Search
71 articles for “frictional coefficient”
-
Enhancing Cooling Efficiency in Dual Nozzle CO2-Based Vortex Tube Systems for Machining Titanium Alloys: Implications for Polymer and Composite Processing
Abstract: In machining of Titanium alloys, the cutting temperature plays a vital role that directly influences the performance and it is required to maintain as low as possible. In this study, a dual nozzle Vortex Tube Cooling System (VTCS) that supplies cool compressed CO2 gas is developed to reduce the cutting temperature in Ti-6Al-4V machining. The experiments were conducted at constant cutting and flow parameters during turning at different levels of …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 284–291 Read article
-
Boron Nitride Unleashed: Revolutionary Insights into Its Superhard Phases and Machining Aptitude
Abstract: Exploration from the prehistoric era has proven steel to be a hard substance. According to research, the four main crystalline forms of boron nitride are graphitic, cubic, rhombohedral, and wurtzitic. Better hard materials for industrial processes have been provided by diamond, hard ceramic, and cermet in the process of developing the front of the script, which is descriptive. Turning, cutting, drilling, boring, and grinding of hard materials have been linked …
Published in Journal of Catalyst & Catalysis · Vol. 11, Issue 2, 2024 · pp. 17–24 Read article
-
Process Parameters Optimization of Fiber Laser Cladded SS316 Surface Using RSM Analysis
Abstract: This paper presents the laser cladding experiments on the surface of SS316 to study the variations in process parameters, such as scanning speed (100-250 mm/min), laser power (50-250 W), and % volume of B4C (5- 25%) + SS316 powder on the mechanical, metallurgical and tribological performance of the modified surface. A central composite design (CCD) was used to develop the response surface methodology (RSM) to design the experiments and for …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 186–201 Read article
-
Experimental Analysis of Wear Characteristics in Natural Fibre Composite Materials
Abstract: In mechanical systems, energy loss and material degradation due to attrition are frequently the consequences of sliding contacts, which frequently lead to premature system failure. In this study, at 50°C, 80°C, and 110°C, the hardness was tested; the results showed that the values were 350.7, 422.5, and 455.5 HV, respectively. After conducting a high-temperature wear test, the mass loss of the as-deposited composite coatings was assessed by an electrochemical approach …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 444–450 Read article
-
Experimental Study on Mechanical and Tribological Characterization of Arecanut Shell Fibre Reinforced Composites with MWCNT Nanofillers
Abstract: Natural fiber-reinforced composites (NFRCs) are emerging as sustainable alternatives to conventional synthetic composites due to their eco-friendliness, cost-effectiveness, and favorable mechanical properties. This study evaluates the mechanical and tribological performance of Areca Nutshell Fiber (ANSF)-reinforced epoxy composites with multi-walled carbon nanotubes (MWCNTs) as nanofillers. The composites were fabricated using the vacuum bag molding technique. Tensile tests assessed strength, modulus, and elongation, while flexural tests evaluated bending resistance. Pin-on-disc tests examined …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 47–64 Read article
-
Structure-Property-Process Relationships in BNNS-Modified PEEK Nanocomposites for High-Performance Applications
Abstract: This study reports the design and performance evaluation of boron nitride nanosheet (BNNS)-reinforced polyetheretherketone (PEEK) nanocomposites fabricated using melt compounding and high-temperature Fused Filament Fabrication (FFF). PEEK, a high-performance thermoplastic, was reinforced with BNNS at 0.5–5wt.% to enhance mechanical, thermal, and tribological functionalities for advanced engineering use. Composite filaments were extruded and printed using a modified Bambu Lab FFF printer. Mechanical testing revealed a peak tensile strength of 108 MPa …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 867–888 Read article
-
Investigating The Influence of Sic Reinforcement on The Mechanical and Tribological Properties of PA12 Polymer Composites in SLS
Abstract: The study investigates the mechanical and tribological performance of neat PA12 polymer and SiC-reinforced PA12 polymer composites made via Selective Laser Sintering (SLS). To evaluate just how reinforcement has influence upon overall performance, we incorporated into the PA12 polymer matrix a constant amount of 5 wt.% of Silicon Carbide (SiC). Mechanical testing focused on both tensile and fatigue behavior and testers conducted it with a Servo-Hydraulic Multipurpose High-Capacity Fatigue Test …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 541–554 Read article
