Search
74 articles for “micro-cracking”
-
Impact of various Fibers on the Mechanical and Durability Performance of Fibre-Reinforced Concrete with SBR latex
Abstract: Recent years included a proliferation of research efforts focused on fibre reinforced concrete (FRC), an innovation that perceives extensive application in the construction industry. FRC's enhanced mechanical properties ahead of conventional concrete have broadened its significance recently. Natural fibers have been produced in response to expanding environmental deterioration in recent years, and research is currently continuing with the goal of utilizing them in the construction field. This study explores the …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 26–40 Read article
-
Catalyst-Driven Degradation and Failure Analysis of Intergranular Cracking in 316H Studded Pipes under Refinery Heat Recovery Conditions
Abstract: A failure analysis investigation was carried out on a high-temperature studded pipe used in a convection module for heat recovery in an oil and gas refinery application after leakage was detected during pre-commissioning hydrotesting. The investigated pipe was manufactured from AISI 316H austenitic stainless steel, and carbon steel studs had been joined to its outer surface by high-frequency resistance welding. Two leaks were reported in the pipe under investigation, and …
Published in Journal of Catalyst & Catalysis · Vol. 13, Issue 1, 2026 Read article
-
Comprehensive Study on the Mechanical and Tribological Response of Waste Tyre Rubber–Natural Fiber Hybrid Epoxy Composites
Abstract: Research into the mechanical and tribological characteristics of Prosopis juliflora-fiber reinforced epoxy-matrix composites with recycled tyre rubber particles is the focus of this investigation. Making use of old tire rubber and bio-reinforcing with fibers from the common invasive plant Prosopis juliflora are the goals of the two-reinforcement techniques. The end goal is to produce long-lasting, cost-effective engineered composite materials with improved performance. A constant epoxy resin matrix was used to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 154–161 Read article
-
Characterization of Fracture Toughness of As-Cast Si-Mo- Cr Ductile Cast Iron
Abstract: In the present study, a Si-Mo-Cr ductile cast iron is developed by taking three different combinations, viz. Heat-1, Heat-2 and Heat-3 of the selective amount of silicon, molybdenum, copper and chromium. For fracture toughness characterization, the specimens are prepared from the samples in "as-cast" conditions. The value of static fracture toughness obtained from the experiments for the specimen of Heat-2 with a fatigue pre-crack is 54.49 MPa√ , whereas, for …
Published in Journal of Polymer & Composites Read article
-
Mechanical Characterization of Kevlar 49 and Pina Fiber Hybrid Composites
Abstract: The pursuit of sustainable yet high-performance materials has accelerated research into hybrid composites that combine synthetic and natural fibers. This study investigates the fabrication and characterization of a Kevlar 49/Pina fiber hybrid composite using epoxy resin as the matrix. Kevlar 49, known for its exceptional tensile strength and energy absorption, was employed as the face sheet material, while Pina fiber, a biodegradable reinforcement extracted from pineapple leaves, was incorporated as …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 301–316 Read article
-
Correlating the Damage Behaviour of Polymer Composites with the Potential Energy of the Impactor
Abstract: Design of structures using composites requires comprehensive evaluation and characterization of mechanical properties in both undamaged and damaged state. Composite laminates undergo combinations of mechanical loading resulting into microdamage accumulation in the plies. The first mode of damage is usually intralaminar cracking with the crack plane transverse to the middle plane of the laminate, spanning the whole width of the laminate. The density of cracks in a ply depends on …
Published in Journal of Materials & Metallurgical Engineering · Vol. 4, Issue 2, 2014 · pp. 1–9 Read article
-
Investigation of Inter Delamination Properties and Morphological Analysis of Natural Fiber-Reinforced Polymer Matrix Composites
Abstract: AbstractNatural fibers are strong, light weight, renewable, cheap, completely or partially recyclable, and biodegradable. The various types of natural fibers are flax, cotton, jute, sisal, kenaf pineapple, bamboo, banana, wood, etc. In this work, sisal fibers and banana fibers have been employed as the main reinforcing materials with epoxy resin as the matrix in order to increase the effectiveness of natural fiber-reinforced polymer matrix composites. In this study, it is …
