Search
215 articles for “flexure”
-
Enhancing Mechanical and Thermal Properties of Glass Fiber-Reinforced Epoxy Composites with Silicon Carbide Additives
Abstract: This study explores the production and characterization of glass fiber-reinforced epoxy resin composites enhanced with silicon carbide (SiC) as a reinforcing filler. The primary objective is to evaluate the impact of SiC on the mechanical, thermal, and morphological properties of the composites. Four different samples with varying SiC weight fractions (0%, 5%, 10%, and 15%) were prepared, keeping the glass fiber content constant. The composites were fabricated using a combination …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 69–77 Read article
-
Study on Evaluation of Mechanical Properties of Kerb Stone Incorporating Polypropylene Material for Enhanced Durability and Performance
Abstract: This study evaluates the mechanical properties of kerb stone incorporating polypropylene (PP) material, to enhance durability and performance. In the wake of increasing environmental concerns and the need for sustainable construction practices, the reuse of plastic waste, particularly polypropylene, has emerged as a promising solution. Polypropylene, known for its durability, resistance to chemical attacks, and low water absorption, offers significant potential when integrated into concrete products. In this research, standard …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 73–84 Read article
-
Mechanical Characteristic Analysis of Five-Layer Carbon-Carbon Composite Material
Abstract: The current study investigates the fabrication and mechanical strength of five-layer carbon-carbon composite. The strong five-layer carbon-carbon composite material with high strength and modulus is made of a raw material called precursors. The polyacrylonitrile (PAN) method is used in the fabrication of carbon fiber. The characteristics of the resulting carbon material depend on the composition and structure of the precursor. A sheet of 50 x 40 cm five-layer carbon-carbon composite …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 405–417 Read article
-
An Experimental Investigation of Polyethylene Terephthalate Fibers in the Properties of Concrete
Abstract: In India near about every year 45 million tons of solid waste is generated. The solid waste rate is increasing of 1.5 to 2% every year. In that total solid waste, Plastics contains 12.3% waste generated in which most common are the water bottles. Now the present worldwide situation, the production of PET (Polyethylene Terephthalate) exceeds 6.9 million tons per year. So that it is necessary to reusing of PET …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1063–1072 Read article
-
Optimizing Mechanical Properties of Polypropylene Fibre-Reinforced Coconut Shell Concrete
Abstract: This study investigates the impact of polypropylene (PP) fibre reinforcement on the mechanical properties of coconut shell (CS) concrete. The compressive strength of CS concrete is primarily governed by the strength of CS aggregates, with early-age failure attributed to poor bonding and later-stage failure influenced by aggregate strength. The incorporation of PP fibres significantly enhanced compressive, tensile, and flexural strength. At 28 days, compressive strength increased by 1.2–3.45% in CSF …
Published in Recent Trends in Civil Engineering & Technology · Vol. 15, Issue 2, 2025 · pp. 6–12 Read article
-
Strength Enhancement of Concrete with Nano-Based Admixtures
Abstract: The integration of advanced nanomaterials such as nano-silica and nano-clay has emerged as a highly promising and innovative technique to significantly enhance the mechanical characteristics and long-term durability of conventional concrete. In this comprehensive study, the effects of nano-modification on various concrete properties, including workability, compressive strength, split tensile strength, and flexural behavior, were thoroughly evaluated through a systematic experimental program. A series of concrete mix designs incorporating varying proportions …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 3, 2025 Read article
-
Performance Evaluation of PET Strip Fiber Reinforced Concrete
Abstract: Polyethylene Terephthalate, commonly known as PET, is a petroleum-based plastic polymer that is widely used in the packaging of various commodities due to its durability, and poses a major threat to the environment. To tackle this scenario, the construction industry is researching all possibilities to incorporate this waste into concrete and enhance the properties of concrete. The present study evaluates the performance characteristics of M 30 grade concrete when reinforced …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1076–1088 Read article
