Search
71 articles for “Relative velocity”
-
Optimized Utilization of Kota Stone Slurry Waste in Fly Ash–Based Geopolymer Mortar: A Taguchi-Driven Approach
Abstract: The large-scale generation of stone-processing wastes presents a critical sustainability challenge and an opportunity for value-added reuse in construction materials. This study develops a high-performance fly ash geopolymer mortar by partially replacing Class F fly ash with Kota stone slurry waste (KSSW) and optimizing the key mix parameters using a Taguchi design framework. Five governing factors—binder replacement level, NaOH molarity, sodium silicate–to–sodium hydroxide ratio (SS/SH), curing temperature, and alkaline solution-to-binder …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 426–445 Read article
-
Applications of CFD in Car Design
Abstract: Development of computational fluid dynamics has now reached a state of maturity, which enables it to stimulate the flow of past practical car design configurations. It can thus play a very useful role in car design and development. CFD codes can be used to determine different loads on car and thus provide necessary input for the structural design. They can also be used to study and optimize the flow patterns …
Published in Recent Trends in Fluid Mechanics · Vol. 2, Issue 1, 2015 · pp. 26–30 Read article
-
Investigation of Sulphate, Alkali and Carbonation Chemical attack in GGBS-Based Geopolymer Concrete and OPC Concrete
Abstract: This study presents a comparative evaluation of the durability of GGBFS-based Geopolymer Concrete (GPC) and OPC concrete in rapid carbonation, sulphate, and alkali environments. All samples were subjected to three severe conditions are carbonation at 4% CO₂, 25°C and 60% relative humidity, exposure to a 10% sodium sulphate (Na₂SO₄) solution, and immersion in a 10% sodium hydroxide (NaOH) solution for alkali resistance. The durability characteristics were evaluated by the compressive …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 13–35 Read article
-
A Review on Modification and Experimental Analysis of Fluidized Bed Gasifier for Quality Enhancement of Producer Gas
Abstract: In this global world, energy crisis is increasing day by day, but fulfilling of that energy by conventional energy generation produces pollution problem and it is also costly. There are million tons of waste biomass like rice husk, sawdust, bagasse, straw, and groundnut shell powder available in powdered forms, which are converted in to producer gas used to generate energy by fluidized bed gasifier. There are various input parameters like …
Published in Journal of Thermal Engineering and Applications · Vol. 3, Issue 2, 2016 · pp. 9–17 Read article
-
Application of ANSYS in heat transfer characteristics of straight hollow tubes
Abstract: The mess analysis of straight hollow tubes have been done by many analysis software but out of all ANSYS be considered as the better due the provision of change in parameters. Therefore in the present study, ANSYS Fluent is used for the analysis of the straight tubes. ANSYS Workbench is used for the analysis. Geometry tool Design Modeler is then applied for the design of the tubes. The solution of …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 10, Issue 1, 2023 · pp. 41–52 Read article
-
Experimental Analysis of Glass Fiber Composite on Low Velocity Impacts
Abstract: This research specifically deals with determining the retained tensile strength after loading Glass Fiber Reinforced Polymer (GFRP) composites following low-velocity impact. The purpose is to determine the degree to which these impacts affect the structural performance and mechanical integrity of GFRP materials. Experimental tests were conducted on glass fiber composite specimens in order to observe variation in tensile strength upon impact. The results indicated significant tensile strength reduction in impact …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 789–796 Read article
-
Review on Main Equations for Measuring Spray Properties in Centrifugal Injectors
Abstract: The method of fuel injection has a significant effect on the stability and proper mixing of fuel and oxidizer, which is done by the injector. In other words, the injector is a device that converts fluid into droplets. The faster and better the particle crushing rate, the faster the fluid particles will evaporate, resulting in higher thermal efficiency and higher thrust force. Therefore, how to inject fuel into the combustion …
Published in Journal of Industrial Safety Engineering · Vol. 8, Issue 3, 2021 · pp. 17–23 Read article
