Search
297 articles for “displacements”
-
Review On BIM-Based (Revit+Robot Software) Comparative Wind Load Analysis of High-Rise RCC Buildings in Zone-III, IV and V
Abstract: Wind load is one of the most critical factors influencing the design and serviceability of high-rise reinforced concrete (RCC) buildings. As building height increases, wind-induced effects such as storey drift, lateral displacement, and structural stiffness become dominant design considerations. Numerous studies have been conducted using conventional and advanced techniques such as Finite Element Method (FEM), Computational Fluid Dynamics (CFD), and Building Information Modelling (BIM). However, limited research focuses on comparative …
Published in Journal of Structural Engineering and Management · Vol. 13, Issue 2, 2026 · pp. 27–41 Read article
-
Numerical and Experimental Modal Analysis of Square Sheets of Low Carbon Steel Under Different Boundary Conditions
Abstract: Dynamic analysis of square plates has been a subject of fundamental research interest over several decades. In these analyses, several dynamic aspects such as modal frequencies, occurrence of harmonics, mode shapes, displacement pattern of position vector, location of maximum displacement and damping characteristics are studied which provide critical inputs for structural design engineers. In this paper, a detailed modal analysis (both modal frequencies and mode shapes) of low carbon steel …
Published in Journal of Experimental & Applied Mechanics · Vol. 14, Issue 2, 2023 · pp. 15–22 Read article
-
Investigations on Piezoactuator-Based Active Vibration Isolation for Tool-Based Micromachining Applications
Abstract: Stacked piezoactuators are suitable actuators for active vibration isolation systems due to their high stiffness and fast response. However, they exhibit hysteresis nonlinearity between applied voltage and the resulting displacement. In this paper, Bouc-Wen model is used to model the hysteresis nonlinearity of stacked piezoactuator. The model parameters are estimated from the experimental voltage-displacement data of a stacked piezoactuator using “Trust-region nonlinear least square method” in MATLAB Simulink. The resulting …
Published in Journal of Mechatronics and Automation · Vol. 2, Issue 1, 2015 · pp. 41–49 Read article
-
Different Confinement Pattern and Behavior of Short Concrete Column
Abstract: In recent years, as the economy of country grows, vast construction is done in our country. Among which majority of people have consulted with skilled persons, and there are some who constructed without involvement of professionals. In such scenario professionals to the best of their knowledge followed the techniques as mentioned in IS code for a column. But in those cases where professionals are not consulted and unskilled person construct …
Published in Journal of Structural Engineering and Management · Vol. 3, Issue 2, 2016 · pp. 51–55 Read article
-
Seismic Analysis of G+10 Building With and Without Zipper Brace Frame
Abstract: This paper presents a seismic analysis of a G+10 building with and without Zipper Brace Frame (ZBF). The research begins with a detailed literature review, investigating the existing seismic-resistant techniques employed in high-rise buildings. The Zipper Brace Frame is introduced as an innovative system that has shown promising results in enhancing seismic performance while maintaining architectural aesthetics. Two analytical models are created: one without bracing systems and the other incorporating …
Published in Journal of Structural Engineering and Management · Vol. 10, Issue 3, 2023 · pp. 27–34 Read article
-
Propagation of Thrust Due to Movement of Vehicle on Road
Abstract: The rapid growth of high-speed transportation systems has necessitated a detailed assessment of the structural effects induced by moving heavy vehicles. This study investigates the lateral thrust generated by high-speed vehicular movement and its implications for the design and safety evaluation of transportation infrastructure. A representative vehicle with dimensions of 18 m length, 5 m height, and 4 m width was considered for the analysis. The impact load generated by …
Published in Trends in Transport Engineering and Applications · Vol. 13, Issue 2, 2026 · pp. 30–37 Read article
-
Finite Element Analysis of Thick Beams using Lagrange-9 Element and ADINA
Abstract: There has been a lot of research in the field of thick beam analysis. The classical beam theory was the first beam theory but it neglected the effects of shear deformation and this induce the need for further research to develop the beam theory to be helpful in thick beams where the shear deformation is paramount. In this research work, the trigonometric shear deformation theory for thick beam, which includes …