Published in Journal of Polymer & Composites · Vol. 3, Issue 3, 2015 · pp. 1–7 Read article
-
Solutions to Problems Faced in Well Log Analysis in fractured metamorphic Reservoir Systems Due To Multiple Porosities and Lithology’s
Abstract: Metamorphic rocks are the most bottomless non-terrigenous sedimentary rock and are made essentially out of transformative minerals. Most metamorphic rocks shape from calcareous stores that collect in marine conditions running from salt marshes to reefs to profound sea bowls. Unmistakable and one of a kind parts of transformative rocks are their dominatingly intrabasinal starting point, their essential reliance on natural exercises for their constituents and their powerlessness to change by …
Published in Journal of Petroleum Engineering & Technology · Vol. 9, Issue 1, 2019 · pp. 36–42 Read article
-
Heat Treatment and Cryotreatment Effect on the Fatigue Crack Growth (FCG) in Aluminium 2024
Abstract: AbstractAl 2024 is commonly used in aircraft components, especially for the critical parts like wing and fuselage components. In the present investigation, Al 2024 has been selected subjected heat treatments for the study of fatigue crack growth (FCG) subjected to fatigue loads. Specimens were subjected to fatigue crack growth as per ASTM E-647 standards and the results of FCG were compared. NASGRO software was employed to predict the FCG in …
Published in Journal of Thermal Engineering and Applications · Vol. 6, Issue 1, 2019 · pp. 5–13 Read article
-
Development of Refractory Synthesized from Waste Ceramic Fiber and Chamotte
Abstract: Research on refractory materials is always essential in thermal engineering to ensure both heat savings and environmental protection. Raw materials used initially have a great influence on the production process and product properties. In addition, the refractory products are tested under conditions of high temperature and varying intensity, such as tests of thermal shock resistance. In this study, new refractory composites were prepared by mixing waste ceramic fibers with chamotte …
Published in Journal of Polymer & Composites · Vol. 8, Issue 2, 2020 · pp. 101–109 Read article
-
Thin-in-slab-in-caster to Pursue Heat-in-treat
Abstract: This paper is to resolve the latest scenario in slab caster to suggest fabrication of slab after integrating as well successive next add an addendum formation to end production. Direct thin section produced from existing heat in cast thin slab has been utilized by successive roll reduction and also heat treatment. Endless strip processing (ESP) has linked continuous thin down formation to subject modification of microstructure from as cast to …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 8, Issue 1, 2021 · pp. 30–37 Read article
-
Investigating the Mechanical Properties and Microstructure of AA 7074 Composites with Silicon Nitride Reinforcement
Abstract: This study investigates the mechanical and microstructural properties of AA 7074 aluminium alloy reinforced with 1%, 3%, and 5% by weight of silicon nitride (Si₃N₄), fabricated via the stir casting method, intended for structural aerospace applications. A thorough series of mechanical tests—comprising tensile, compression, hardness, impact, flexural, and wear tests—was performed to assess the influence of differing reinforcing content. The composite containing 5 wt% Si₃N₄ (SN5) demonstrated the most pronounced …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 268–281 Read article
-
Influence of Alkali Treatment on the Tensile Properties of The Hybrid Fiber Reinforced Polymer Matrix Composite
Abstract: In this study, the effect of alkali treatment on the tensile strength of the hibiscus fiber, gongura fiber, and treated madar fiber-reinforced Polymer Matrix Composite (PMC) is studied. The Sodium Hydroxide (NaOH) solution is utilized for madar fiber treatment. The traditional hand layup methodology was used for fabrication. The influence of tensile property control variables such as duration of fiber treatment, concentration of NaOH for treatment, and proportion of fiber …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 28–34 Read article
-
Effect of Heat Treatment on Mechanical Properties of Silver Nanoparticles Embedded in Phosphate Glasses
