitumen for flexible pavement applications. Rubber crumbs were incorporated at varying percentages (0, 8, 10, 12, 14, and 16%) to analyze their impact on penetration, softening point, ductility, and elastic recovery. Additionally, the Marshall stability test was conducted to evaluate the strength and deformation characteristics of the bitumen mix. The results demonstrated a …
Published in Journal of Geotechnical Engineering · Vol. 12, Issue 2, 2025 · pp. 20–24 Read article
-
Analysis of new Floating Offshore Wind Turbine under drag force operation
Abstract: The goal of this paper is the study and analysis of a new type of floating offshore wind turbine (FOWT), which operates under drag force instead of lifting force as the conventional FOWT. We simulate the wind turbine operation modifying the pitch angle to faithfully reproduce the behavior when submitted to waves’ movement. The analysis of the wind turbine performance is developed in a model at laboratory scale to control …
Published in Journal of Offshore Structure and Technology · Vol. 11, Issue 1, 2024 · pp. 1–10 Read article
-
R-M and M-R Model for Interpreting Logic State of Memristor Aided NOR with Enhanced Noise Margin
Abstract: Memristive crossbar arrays are one of the fascinating subjects in the field of nanoelectronics and memory devices. The arrangement of arrays consists of grid-like structure with rows and columns of memristors which are resistive devices that can preserve their resistance state even after power is turned OFF. They have now emerged as a promising alternative to traditional memory technologies due to their high density, non-volatility and low power consumption. This …
Published in Recent Trends in Mathematics · Vol. 1, Issue 1, 2024 · pp. 35–41 Read article