-
Evaluation of Mechanical Properties of Arecanut Fiber Reinforced Epoxy Composite
Abstract: This study investigates the mechanical performance of arecanut fiber-reinforced epoxy composites, aiming to evaluate their potential for sustainable industrial applications. Arecanut husk fibers, an agricultural waste product, were selected for their natural abundance and biodegradability. To enhance fiber-matrix bonding, the fibers were chemically treated with sodium hydroxide (NaOH), which effectively removes lignin, hemicellulose, and other impurities, improving surface roughness and interfacial adhesion. The treated fibers were then incorporated into an …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 389–400 Read article
-
Effect of Span, Load Intensity, and Beam Geometry on Stress and Deflection Behavior of RCC Beams
Abstract: This study investigates the influence of variations in beam geometry, span, load intensity, and permissible stresses on the structural behavior of reinforced concrete beams. Using classical bending and shear stress formulations, the effects of a 20% increase in key parameters were analytically evaluated. Results indicate that a 20% increase in beam span leads to a proportional 20% increase in beam depth, whereas a 20% increase in beam width or permissible …
Published in Journal of Structural Engineering and Management · Vol. 13, Issue 1, 2026 · pp. 9–22 Read article
-
Experimental Investigation of Hybrid Natural Fiber Reinforced Epoxy Composites Using Banana and Sugar Palm Fibers
Abstract: This paper is a research study that examines the mechanical and morphological properties of hybrid natural fiber reinforced epoxy composites manufactured from banana fibers (BF) and sugar palm fibers (SPF). Because the use of sustainable, lightweight, and cost effective materials in engineering continues to grow, many engineers are looking at the possibility of utilizing natural fiber reinforced polymer composites as alternatives to traditional man-made fiber composites. Hybrid composite laminate samples …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 195–205 Read article
-
Analysis of Fibre Reinforced Beams
Abstract: There has been research into the flexural behaviour of composite beams with a variety of fibre layer depths, all of which were designed using the balancing section and the limit state design idea. The fibre depth is estimated to be 112 mm (d = 112 mm), with the first three dimensions being 94.44 mm (d1 = 94.44 mm), 46.12 mm (d2 = 22.35 mm), and 22.35 mm (d3) respectively. The …
Published in Journal of Polymer & Composites · Vol. 11, Issue 4, 2023 · pp. 53–59 Read article
-
Functionally Graded Natural Fibre and SiC-reinforced Polymer Composite: Mechanical Properties
Abstract: Multifunctional materials, also called functionally graded materials (FGMs), are based on natural fibres or fillers and vary in composition and/or microstructure to control functional, structural, or thermal, properties. Functionally graded materials (FGMs) have been created for use in spacecraft, aircraft, and other engineering applications because they can withstand extremely high temperatures. Particle-reinforced FGMs, which make up the majority of FGMs, are made differently depending on their position. The mechanical and …
Published in Journal of Polymer & Composites · Vol. 11, Issue 4, 2023 · pp. 1–14 Read article
-
Evaluating the behavior of Concrete after addition of stone dust to steel fiber reinforced concrete
Abstract: In contemporary construction practices, the utilization of concrete has become indispensable for various civil engineering projects worldwide. Concrete, augmented with both natural and artificial fibers, plays a crucial role in bearing compressive loads and efficiently transferring structural loads to the reinforcement and foundation. The current research delves into exploring the transformative effects of different mix designs, incorporating varying percentages of steel fibers, on the behavior of concrete. The study encompasses …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 12–19 Read article
-
A Comprehensive Review of Geopolymer Concrete: Performance and Incorporation in RCC Beams
Abstract: This review paper provides a succinct overview of recent strides in geopolymer concrete technology, focusing on its strength, durability, and sustainable applications. Beginning with the fundamental principles of geopolymerization, the paper delves into the latest research findings, emphasizing enhancements in compressive and flexural strength. It critically analyzes the durability of geopolymer concrete against environmental factors and explores innovative strategies, such as incorporating supplementary cementitious materials and nanomaterials, to improve its …