Abstract: AbstractSilver nanoparticles have been embedded in CaO-P2O5 and CaO-CaF2-P2O5 glasses using melt quenching technique and heat treatment process. The growth of silver nanoparticles in the glass matrix appeared to be time dependent. Mechanical properties such as Vickers hardness, fracture toughness and brittleness for the glass samples were evaluated using a Vickers Indentation technique. Variation in Vickers hardness, Fracture toughness, and brittleness was observed with an increase in the size of …
Published in Journal of Thermal Engineering and Applications · Vol. 5, Issue 3, 2018 · pp. 11–17 Read article
-
Influence of Constant Micro Strain Levels on the Strength Properties of the Asphalt Concrete mixture
Abstract: Asphalt concrete mixture is designed to resist the deformation and vehicular traffic loading throughout its service life. However, when the asphalt concrete pavement practices over loading within the service life period, it exhibits cracking and rutting. In the present investigation, an attempt has been taken to understand the strength performance of asphalt concrete when practicing variable levels of constant stresses. Asphalt concrete mixture was prepared at optimum asphalt cement requirement …
Published in Trends in Transport Engineering and Applications · Vol. 10, Issue 3, 2023 · pp. 29–35 Read article
-
Monitoring the Effectiveness of Water-Based Plants for the Inhibition of Metal
Abstract: The temperature performance profile of the plant extracts shows that inhibition efficiency increased with increasing temperature of the system until at about 323K at 9.00hrs immersion time where a decline in inhibition efficiency occurred implying the opposite at higher temperatures and longer immersion time. Corrosion rate parameters changed with rise in temperature and exposure – immersion time. Plots of rates of corrosion against the volume(s) of the test inhibitor(s) in …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 13, Issue 1, 2026 · pp. 37–46 Read article
-
Effect of Nanoclay Loading on Physical and Mechanical Properties of Epoxy Composites
Abstract: The effects of multilayer silicate loading on hardness, tensile, and impact properties were examined by developing epoxy–nanoclay composites with 0–5 wt% nanoclay. A desirable compromise between reduced void content and higher Shore D hardness was reached with an ideal nanoclay loading of 3 wt%, which reflected improved load transfer and increased matrix stiffness as a result of limited polymer chain mobility. Tensile strength and modulus rose up to 3 wt% …
Published in International Journal of Advance in Molecular Engineering · Vol. 4, Issue 1, 2026 · pp. 36–45 Read article
-
Deformation and Densification Behaviour of Sintered Aluminium Alloy and Chromium Carbide Metal Matrix Preforms
Abstract: This paper presents comprehensive experimental results focused on the deformation and densification behavior of sintered AA2618 - 2% Cr3C2 metal matrix preforms. The study specifically examines preforms with varying aspect ratios subjected to a cold upsetting process. To create the powder preforms, an initial theoretical density of 89% was achieved using a cylindrical die on a 600 kN hydraulic press. The sintering process was conducted in an electric muffle furnace, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 125–131 Read article
-
Effect of Heat Exposure on Structural Integrity of Geopolymer Concrete Composites
Abstract: The research evaluates the thermal degradation effects of high temperatures on Geo Polymer Concrete Composite (GPCC) by examining alccofine concrete, concrete made with alccofine and porcelain waste aggregates. Knowing how GPCC behaves under high temperatures proves essential for protecting buildings during fires as well as industrial applications. Each mix design received composite concrete samples that underwent increased heating conditions from 100°C to 700°C at 200°C intervals. Post-heating, various parameters were …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 318–328 Read article
-
Real-Time Crack Detection in Polymer Composites Using Embedded IoT Sensor Networks
Abstract: This study developed an embedded Internet of Things sensor network for real-time crack detection, localization, and severity assessment in glass–fiber-reinforced polymer composites. Four polyvinylidene fluoride sensors were embedded near the laminate mid-plane and connected to synchronized wireless acquisition nodes. Controlled low-velocity impacts generated graded damage states. Ultrasonic C-scan and optical microscopy provided independent labels. A compact multi-channel convolutional model processed normalized waveforms, spectral entropy, signal energy, and arrival-time differences at …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 866–899 Read article