Published in Journal of Experimental & Applied Mechanics · Vol. 7, Issue 3, 2016 · pp. 50–57 Read article
-
Thermo-mechanical Analysis of Orthotropic plate under Sinusoidally Distributed Thermal load by using Trigonometric shear Deformation Theory (TSDT)
Abstract: For the thermal analysis of simply supported square and rectangular plates applied to sinusoidal distributed linear thermal load throughout the plate thickness and in combination with sinusoidal distributed transverse mechanical loading, a trigonometric shear deformation theory is proposed. In this work, a sinusoidal function in terms of thickness coordinates is being used in the displacement field in conjunction with the transverse shear deformation effect. The normal and shear stress can …
Published in Journal of Experimental & Applied Mechanics · Vol. 13, Issue 4, 2022 Read article
-
Erthquake Response of Shear Wall Integrated Step-Back Set-Back Structures on Sloped Ground
Abstract: The study examines how well step-back set-back structures perform seismically when they are resting on a 27° slope in terms of base shear, maximum story displacement, story drift, and time period. Shear walls 200 mm thick are positioned at various points. The seismic performance of the square plan structure having shear wall at corner locations is presented in this study. The study's findings indicate that the shear wall's position affects …
Published in Journal of Geotechnical Engineering · Vol. 11, Issue 2, 2024 · pp. 22–31 Read article
-
PERFORMANCE-BASED WIND RESPONSE ANALYSIS OF TALL RCC IREGULAR STRUCTURES USING AUTODESK REVIT AND ROBOT STRUCTURAL ANALYSIS
Abstract: The increasing trend of vertical construction has made wind effects a critical consideration in the design of tall reinforced concrete (RCC) buildings. The response of such structures is largely governed by their geometric configuration, stiffness characteristics, and modelling accuracy under wind loading conditions Wind loads are evaluated based on standard provisions such as IS 875 (Part 3): 2015, which provide essential guidelines for structural safety This study focuses on evaluating …
Published in Journal of Structural Engineering and Management · Vol. 13, Issue 3, 2026 Read article
-
Experimental Test for the Replacement of Aluminum Sheets Instead of Steel Sheets in the Automotive Industry and the Effect of this Replacement
Abstract: Nowadays, vehicles cause air pollution due to high fuel consumption, and it has a direct relationship with increasing vehicle weigh. The increase of pollution will lead to rise in greenhouse gases that will cause special damages during a long period time. In this paper, instead of using steel sheets, aluminum sheets are proposed for the vehicle body and its interior components. It is attractive to increase its speed by reduction …
Published in Journal of Automobile Engineering and Applications · Vol. 7, Issue 3, 2020 · pp. 34–39 Read article
-
Thermo-mechanical Analysis of Orthotropic plate under Sinusoidally Distributed Thermal load by using Trigonometric shear Deformation Theory (TSDT)
Abstract: For the thermal analysis of simply supported square and rectangular plates applied to sinusoidaldistributed linear thermal load throughout the plate thickness and in combination with sinusoidaldistributed transverse mechanical loading, a trigonometric shear deformation theory is proposed. Inthis work, a sinusoidal function in terms of thickness coordinates is being used in the displacement fieldin conjunction with the transverse shear deformation effect. The normal and shear stress can bedetermined by using the …
Published in Journal of Experimental & Applied Mechanics · Vol. 12, Issue 3, 2021 · pp. 10–33 Read article
-
A study to investigate the shear strength resistance of Ennore sand from conventional direct shear test.
Abstract: In this article analysis of shear strength parameters of Ennore Sand is given using the direct shear test. The shear strength parameters of cohesion and angle of shearing resistance are employed in the construction of geotechnical constructions to describe the soil's ability to sustain shear stress when subjected to a certain load. These might be measured using laboratory or field testing. When shearing a sample in a direct shear apparatus, …
Published in Journal of Geotechnical Engineering · Vol. 9, Issue 3, 2022 · pp. 19–26 Read article
-
A Seismic Analysis of R.C. Structures Under Tuned Mass Damper System.
