Search
170 articles for “Scanning electron Microscope”
-
Effect of Red Mud Loading on the Thermal and Mechanical Performance of Polypropylene Composites
Abstract: Waste red mud (RM) serves as a low-cost and sustainable filler material in a polypropylene (PP) matrix. This study investigate the effects of different red mud contents on the dynamic mechanical and thermal properties of polypropylene-red mud (RM-PP) composites where red mud levels range from 0% to 40% (based on weight percentage). Fourier Transform Infrared Spectroscopy (FTIR) was conducted for verifying the presence of both polypropylene and red mud in …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 161–169 Read article
-
Smart Biopolymer–PCM Composite Modules with Embedded Wireless Thermal Sensing for Autonomous Energy Storage Applications
Abstract: The development of multifunctional polymer composite systems for intelligent thermal energy storage has gained significant attention due to the increasing demand for sustainable and autonomous thermal management technologies. In the present study, a wireless-integrated biopolymer–phase change material (PCM) composite module embedded with thermal feedback sensors was successfully fabricated and experimentally investigated for advanced thermal energy storage applications. Polylactic acid (PLA) was employed as the biodegradable polymer matrix, while paraffin wax …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 193–205 Read article
-
Structure–Property Relationships in Poly (N isopropylacrylamide) Hydrogels: Toward Thermoresponsive Polymer Composites
Abstract: Poly(N-isopropylacrylamide) (PNIPAAm) hydrogels can shift from solid to gel and back again at body temperature. Due to their lack structural integrity, thermal stability, and mechanical strength, they are difficult to use. This study mixed PNIPAAm with biocompatible fillers like chitosan and silicon nanoparticles to create hydrogels with superior structure-property correlations. Free radical polymerization with ammonium persulfate/TEMED initiator and N,N′-methylenebisacrylamide crosslinker produced the composites. Scanning electron microscopy showed a denser, interconnected …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 884–895 Read article
-
Process Parameters Optimization of Fiber Laser Cladded SS316 Surface Using RSM Analysis
Abstract: This paper presents the laser cladding experiments on the surface of SS316 to study the variations in process parameters, such as scanning speed (100-250 mm/min), laser power (50-250 W), and % volume of B4C (5- 25%) + SS316 powder on the mechanical, metallurgical and tribological performance of the modified surface. A central composite design (CCD) was used to develop the response surface methodology (RSM) to design the experiments and for …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 186–201 Read article
-
Exploration of Copper Oxide PVA/PEG Paraffin Polymer Composites for Enhanced Thermal Performance of Nano-Enhanced Phase Change Materials and Their Environmental Impact
Abstract: This study investigates the synthesis, characterization, and application of copper oxide (CuO) nanoparticles integrated into polymer-based paraffin wax composites for advanced thermal management applications. CuO nanoparticles were synthesized using a wet chemical approach and characterized through X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and dynamic light scattering (DLS), confirming their crystalline structure, morphology, and nanoscale size distribution. The synthesized nanoparticles were incorporated into polymer-supported phase change …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 156–173 Read article
-
Crosslinked Starch Polymer for Coating on Fruit/Vegetable for Preservation Derived from Waste De-Oiled Soybean Cake
Abstract: Cross-linked starch films have been prepared by reacting starch extracted from de-oiled soybean cake (waste material from oil industry) with bio-based acids citric acid and tartaric acid. The obtained films were characterized by spectroscopic, thermal and surface morphological techniques. Thermal analysis showed that thin film has good thermal stability. The micrographs obtained from scanning electron microscopy showed the film surface has smooth and uniform morphology. Biological properties like cytocompatibility, antimicrobial …
Published in Journal of Catalyst & Catalysis Read article
-
Application of Sensor Effect on Chlorodiazepam of Polyaniline Doped Silver Nanocomposite
Abstract: In order to ease the creation of the polymeric nanocomposite known as PANI/Ag, pani-doped silver nanoparticles were oxidised chemically and then exposed to the oxidation process. Aniline with varying amounts of silver nanoparticles added to it can be used to make a nanocomposite known as PANI/Ag in an acid solution at room temperature by employing ammonium persulfate as the oxidising agent. This can be done by using aniline with different …