-
Investigating the Mechanical Properties and Microstructure of AA 7074 Composites with Silicon Nitride Reinforcement
Abstract: This study investigates the mechanical and microstructural properties of AA 7074 aluminium alloy reinforced with 1%, 3%, and 5% by weight of silicon nitride (Si₃N₄), fabricated via the stir casting method, intended for structural aerospace applications. A thorough series of mechanical tests—comprising tensile, compression, hardness, impact, flexural, and wear tests—was performed to assess the influence of differing reinforcing content. The composite containing 5 wt% Si₃N₄ (SN5) demonstrated the most pronounced …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 268–281 Read article
-
Wear and Tribological Characteristics of Novel Metal Matrix Composites
Abstract: The development of advanced metal matrix composites (MMCs) with enhanced tribological performance has become increasingly important due to the premature failure of critical engineering components operating under severe wear conditions in automotive, aerospace, marine, defense, and power generation systems. Conventional composites such as Copper–Alumina and Aluminium–Silicon Carbide have demonstrated improved mechanical and wear characteristics; however, their widespread application is often limited by issues including particle agglomeration, non-uniform reinforcement distribution, porosity …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1326–1346 Read article
-
Mechanical Characterization of Green Composite Brake Pads Reinforced with Coconut Shell Waste
Abstract: In the present work, coconut shell powder proposed as a replacement material for the eco-friendly brake linings. The composites for brake pad were developed with other sizes of the coconut shell particles, namely (200 µm, 300 µm, 400 µm and 500 µm) The developed samples were evaluated for morphological, mechanical, physical and worability properties. The SEM micrograph proved that the coconut shell particulates are well dispersed in the composite everywhere …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1636–1648 Read article
-
Wear Characteristics of Aluminium-Graphite Composites Produced by Stir Casting Technique
Abstract: Metal matrix composites (MMCs) are finding more applications due to their significantly improved properties such as high specific strength, high specific modulus, good damping capacity and good wear resistance compared to unreinforced alloys. In recent years, there has been an increasing interest in composites containing low density and low cost reinforcements. Graphite is one of the most suitable and low density reinforcement available for making light-weight and wear resistant parts …
Published in Journal of Materials & Metallurgical Engineering · Vol. 4, Issue 3, 2014 · pp. 13–20 Read article
-
Effect of Carbon ,Chromium, Vanadium, Molybdenum, Manganese and Nickel on hardness and wear Resistance of Fe-Cr-C Hardfacing Alloys.
Abstract: The effects of combination of carbon (C), chromium (Cr), vanadium (V), molybdenum (Mo), manganese (Mn) and nickel (Ni) in Fe-Cr-C hardfacing alloy has been investigated on microstructure and microhardness with submerged arc welding (SAW) process. The Optical Microscope (OM) and Vicker micro-hardness tester were used. Powder form of ferro-chrome (Fe-Cr), ferro-vanadium (Fe-V), ferro-molybdenum (Fe-Mo), carbon (C), nickel (Ni) and ferro-manganese (Fe-Mn) were used as alloying elements to form coating layer …
Published in Journal of Materials & Metallurgical Engineering · Vol. 9, Issue 2, 2019 · pp. 20–28 Read article
-
Investigation into mechanical Characterstics of laminated composite materials (PMMA and NYLON) using FDM
Abstract: The widespread embrace of 3D printing technology stems from its capacity to minimize material waste, offer versatile design options, and enable the production of intricate structures. 3D printed polymer composites reinforced with fibers (carbon, glass, nylon etc.) have been extensively used in automobile, marine, aerospace and energetic applications due to their excellent properties. Nylon fiber is light weight, resistance to damage from oil and chemicals, tough, strong and has higher …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 108–121 Read article
-
The Effects of TiC Reinforcement on Thermal, Electrical and Dry Sliding Wear Behaviour of Aluminium Matrix Nanocomposites
