Search
141 articles for “Porosities”
-
An Optimize Formulation to Synthesis of size Controlled Hydrophobic Starch Acetate Nanoparticles using Box- Behnken Design
Abstract: The best way to improve the overall performance of native starch is by chemical modification. In recent years, hydrophobically modified starch has attracted considerable attention for the design and manufacture of novel nanoparticulate drug delivery carriers. The purpose of this research was to synthesize hydrophobic starch nanoparticles (NPs) and to optimize process factors through the use of response surface methodology (RSM). The corn starch acetate (CSA) NPs was synthesized using …
Published in Journal of Polymer & Composites Read article
-
Dye Sensitized Solar Cells Based on Extracted Natural Dyes and Synthetic Dyes with Nanocomposite Material
Abstract: Producing dye sensitised solar cells in their original colours required a number of different techniques. Plants and berries were used to extract these dyes. The DSSCs were manufactured by recycling the old dyes. It was clear that the efficiency of the power conversion was deteriorating. TiO2 mesoporous films' potential applications were also studied. This study employed electrochemical impedance spectroscopy to examine the interactions of natural dyes with TiO2. Bi2O3 nanoparticles …
Published in Journal of Polymer & Composites Read article
-
Experimental Analysis of Nano-carbon Doped Alumina for Industrial Applications
Abstract: The use of nano-carbon metal matrix composites can provide a solution to the enduring issue of optimal material selection and optimization for getting metal-insulator transition (MIT) behavior at a particular frequency at ambient temperature. Other substances, like two-dimensional (2D) transition metal dichalcogenides (TMD), vanadium oxide (VO2), and germanium telluride (Ge-Te), have difficult challenges in achieving effectively the MIT property at a given frequency and temperature. It is also difficult to …
Published in Journal of Polymer & Composites Read article
-
Characterization of Fracture Toughness of As-Cast Si-Mo- Cr Ductile Cast Iron
Abstract: In the present study, a Si-Mo-Cr ductile cast iron is developed by taking three different combinations, viz. Heat-1, Heat-2 and Heat-3 of the selective amount of silicon, molybdenum, copper and chromium. For fracture toughness characterization, the specimens are prepared from the samples in "as-cast" conditions. The value of static fracture toughness obtained from the experiments for the specimen of Heat-2 with a fatigue pre-crack is 54.49 MPa√ , whereas, for …
Published in Journal of Polymer & Composites Read article
-
Influence of Crystallization Time by Hydrothermal Synthesis of Ag NPs-Zeolite Composite
Abstract: Inorganic molecules undergo a chemical reaction that results in the production of a brand-new building material known as geopolymer concrete. Otherwise known as an inorganic aluminohydroxide polymer, geopolymer is made mostly from by-products like fly ash and geologically derived silicon (Si) and aluminium (Al). It is a superior building material for the future because of its great mechanical qualities, significant chemical resistance (attack by magnesium or sulphate), low shrinkage and …
Published in Journal of Polymer & Composites · Vol. 11, Issue 1, 2023 · pp. 46–51 Read article
-
Preparation and Characterization of TiO2 Nanoparticles by Green Method
Abstract: In this study, we attempted to synthesize TiO2 nanoparticles utilizing titanium tetrachloride as a precursor and an aqueous extract of Sansevieria plant leaves. Atomic force microscopy (AFM), X-ray diffraction (XRD) pattern, scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, and Brunauer-Emmett-Teller (BET) analysis were used to identify the synthesized TiO2 nanoparticles As per the surface topography, the average diameter of nanoparticles is considered as 67.73 nm. Debye-Scherrer equation was …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 61–67 Read article
-
Evaluation of Inhibition Effect of Nanohybrid Curcumin (Cur-ZnO) and Cur-free Against Some Types of Bacteria
Abstract: This study aimed to prepare an efficient nanohybrid food preservative by loading curcumin on zinc oxide. The prepared compound was characterized using microscopy and spectral methods. Fourier transform infrared spectrum of the nanohybrid curcumin showed a shift in the frequencies of some chemical groups towards high and low frequencies. X-ray diffraction (XRS) spectrum also revealed the emergence of new diffraction planes in the nanohybrid compound, Compared with the carrier spectrum …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 68–79 Read article