Published in Journal of Construction Engineering, Technology & Management · Vol. 14, Issue 1, 2024 · pp. 7–12 Read article
-
Detecting the Failure Stages in Asphalt Concrete Through the Fatigue Life
Abstract: The signs of failure initiation in asphalt concrete through its service life may appear as cracking, rutting, or other types of distress after practicing dynamic stresses from vehicular loading. This work is concerned with detecting the failure initiation in asphalt concrete in the laboratory, and the role of binder content and constant strain level through a comprehensive testing program. Asphalt concrete mixtures were formulated with the optimal binder content, as …
Published in Trends in Transport Engineering and Applications · Vol. 11, Issue 1, 2024 · pp. 21–27 Read article
-
Experimental Research on the Strength Properties of Concrete with Recycled Aggregate, Pond Ash, and Rubber Powder Replaced in Part for Concrete Materials in Standard Grades
Abstract: Concrete, a fundamental material in modern construction, poses environmental concerns due to its significant carbon footprint. To mitigate this impact, researchers explore alternative materials like fly ash, GGBS, alcofine, and rubber powder as cement replacements. This study examines the durability and strength of concrete that contains recycled aggregate, pond ash, and waste rubber powder. Waste rubber, abundant from industrial and automotive sources, poses disposal challenges. Pond ash, a byproduct of …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 11–21 Read article
-
Experimental Studies on the Mechanical and Microstructural Properties of Sustainable Concrete Incorporating Palm Oil Industrial Waste
Abstract: Diving into the world of concrete, normal concrete is widely used in construction but poses environmental challenges due to significant carbon dioxide emissions from cement production. Incorporating oil palm shells (OPS) and palm oil fuel ash (POFA) into concrete offers a sustainable alternative, utilizing waste products from the palm oil industry and reducing environmental impact. Experimental studies have examined the use of OPS and POFA as partial replacements for coarse …
Published in Journal of Polymer & Composites · Vol. 12, Issue 7, 2024 · pp. 19–40 Read article
-
New Generation Waste Material as Sustainable Ingredient in Concrete: An Experimental Approach
Abstract: E-waste, including devices like phones and computers, poses serious environmental risks. To mitigate these, the construction industry is exploring e-waste as a material to enhance concrete strength and durability. Hence, the present study assesses the performance of M40-grade high-strength concrete by replacing coarse aggregates with 0% to 30% e-waste plastics at various intervals. As the e-waste replacement increased, fresh concrete's workability decreased gradually. The mix containing 30% e-waste experienced the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 141–156 Read article
-
Impact of Polypropylene Fibres on the Properties of Concrete
Abstract: This review paper explores the effects of polypropylene fibres on the mechanical and structural properties of concrete. The integration of short, discontinuous fibres into plain concrete enhances its post-cracking behavior and overall performance, with notable improvements in tensile strength, fracture strength, toughness, impact resistance, and flexural strength. These fibres effectively control crack propagation, increase energy absorption, and improve durability under varying loading conditions. A comprehensive analysis of prior research highlights …
Published in Journal of Construction Engineering, Technology & Management · Vol. 14, Issue 3, 2024 · pp. 55–60 Read article
-
Evaluating the Structural Performance of Concrete with Partial Replacement of Fine Aggregate by Plastic Waste
Abstract: This work evaluates the performance of concrete incorporating plastic waste as a partial replacement for fine aggregate, at replacement levels of 0%, 5%, 10%, 15%, and 20%. Various tests were conducted on fresh and hardened concrete to assess workability, strength, and durability. The slump cone and compaction factor tests were used to measure workability, yielding a slump range between 25–30 mm and a compaction factor of 0.98, indicating medium workability. …
Published in Journal of Structural Engineering and Management · Vol. 11, Issue 3, 2024 · pp. 69–75 Read article