Search
59 articles for “fourier transform infrared spectroscopy (FTIR)”
-
Effect of Red Mud Loading on the Thermal and Mechanical Performance of Polypropylene Composites
Abstract: Waste red mud (RM) serves as a low-cost and sustainable filler material in a polypropylene (PP) matrix. This study investigate the effects of different red mud contents on the dynamic mechanical and thermal properties of polypropylene-red mud (RM-PP) composites where red mud levels range from 0% to 40% (based on weight percentage). Fourier Transform Infrared Spectroscopy (FTIR) was conducted for verifying the presence of both polypropylene and red mud in …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 161–169 Read article
-
Interfacial Engineering of Carbon Fiber/Epoxy Laminates Using Functionalized Graphene Nanoplatelets: Experimental and Numerical Study
Abstract: Current research work studies the influence of amines(–NH₂) and carboxyl(–COOH) functionalized graphene nanoplatelets on the mechanical and thermomechanical behavior of unidirectional hybrid composite. Composites having different graphene concentration from 0 to 0.7 wt% were fabricated, characterized and analyzed for multiple testing - tensile testing, dynamic mechanical analysis (DMA) and Fourier transform infrared spectroscopy (FTIR). Tensile testing indicates better elastic modulus and tensile strength due to efficient load transfer between nanoparticles …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 61–77 Read article
-
Extraction and Characterization of Pectin from Malabar Tamarind, and Indian Wild Lime
Abstract: Pectin is a versatile heteropolysaccharide that is widely used in the food, pharmaceutical, and biomedical industries because of its gelling, stabilizing, and emulsifying properties. This review discusses the extraction of pectin from agro-waste peels of Malabar tamarind (Garcinia cambogia) and Indian wild lime (Citrus indica) using conventional acid hydrolysis under optimized conditions: pH 1.5–2.0, 85–90°C, and 90 minutes. The process resulted in 22.5% and 27.8% pectin yields, respectively, verified through …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 472–478 Read article
-
Polymer-Mediated Electron Transfer in Eco-Friendly P3HT–rGO Nanocomposites for Optoelectronic Applications
Abstract: Conducting polymer–graphene hybrid nanocomposites have emerged as promising materials for next-generation optoelectronic applications owing to their solution processability, tunable interfacial properties, and mechanical flexibility. Recent studies have highlighted the importance of graphene–polymer hybrid systems in enhancing charge transport pathways, exciton dissociation efficiency, and interfacial stability in organic optoelectronic devices. Despite these advantages, a key challenge remains the efficient production of individual graphene sheets through the reduction of graphene oxide using …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 413–423 Read article
-
High-Performance Polymer Composite Membranes for Selective Ion Transport in Advanced Energy Conversion Systems
Abstract: The development of high-performance Polymer Composite Membranes (PCM) with enhanced ion transport is essential for Polymer Electrolyte Membrane Fuel Cells (PEMFC). However, low-humidity conditions and filter agglomeration still limit long-term membrane stability. This research designs a functionalized PCM integrating cross-linked Poly (Vinyl Alcohol)/Poly (Ethylene Glycol) (PVA/PEG) matrix with sulfonic acid functional groups and Titanium Dioxide (TiO₂) nanofillers to improve selective ion transport under low-humidity conditions. Two types of PCM were …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 724–736 Read article
-
Machine Learning Based Optimization of Polymer Structure Property Relationships in Composite Material Systems
Abstract: In modern engineering applications, polymer-based composite materials have garnered a lot of attention because of their lightweight nature, high strength-to-weight ratio, and changing physical features. In order to maximize the relationships between polymer structure and properties in composite materials, this study suggests a strategy based on reinforcement learning (RL). The research utilized the Polymer Composite Properties Dataset, which contains 12,700 records associated with polymer matrices, reinforcement fillers, interfacial bonding characteristics, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 242–255 Read article
-
A Comprehensive Survey of Polymer Detection Techniques and Computer-Based Analysis Methods for Advanced Material Characterization