-
Characterization of Al6082 and Magnesium AZ3lB Composite Produced by The Friction Stir Additive Manufacturing
Abstract: In this modern era, lighter and stronger materials are needed. This is especially true for materials needed in aerospace, robotics, light aircraft, defence, and transportation. When comparison to backbone products in order composite goods have a higher durability & stiffness-to-weight proportion .Most of the newer fabricating methods, called friction stir additive manufacturing (FSAM), uses solid-state drives friction stirring technology to produce bilayer structures by sequentially fusing discrete strata. In this …
Published in International Journal of Manufacturing and Production Engineering · Vol. 1, Issue 1, 2023 · pp. 1–14 Read article
-
A Comprehensive Review of Concrete Containing Magnetically Treated Water
Abstract: In Present scenario, Construction has benefited greatly from the characteristics of concrete and the magnetism of water. The procedure of permitting water to pass through the magnetic field is part of creating magnetised water, utilizing those properties of concrete that can affect such as compressive strength, workability, porosity, permeability, durability, water absorption capacity, hydration rate and aqueous ratio. Reduced cement usage and improved mechanical and technical qualities of concrete are …
Published in Journal of Polymer & Composites · Vol. 11, Issue 1, 2023 · pp. 52–64 Read article
-
Numerical Simulation of Transient Free Convection in a Rectangular Cavity Filled with Porous Material Using Finite Element Formulations
Abstract: In this study, the finite element method is used to quantitatively explore transient free convection in porous cavities in order to understand the flow characteristics and heat conduction processes in the square cavities. In comparison to an uniform temperature gradient, the left wall is swiftly heated and the right wall is allowed to cool to a specific temperature. The horizontal walls are insulated on both sides. Dimensionless representations of the …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 1–10 Read article
-
A Ponder & Sedulousness Of Legion Shale Stabilizing Materials In Aqueous Based Drilling Fluid During The Process Of Borehole Strengthening
Abstract: Drilling fluid used while drilling the layers of shale will have the potential of reacting with water which tends to increase stickiness, induce swelling and promote sloughing of the borehole. This results in the reduction of drilling fluid circulation, increased mud loss, increase in torque and drag, reduction in lubricity. This will ultimately result in the increase of Non-Productive Time (NPT) during drilling which in turn increases Capital Expenditure (CAPEX) …
Published in International Journal of Pollution: Prevention & Control · Vol. 1, Issue 2, 2023 · pp. 35–40 Read article
-
Injection Parameters Setting in High-Pressure Die Casting
Abstract: The advancement of science and processing technology is highly essential for the development of human civilization for a better life. Mass production leads to the availability of goods at a lesser price. Aluminium die-cast components are widely used in the automobile, aerospace, and consumer goods market. Proper process parameters are required to produce components with minimum rejections and scrap. This paper studies optimum injection parameters to produce components without defects. …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 135–142 Read article
-
Enhancing Compressive Strength and Durability through Optimization of Concrete Mixtures
Abstract: This research investigates how varying cement-aggregate ratio, water-cement ratio, and slump height affect the compressive strength of concrete mixtures. Through an analysis of 36 samples, each representing different combinations of these parameters, significant insights are gained into the optimization of concrete mix designs for construction applications. The study reveals that higher water-cement ratios tend to decrease compressive strength due to increased porosity in cured concrete. Conversely, higher cement-aggregate ratios generally …
Published in Journal of Geotechnical Engineering · Vol. 11, Issue 1, 2024 · pp. 1–12 Read article
-
Enhancements in Titanium Matrix Composites: A Multifaceted Exploration of Various Structural Ceramics Reinforcement