Abstract: AbstractThe present work is to investigate the thermal, electrical and dry sliding wear behaviour of a aluminium matrix composite reinforced with dissimilar particle size (≤ 200 nm and 2 μm) of titanium carbide particles. An aluminium matrix composite with 0, 5, 10 and 15 vol.% TiC reinforcement was prepared by using powder metallurgy. A pin-on-disc apparatus was broadly used to investigate the wear behaviour of the Al/TiC nano composites. Wear …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 19, Issue 2, 2017 · pp. 28–41 Read article
-
Processing and Mechanical Characterization of Compression-Molded Ultrahigh Molecular Weight Polyethylene Biocomposite Reinforced with Aluminum Oxide
Abstract: Ultrahigh molecular weight polyethylene (UHMWPE) has been widely used as a bone implant material in orthopedic surgical applications in trauma due to its low coefficient of friction, good biocompatibility, and excellent wear and corrosion resistance properties in comparison to other polyolefins. But, due to the formation of wear debris, implants loosen and fail after 12–15 years of implantation. In order to enhance lifespan, the role of alumina (Al2O3) reinforcement on …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 4, Issue 3, 2014 · pp. 1–12 Read article
-
Effect of Insect Infestation on the Physical Properties of Black Gram (Vigna Mungo)
Abstract: AbstractThough sample research has been conducted to study the effects of insect infestation on the quantitative and qualitative changes in food grains, no elaborate work has been reported on the effects of infestation on the physical properties of grains. In this research, physical properties of black gram including size, geometric mean diameter, sphericity, surface area, aspect ratio, 1000 kernel mass, bulk density, true density, porosity, specific gravity, angle of repose …
Published in Research and Reviews : Journal of Crop science and Technology · Vol. 5, Issue 1, 2016 · pp. 17–24 Read article
-
On the Role of Surface Roughness in Ankle Joint Replacements
Abstract: AbstractResearch efforts in biomechanics have geared towards the long-term effectiveness andsurvival of total joint replacements, because of osteoarthritis causes loosening, instability,wear of articulating components and finally loss of function. Surface roughness of articulatingcomponents significantly influences their tribological behavior. Other factors affecting thewear of articulating surfaces include material and geometrical properties. In this work, thehuman ankle joint is represented by an equivalent ellipsoid-on-plane model to study the effectof surface roughness on …
Published in Research & Reviews : Journal of Physics · Vol. 5, Issue 3, 2016 · pp. 48–55 Read article
-
Numerical Study on Heat Transfer Enhancement of Laminar Flow through a Circular Tube with Artificial Rib Roughness
Abstract: This work presents the configuration optimization of a typical square roughness in a circular tube for laminar heat transfer in air using computational fluid dynamics (CFD) modelling. Conjugate heat transfer 2D numerical model has been developed and successfully carried out. CFD numerical simulations were carried out to analyze the flow and heat transfer in the air duct of a solar air heater provided with rectangular ribs. The laminar flow model …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 1, Issue 3, 2014 · pp. 14–19 Read article
-
Pseudo-Static Limit Equilibrium Method for Bearing Capacity of Footing on Slope and Seismic Uplift Capacity of Horizontal Strip Anchor
Abstract: Seismic bearing capacity for a shallow strip footing embedded in a sloping ground is derived along with seismic uplift capacity of horizontal strip anchors. c-ϕ soil medium is used with limit equilibrium method of analysis. A planar failure mechanism has been adopted. The seismic bearing capacity is determined in the form of a single pseudo-static bearing capacity coefficient (Nγe) in association with unit weight, surcharge and cohesion, which becomes more …
Published in Journal of Geotechnical Engineering · Vol. 6, Issue 3, 2019 · pp. 18–31 Read article
-
Experimental Demonstration on Microfluidic Capillary Flow of Red Dye in Photoresist based Glass Microfluidic Devices
Abstract: In this experimental work, a set of three individual SU-8 based glass microfluidic devices are fabricated by maskless lithography and indirect bonding technique in leakage-free conditions. Commercially available red coloured food dye is used as the selected working liquid. The microfluidic leakage in other set of two leaky microfluidic devices is experimentally demonstrated. Microfluidic devices should be fabricated at leakage-free conditions to achieve exact fluid flow characteristics. The effect of …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 7, Issue 1, 2020 · pp. 1–7 Read article