Abstract: Polymers are widely used in aerospace, automotive, biomedical, packaging, electronics, and manufacturing industries because of their lightweight nature, durability, and versatility. Accurate polymer identification and characterization are essential for quality control, recycling, performance assessment, and the development of advanced materials. Characterization helps determine important properties such as chemical composition, molecular structure, thermal stability, mechanical strength, and surface morphology, which influence material performance and application suitability. Traditional polymer detection methods include …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 921–929 Read article
-
Synthesis, Characterization, and Thermogravimetric Analysis of Polylactic Acid-Based Bio-Adhesive for Industrial Applications
Abstract: This study investigated the synthesis, characterization, and thermogravimetric analysis of polylactic acid (PLA)-based bio-adhesives for industrial applications. The adhesive was synthesized using an emulsion polymerization method with varying compositions of PLA and vinyl acetate. The physicochemical, mechanical, and thermal properties of the synthesized adhesives were assessed through pH analysis, viscosity measurement, peel strength evaluation, tack tests, biodegradability investigations, Fourier Transform Infrared Spectroscopy (FTIR), Differential Scanning Calorimetry (DSC), and Thermogravimetric Analysis …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 2, 2026 · pp. 39–54 Read article
-
Hybrid Polymer Composites Reinforced with Coconut Shell Fillers and Silica Fume: Synergistic Effects of Industrial By-Products : A Comprehensive Review
Abstract: The increasing requirement of sustainable and high-performance engineering materials has led to increased research in hybrid polymer composites comprising sustainable fillers in the form of renewable biomass or industrial by-products. Among the various bio-fillers that exist, coconut shell filler is gaining much prominence due to its low density, high content of lignin, hardness, and abundance as agricultural waste. Another industrial by-product that is rich in amorphous silica and possesses high …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Synthesis and Structural Characterization of Nanocrystalline CeO2 and Ce0.95Cu0.05O2 Solid Solution Catalysts Properties and its Applications
Abstract: The Main study and the development of CeO2 and Cu doped CeO2 nanocrystals containing transition-metal species are of crucial importance for understanding the preparation and fabrication of CeO2 and Cu doped CeO2 nanoparticles by solution combustion technique to taken glycine as fuel. Here, we have investigated the effect of Cerium dioxide and Cu dopant ions on the structural properties of Ce1-xCuxO2 nanocrystals (NCs) synthesized via co-precipitation technique. XRD results confirmed …
Published in Journal of Catalyst & Catalysis Read article
-
In-Situ Polymerized GO/PANI Composites: Structural Evolution, Optical Modulation, and NH₃ Sensing at Room Temperature
Abstract: Graphene oxide (GO)/polyaniline (PANI) composites with varying PANI contents (20, 40, and 60 wt%) were synthesized via in-situ oxidative polymerization and systematically investigated for their structural, morphological, optical, and gas-sensing properties. X-ray diffraction (XRD) confirmed a progressive increase in interlayer spacing and partial exfoliation of GO layers with increasing PANI content, indicating intercalation-assisted hybridization. Fourier transform infrared (FTIR) spectroscopy revealed the characteristic vibrational bands of both constituents and confirmed strong …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
A non-hydrotreated feedstock’s polyaromatic cracking under FCC industrial operating conditions using an equilibrium catalyst
Abstract: Catalytic cracking of non-hydrotreated atmospheric residue’s main polyaromatic hydrocarbon (PAHs) in the presence of an equilibrium catalyst was investigated under industrial operating conditions. During the fluid catalytic cracking process, the catalyst that presented the key factor in hydrocarbon cracking (aromatic by hydrogen transfer reaction) quickly deactivated and compromised the process’s performance due to its acid surfaces and pores covered by the polyaromatic species. A deep study of the catalyst behavior …
Published in Journal of Catalyst & Catalysis · Vol. 12, Issue 1, 2025 · pp. 10–26 Read article
-
Studies on the Self-Assembly of Steroids and DNA Mediated by Naphthalene based Amphiphilic Block Copolymer