Published in Journal of Polymer & Composites Read article
-
Experimental Analysis of Nano-carbon Doped Alumina for Industrial Applications
Abstract: The use of nano-carbon metal matrix composites can provide a solution to the enduring issue of optimal material selection and optimization for getting metal-insulator transition (MIT) behavior at a particular frequency at ambient temperature. Other substances, like two-dimensional (2D) transition metal dichalcogenides (TMD), vanadium oxide (VO2), and germanium telluride (Ge-Te), have difficult challenges in achieving effectively the MIT property at a given frequency and temperature. It is also difficult to …
Published in Journal of Polymer & Composites Read article
-
Study of Electrochemical and Mechanical Properties of Graphene/HAp Composite Coating on Ti-13Nb-13Zr Alloy via Electrophoretic Deposition for Biomedical Application
Abstract: Titanium-13niobium-13zirconium alloy has widespread potential in biomedical applications due to its high degree of biocompatibility, favourable mechanical properties, high corrosion resistance, and high possibility of osseointegration. The surface was improved by electrophoretic deposition method using hydroxyapatite and graphene (5 g nanoHAp) (5 g nanoHAp+0.06 nanoGr) and suspended in ethanol solution at different conditions of time (1, 3, and 7 minutes) and voltage (50, 70, and 100 V). The effect of …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 91–106 Read article
-
Influence of Crystallization Time by Hydrothermal Synthesis of Ag NPs-Zeolite Composite
Abstract: The nanocomposites Ag NPs-zeolite involve zeolite loaded with silver nanoparticles and have been prepared by an easy one-pot hydrothermal autoclave method. Three samples of silver-bearing zeolite were prepared for 8 hours, 6 hours, and 4 hours, respectively, inside an autoclave at 100°C. A range of characterization procedures were used to examine the samples, such as x-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), UV-visible spectroscopy, and zeta potential. Results …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 80–90 Read article
-
Development and Evaluation of a Novel Polyaniline/Polyvinyl Alcohol/Silver Nanocomposite for Antibacterial Applications: Synthesis and Characterization
Abstract: A novel nanocomposite made up of polyaniline, polyvinyl alcohol, and silver (PAL/PVA/Ag) was synthesized using the reduction of chemical technique in this study. Aniline was polymerized in situ with ammonium persulfate to create polyaniline (PAL), while Ag+ ions were employed to make an nanoparticle of Ag colloidal solution. The combination of Ag nanoparticles with the PAL/PVA composite resulted in the development of a new nanocomposite. Scanning electron microscopy (SEM) and …
Published in Journal of Polymer & Composites · Vol. 11, Issue 3, 2023 · pp. 39–47 Read article
-
A Comparative Study of Zinc Oxide Nano Particles Synthesized by Hydrothermal, Sol-gel and Thermal Decomposition
Abstract: In the proposed work, Zinc oxide nano particles (ZnO NP's) are synthesized using three different methods: Hydrothermal, Sol-gel and Thermal decomposition. The samples are characterized using X- ray diffraction (XRD), UV visible spectroscopy (UV-Vis), Fourier Transform Infrared Spectroscopy (FT-IR) and scanning electron microscopy (SEM). The XRD pattern exhibit single-phase polycrystalline nature of all the samples exhibiting the most intense peak at (101). The diffraction peaks are located at 31.80, 34.46, …
Published in Journal of Polymer & Composites · Vol. 11, Issue 7, 2023 · pp. 39–45 Read article
-
Fracture behavior of 2124Al- 10vol% SiCp composite tensile specimens for different heat treatment conditions
Abstract: This article presents experimental details on 2124Al-10vol% SiCp composite tensile specimens, which were made by squeeze casting process. Cast metal composites are generally very brittle and have poor mechanical properties. To strengthen the matrix and improve ductility, the specimens were heat-treated by solutionizing and aging. Experiments were carried out at 3 different solutionizing temperatures, solutionizing time, aging temperature and aging time to examine the influence of heat treatment process parameters …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 279–291 Read article
-
Experimental investigation of thermally grown Indium film’s structural and tribological properties