Abstract: A Seismic Analysis of R.C. Structures Under Tuned Mass Damper System treats seismic force reduction of multi-storey buildings using embedded dampers. tuned mass damper is investigated. Dynamic analysis was carried out using Etabs to obtain the damped and undamped responses of the structure in terms of deflections at all storeys in order to evaluate the effectiveness of the damping system to reduce the seismic response. The earthquake zone v used …
Published in Journal of Structural Engineering and Management · Vol. 6, Issue 1, 2019 · pp. 28–36 Read article
-
Structural Health Monitoring of Bridges using Digital Image Correlation: A Case Study
Abstract: The rapid development of the transportation section and continuous change in traffic volume, density, and loading patterns over the last few decades have increased the probability of a hazard and reduced the life of existing bridges. Structural Health Monitoring (SHM) is a process of implementing a damage detection and characterization strategy for engineering structures. This paper presents a review of various trends and technology adopted for SHM. However, it focuses …
Published in Recent Trends in Civil Engineering & Technology · Vol. 9, Issue 3, 2019 · pp. 1–10 Read article
-
Experimental testing of spring for absorption of sudden impact on spring (Transmissibility)
Abstract: Shock absorber is used to sustain & absorb the shock & jerk during working / running condition of machine / Vehicle. This test rig is used to study performance of shock absorber at different operating speeds. This paper presents systematic Experimental investigations increasing dynamic load suspension system (coil spring). One of the major differences of this study from previous work is that it includes parametric sensitivity analysis in order to …
Published in Trends in Mechanical Engineering & Technology · Vol. 8, Issue 3, 2018 · pp. 28–32 Read article
-
Extract Entity And Attributes From User Requirements by Applying On Natural Language Processing (NLP) Model.
Abstract: Automatic generation of entity and attributes from end user requirement reduces cost, time and complexity of software development process. The main aim of this research work is to transform user requirement to Natural Language Processing (NLP) for reducing the ambiguity, inconsistency and incompleteness, and finally extract entity and attributes. This study discusses some initial experiments which are encouraging further research to help in improving the software development process. It focuses …
Published in Recent Trends in Programming languages · Vol. 8, Issue 1, 2021 · pp. 9–15 Read article
-
Modelling of Large Elasto-plastic Deformations by EFGM
Abstract: Current work reports modelling and simulation of geometric and material nonlinearities arising due large elasto-plastic displacements in structural specimens by invoking enriched element free Galerkin method (EFGM). The displacement approximations are constructed by using moving least square approach. Standard displacement based approximations are modified by incorporating suitable enrichment functions depending on the nature of interfaces present in the components. Large deformations give rise to geometric nonlinearities which have been modelled …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 130–143 Read article
-
DYNAMIC ANALYSIS OF STRUCTURES CONSIDERING WAFFLE SLAB WITH AND WITHOUT DROPS AND BEAMS
Abstract: The seismic performance of a structure is a fundamental and vital aspect of structural engineering, carrying significant importance in ensuring safety and stability. This study investigates the dynamic behavior of structures employing waffle slab designs with and without drops and beams, focusing on varying panel sizes. Commercial buildings, each comprising 12 stories with heights of 3.5 meters, were analyzed using the Response Spectrum Method in seismic Zone III, utilizing ETABS …
Published in Recent Trends in Civil Engineering & Technology · Vol. 14, Issue 2, 2024 · pp. 41–60 Read article
-
Carbon Fiber Impact Attenuator: A Comprehensive Design and Analysis Approach
Abstract: In the high-stakes world of Formula One competition, accidents are a sad reality. The primary causes of these accidents are violent overtaking, high speeds, and environmental factors. All of these causes result in accidents, such as a car colliding head-on with barricades, two automobiles colliding, a car skidding on a wet track, etc. Driver safety must be improved, and accidents of this nature must be avoided. One such safety elements …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 452–468 Read article