Abstract: This research study delves into the comprehensive exploration of Titanium Matrix Composites (TMCs) reinforced with Silicon Carbide (SiC), Alumina (Al2O3), and Boron Nitride (BN). The investigation is structured into three key phases, each addressing essential aspects of TMCs: Phase 1 involves materials and manufacturing, where TMC coupons were fabricated through the stir casting technique with varying compositions of aluminum and silicon carbide. Phase 2 focuses on characterization and defect detection, …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 83–94 Read article
-
A Review of Recent Advancements in the Field of Friction Stir Welding of Dissimilar Joints Made of Aluminium and Magnesium
Abstract: Friction stir welding (FSW) stands at the forefront of welding technology, offering a promising avenue for joining dissimilar metals like aluminum and magnesium. These metals, renowned for their exceptional properties such as ductility, thermal conductivity, low density, and impressive weight-to-strength ratios, find wide utility across numerous industrial sectors. However, traditional fusion welding methods often struggle to effectively join aluminum and magnesium due to their disparate physical and chemical characteristics. FSW …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 134–142 Read article
-
Computational investigation of the influence of process parameters of 3D printed PLA material
Abstract: This study uses numerical simulation to examine the relationship between critical process parameters say, feed rate, layer height, and raster angle, on residual stresses and distortions and on the achievable density of FFF prints to identify the optimal input parameter combinations for ISO 527-2 type 1A. Methods of additive manufacturing that are utilised widely used to manufacture thermoplastic parts is fused filament fabrication. High residual stresses are one of the …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 259–269 Read article
-
Effects of Soil and Water Conservation Measures on Selected Physico-Chemical Properties of Soil in Qenshiben Watershed Central Ethiopia Regional State
Abstract: One of the main causes of declining soil resources in Ethiopia has been identified as soil erosion, which in turn negatively affects the agricultural productivity of the country. In order to alleviate the problem of soil erosion, numerous soil and water conservation measures have been implemented during the past ten years in numerous parts of the country through community mass mobilization. In spite of the fact that conservation measures had …
Published in Research & Reviews : Journal of Agricultural Science and Technology · Vol. 13, Issue 1, 2024 · pp. 23–32 Read article
-
Hydrogel Membranes for Skin Moisturization and Hydration: A Comparative Study
Abstract: Hydrogel membranes have emerged as a revolutionary technology in skin care, particularly for moisturizing and hydration applications. These water-swellable polymers mimic the extracellular matrix, providing an ideal environment for skin nourishment and moisture retention. This review comprehensively explores the various types of hydrogel membranes, including natural, synthetic, and hybrid formulations, highlighting their physicochemical properties, mechanisms of action, and applications in skin care. We examine how factors such as crosslinking density, …
Published in Recent Trends in Cosmetics · Vol. 1, Issue 1, 2024 · pp. 13–22 Read article
-
Understanding Side-wind Dynamics and Deciphering Ringsail Parachute Drift
Abstract: The geometric complication caused by the "rings" and "sails" used to make the parachutist's canopy provides a considerable computationally problem, which is the focus of this paper's fluid–structure interaction (FSI) modeling of ringsail parachutes. Based on the sustained space-time FSI (SSTFSI) method, we have developed an FSI simulation of ringsail jumping devices. The FSI Geometric Smoothing Technique and the Homogenized Modeling of Geometric Porosity represent a pair of the above …
Published in Journal of Experimental & Applied Mechanics · Vol. 15, Issue 1, 2024 · pp. 1–12 Read article
-
Parametric Optimization of Biocompatible Ti6AL4V Alloy on Selective Laser Melting for Enhanced Structural Support and Reduced Stress Shielding
Abstract: The Selective Laser Melting technique is widely employed in the production of complexly shaped end products for a range of industries, including biomedical, aerospace, automotive, and defence. SLM is a complicated manufacturing process since a lot of factors influence the characteristics of the items that are printed using it. The SLM printing of fully dense parts is becoming more and more popular for various high-end applications. Because of their biocompatibility …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 143–156 Read article