Abstract: Amphiphilic block copolymers have attracted considerable interest in pharmaceutical and biomedical applications, including controlled drug release, gene delivery, and biomolecular sensing. In this study, fluorescent amphiphilic block copolymers were designed to facilitate interactions with biological molecules such as DNA and antiviral agents, enabling their behavior to be monitored through fluorescence spectroscopy. Two novel block copolymers, poly(methyl methacrylate) - b - poly(dimethylaminoethyl methacrylate - co - naphthyl methacrylate) [PMMA-b-P(DMAEMA-co-NMA)] and poly(styrene) …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Synthesis and Applications of Copper- Doped Pyridine Precipitate
Abstract: A metal organic nonlinear optical single crystal, copper doped pyridine material, was created at room temperature using the slow evaporation solution growth technique (SEST). The developed material's crystalline nature was revealed by a powder X-ray diffraction (XRD) analysis. Single crystal XRD study shows that the material synthesized possesses monoclinic system of cell parameters, a = 11.44 Å, b = 7.92 Å, C = 11.74 Å and alpha and gamma is …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 1, 2025 · pp. 51–60 Read article
-
Aluminium-Doped Zinc Ferrite Nanoparticles Synthesized by Combustion Method for Polymer Composite Applications
Abstract: ZnFe₂₋xAlₓO₄ (x = 0 and 0.5) nanoparticles were synthesized via a combustion method owing to its simplicity, cost efficiency, and ability to produce highly crystalline nanomaterials. Powder X-ray diffraction (XRD) analysis confirmed the formation of a single-phase cubic spinel structure without detectable secondary phases, indicating high phase purity. The average crystallite size was estimated to be in the range of 14–20 nm, confirming the nanocrystalline nature of the samples. Field-emission …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 272–282 Read article
-
Influence of Gd Doping in Structural, Morphological and Optical Properties of Zno Nanostructures Synthesised Via Sol-Gel Processes
Abstract: In this study, nanocrystalline Zn1-xGdx (x=0.0 and 0.03) samples were synthesised via the Sol-gel combustion process. An array of analytical techniques was employed to examine the prepared samples to determine their different physical features. For both pristine and Gd-doped samples, the crystal symmetry is hexagonal with the P63mc space group which is verified via the Rietveld refinement analysis of X-ray diffraction (XRD) data. The atoms' bond length Zn-O and bond …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 219–225 Read article
-
Preparation and characterization of High-performance ZnO/PVB Nanocomposite films for UV-shielding and Optoelectronics
Abstract: Zinc oxide nanoparticles can be incorporated into polymer matrices to create materials for various high-performance engineering applications. In this study, zinc oxide nanoparticles were reinforced at different loadings (0.5, 1.0, 0.5, 1.0, 1.5, and 2.0 wt.%) in polyvinyl butyral matrix to synthesize nanocomposite films using the solution casting method. The impact of zinc oxide nanofiller on the morphology and ultraviolet-shielding performance of polyvinyl butyral nanocomposite films was evaluated using various …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 27, Issue 3, 2025 · pp. 35–53 Read article
-
Chemical Modifications of Polymer for Improved Anti-Microbial Action
Abstract: Infections caused by pathogenic microorganisms are a significant concern. Polymers, large molecules formed by chemically connecting monomers, have acquired significant interest due to their intrinsic properties. Polymers function as a matrix for the components that contain antibacterial agents. Developing polymers with antibacterial activity is a crucial research area that aims to alleviate the problem of microbe contamination. The antibacterial polymers typically exhibit prolonged effectiveness. Modification of polymers enhances their anti-microbial …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1919–1931 Read article
-
Bioscouring And Anionization of Waste Cotton Fabric for Efficient Removal of Malachite Green Dye
Abstract: Adsorption is an efficient method for dye removal but the high cost of adsorbents limits its use, emphasizing the need for sustainable, low-cost alternatives. This study explores the usage of modified cotton fabric for the treatment of malachite green (cationic dye) from wastewater. Cellulase extracted from Raphanus sativus and Daucus carota were evaluated for bioscouring potential which was confirmed by scanning electron microscopy. Further, cotton fabric was chemically modified using …
Published in Journal of Water Pollution & Purification Research · Vol. 13, Issue 1, 2026 · pp. 53–68 Read article