-
Study on the Method of Constructing a System of Linear Equations for Calculating Aerodynamic Derivatives
Abstract: The aerodynamic derivatives can be calculated from the unsteady hydrodynamic forces experienced by the harmonic-oscillating vehicle. Until now, unsteady flow field analysis in aerodynamic derivative calculations has been applied mainly to thin bodies based on potential theory MSC. Nastran is a typical application based on potential theory MSC. Natran can calculate the aerodynamic derivatives of the vehicle relatively well in the subsonic region, but in the supersonic region, the fuselage …
Published in Journal of Experimental & Applied Mechanics · Vol. 16, Issue 3, 2025 · pp. 14–24 Read article
-
Tribological Behaviour of PTFE based Composite Materials with Different Filler Materials: A Combine Numerical and Experimental Approach
Abstract: This study investigates the tribological behaviour of Polytetrafluoroethylene (PTFE) composites reinforced with various fillers, utilizing the Archard wear model to analyse wear mechanisms and predict wear rates. PTFE is widely recognized for its excellent chemical resistance and low friction, but its inherent wear resistance is relatively poor. To enhance its tribological properties, fillers such as glass fibres, carbon fibres, bronze, and graphite were incorporated into the PTFE matrix. In the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 547–557 Read article
-
Comparative CFD Analysis of Major and Minor Aerodynamic Modifications for Tall Building Shapes under Wind Loading
Abstract: Aerodynamic performance of tall buildings is significant to structural safety and serviceability under wind. The major and minor aerodynamic changes of the tall building shape are compared with the computational fluid dynamics (CFD) simulation. The base model was a rectangle of 75 m × 75 m × 300 m. Various aerodynamic modifications of shapes were examined: circular, elliptical, tapered, twisted, rounded-corner, and chamfered-corner shapes. Simulations were carried out in the …
Published in Journal of Offshore Structure and Technology · Vol. 13, Issue 2, 2026 · pp. 9–35 Read article
-
Investigation of the Control Parameters in the Machining of Inconel 718 with a carbide tool using Taguchi methodology
Abstract: The main objective of proposed work is to determine the influence of controllable parameters on machining characteristics of Inconel-718 and to achieve the optimum parameters for efficient milling. The Taguchi methodology is adopted for the design of experiments and process optimization. The paper gives an understanding of the different controllable cutting parameters such as cutting velocity, feed rate and depth of cut. It discusses about the carbide tool being used …
Published in Trends in Mechanical Engineering & Technology · Vol. 8, Issue 2, 2018 · pp. 73–76 Read article
-
Analyzing Cavitation in Marine Propeller: A Computational Approach with Consideration for Polymer Applications
Abstract: A major source of noise and blade damage in marine propellers is because of the phenomenon of hydrodynamic cavitation. The Computational Fluid Dynamics (CFD) analysis approach is employed for the prediction of the cavitating propeller’s performance characteristics under various conditions of operation with the advance coefficient (J) ranging from 0.55 to 0.91 and cavitation number (σ) in the range of 0.80 to 4.50. The numerical simulation is performed on INSEAN …
Published in Journal of Polymer & Composites · Vol. 12, Issue 8, 2024 · pp. 29–44 Read article
-
A Brief Introduction on the Electrokinetic Mixing and Separation in Microfluidic Systems
Abstract: Electrokinetics encompasses the analysis of fluid or particle motion in the electrical field; includes electroosmosis, electrophoresis, dielectrophoresis, electro-wetting, etc. Electrokinetic applications in the production of microfluidic systems have become quite attractive over the last decade. Electro-kinetic systems usually do not need any additional mechanical moving parts and may be made compact by removing the power source with a small battery. Electro-kinetic based microfluidic systems may also serve as a feasible …
Published in Journal of Aerospace Engineering & Technology · Vol. 10, Issue 3, 2020 · pp. 24–34 Read article
-
Damage Detection And Its Repair And Rehabilitation Techniques In RCC And Steel Structures Using NDT