Abstract: Indium thin film growth found numerous applications, such as cold welding of infrared detectors and readout-integrated circuits (ROIC) to form sensor chips. In film is grown on the Si substrate by thermal evaporation. The XRD results indicated the tetragonal bcc phase in the (101) preferential plane. Scanning electron microscopy (SEM) indicated an uniform, continuous film covering the whole surface. The EDS examination confirmed the pure In film. The atomic force …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 58–66 Read article
-
Hydrothermal modification of carbon fiber fabrics by ZnO nanorods for mechanical strengthening of CFRP laminates
Abstract: Hexagonal ZnO nanorods were produced on plain woven carbon fiber using a two-step seed-assisted hydrothermal procedure. By varying the process parameters such as molar concentrations, number of seeding cycles, and growth duration at a controlled growth temperature of 90 °C, it is feasible to produce ZnO nanostructures with a range of morphologies, including nanowires, hexagonal nanorods, and nanoflowers. The developed morphologies were examined using field emission scanning electron microscopy and …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 127–139 Read article
-
Performance Evaluation of Eco-friendly Cutting Fluid in Machining Process—An Approach towards Environmentally Friendly Production
Abstract: The machining industry's evolving environmental consciousness has prompted a growing demand for cutting fluids devoid of chlorine and sulphur, thus fostering sustainable machining practices. This surge in demand is driven by mounting apprehensions over environmental contamination and worker safety. As the industry transitions to modern cutting fluids, it becomes imperative to comprehend their effectiveness and the optimal machine parameters required for their deployment in the turning process. In our current …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 149–160 Read article
-
Dielectric Properties of Reduced Graphene Oxide with Nickel Cobalt Ferrite and Nickel Zinc Ferrite Epoxy Nanocomposites
Abstract: In this work, two systems of the composite were prepared using NiCoFe and NiZnFe with reduced graphene oxide(rGO) epoxy and the samples were subjected to electrochemical impedance spectroscopy (EIS). The Quality factor and loss tangent values of the composite was found out as a function of frequency. The modified ferrite-graphene-epoxy blends show dielectric loss and Quality factor values at low frequency. The incorporation of graphene aims to improve electrical conductivity, …
Published in Journal of Polymer & Composites · Vol. 11, Issue 11, 2023 · pp. 28–37 Read article
-
Enhancements in Titanium Matrix Composites: A Multifaceted Exploration of Various Structural Ceramics Reinforcement
Abstract: This research study delves into the comprehensive exploration of Titanium Matrix Composites (TMCs) reinforced with Silicon Carbide (SiC), Alumina (Al2O3), and Boron Nitride (BN). The investigation is structured into three key phases, each addressing essential aspects of TMCs: Phase 1 involves materials and manufacturing, where TMC coupons were fabricated through the stir casting technique with varying compositions of aluminum and silicon carbide. Phase 2 focuses on characterization and defect detection, …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 83–94 Read article
-
Mechanical Characteristics of Naturally Woven Coconut Sheath/Short Sisal Fiber Reinforced Polymer Hybrid Composites
Abstract: This study presents the outcomes of an experimental investigation focusing on the tensile, flexural, impact and water absorption properties of unsaturated polyester resin reinforced with naturally woven coconut sheath and short sisal fibers. Sisal fiber, characterized by its abundance, affordability, degradability, and robust strength, serves as a compelling reinforcement. The naturally woven coconut sheath fibers, discreetly found in the hidden sections of coconut branches, offer an inexpensive, biodegradable option with …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 34–44 Read article
-
Properties and antimicrobial activity of bacterial nanocellulose composite incorporated with silver nanoparticles based on green synthesis
Abstract: Green silver nanoparticles (AgNPs) synthesized using medical plant extracts as capping and reducing agents demonstrate broad applicability in addressing the threat posed by infections. In this study, we present a sustainable, low-toxicity, and cost-effective bacterial nanocellulose composite with silver nanoparticles based on green synthesis that uses Origanum vulgare as a reducing agent due to numerous biological components. The formation of AgNPs in composite and morphological properties was analyzed using scanning …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 323–328 Read article