Abstract: In the paper along with Case studies Buildings and structures are normally designed for a specified target life based on the functional and economical aspects. It is due to the fact that the assumptions are made regarding durability of material without knowing the behaviour of material completely in real environment. The various tests are to be carried out to assess the causes & extent of distress, the quality/strength of concrete …
Published in Journal of Structural Engineering and Management · Vol. 5, Issue 2, 2018 · pp. 64–68 Read article
-
Experimental Set Up of Optical Tomography Probe and Visualization of Characteristics of a Taylor Bubble
Abstract: Abstract Conventional methods for the detection of bubbles uses probes which physically protrude into the flow field and thus may affect the flow dynamics, thereby tethering the formation, development and flow of bubbles. In thermal power plant, it is rather difficult to physically see which type of two phase flow is happening in the pipe. In such a case, an optical tomography sees its application. Depending upon the type of …
Published in Recent Trends in Fluid Mechanics · Vol. 3, Issue 3, 2016 · pp. 1–14 Read article
-
A Review on Effect of Cryogenic Treatment on Wear Resistant Bearing Materials for Automotive Application
Abstract: Cryogenic processing has come as a successful supplementary process to common heat treatment, especially in improving the wear-resistant performance of materials employed in in-vehicle applications. This sub-zero processing is normally performed following quenching and before tempering, during which materials are subjected to extremely low temperatures, typically around -196°C, for prolonged periods of 24 hours. Cryogenic treatment, which involves subjecting materials to extremely low temperatures, has demonstrated promising results in changing …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1–11 Read article
-
BIOCHEMICAL AND KINETICS STUDIES ON PROTEASE ENZYME ISOLATED FROM AYURVEDIC HERBS ALONG WITH THEIR APPLICATION STUDIES
Abstract: The objective of the present work was to conduct comprehensive biochemical and kinetic analysis of a protease enzyme extracted from two Ayurvedic herbs, namely Shankhpushpi (Convolvulus prostratus) and Mulethi (Glycyrrhiza glabra). The primary focus was to characterize various biochemical aspects of the enzyme, encompassing substrate specificity, optimal pH and temperature conditions, stability, and activation energy. Furthermore, crucial kinetic parameters such as Michaelis-Menten constant (Km) and maximum reaction velocity (Vmax) were …
Published in Research and Reviews : A Journal of Biotechnology · Vol. 13, Issue 3, 2023 · pp. 21–37 Read article
-
Numerical and Experimental Investigation of AlHE30 for Rectangular Finned Cooking Vessel
Abstract: AbstractFins are basically extended surface, which is used to increase the heat transfer rate, this is basically a secondary surface mounted on primary surface to augment heat transfer from it. A numerical study using ANSYS were conducted to optimize fin shape based on base temperature and maximize the heat transfer across the cooking vessel. By investigating fin of (AlHE30) material were conducted experiments the fin of diameter 14 and 195 …
Published in Journal of Thermal Engineering and Applications · Vol. 5, Issue 1, 2018 · pp. 28–36 Read article
-
Performance Improvement of Nano Field Effect Transistor Based on Zinc Oxide Semiconducting Materials – a Critical Analysis
Abstract: New semiconductor materials and new shapes for contemporary nanostructured semiconductor devices, like nanowires, have been researched as a result of advancements in transistor technology. Because of their unique electrical, photonic, and sensing capabilities, nanowires (NWs) constructed of various semiconductor material systems (gallium arsenide, zinc oxide, etc.) have been the subject of intense research over the past 20 years. Due to its distinctive properties, including high electron mobility, high crystalline quality, …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 99–107 Read article
-
ENERGY LOSSES IN FLOATING OFFSHORE WIND TURBINE WITH VARIABLE WIND DIRECTION
Abstract: The paper analyses the effects of the variation of wind direction onto the performance of a floating offshore wind turbine (FOWT). The evolution of the Cp coefficient is developed as a function of the velocity of the yaw angle correction when realigning the FOWT after a wind direction change. The results are computed for velocities correction of the yaw angle between 1º/min and 5º/min. A maximum drop of the Cp …
Published in Journal of Offshore Structure and Technology · Vol. 9, Issue 1, 2022 · pp. 1–16 Read article