Search
591 articles for “Particles”
-
Fatigue Test on Cost Effective Aluminium Metal Matrix Composite Prepared from Discarded Toner Powder and Coconut shell Ash Particles
Abstract: AbstractAs there is an increasing demand for low cost reinforced composite materials in various industrial applications, in this work Aluminium Metal Matrix Composite was prepared by reinforcing cost effective reinforcements like discarded tonner powder particles and coconut shell ash. Aluminium 2024 was taken as the base matrix for preparing the composite as it is widely used in automobile industry. The samples taken for the investigation were prepared by two step …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 5, Issue 3, 2018 · pp. 15–20 Read article
-
Short Review on the Particle Image Velocimetry in Fluid Mechanics
Abstract: In this short review, the reports by few authors on particle image velocimetry are briefly described. The features of particle image velocimetry are briefly mentioned. Also, in this short review, an experimental demonstration on microfluidic flow is presented by Mukhopadhyay as author. A single microchannel bend is fabricated by microfabrication techniques. Dyed water is prepared as working liquid. The surface-driven capillary flow of dyed water is recorded and shown corresponding …
Published in Recent Trends in Fluid Mechanics · Vol. 7, Issue 3, 2020 · pp. 10–14 Read article
-
ATC Calculation in OPF Environment Using Hybrid Grey Wolf Optimizer and Particle Swarm Optimization
Abstract: Evolution of hybrid optimization provides new research direction in the real world problem solving by using more than one optimization techniques for obtaining speedy convergence and/or global optimal solution or solution near the global optimal. In this paper, a novel hybrid particle swarm optimization (PSO) and grey wolf optimizer (GWO) technique is used to calculate the available transfer capability in an optimal power flow environment. The proposed method has been …
Published in Trends in Electrical Engineering · Vol. 6, Issue 1, 2016 · pp. 84–93 Read article
-
Effect of Particle Size of Sand on the Interface Shear Behavior of Sand and Non-woven Geotextile
Abstract: Soil-geosynthetic interface is the weakest zone for shear failure. It is influenced by size, shape, density and water content of sand. It is also influenced by the properties of geosynthetic such as texture and structure. This paper explores the influence of the size of sand on the behavior of sand-geotextile interface. Three types of sands namely coarse, medium and fine sand and non-woven geotextile were used in this study. Several …
Published in Journal of Geotechnical Engineering Read article
-
A Comparative Study of Zinc Oxide Nano Particles Synthesized by Hydrothermal, Sol-gel and Thermal Decomposition
Abstract: In the proposed work, Zinc oxide nano particles (ZnO NP's) are synthesized using three different methods: Hydrothermal, Sol-gel and Thermal decomposition. The samples are characterized using X- ray diffraction (XRD), UV visible spectroscopy (UV-Vis), Fourier Transform Infrared Spectroscopy (FT-IR) and scanning electron microscopy (SEM). The XRD pattern exhibit single-phase polycrystalline nature of all the samples exhibiting the most intense peak at (101). The diffraction peaks are located at 31.80, 34.46, …
Published in Journal of Polymer & Composites · Vol. 11, Issue 7, 2023 · pp. 39–45 Read article
-
Influence of Carbonyl Iron Particle Loading on the Dimensional and Rheological Properties of 4D-Printed TPU-Based Magnetorheological Elastomers
Abstract: The advancement of 4D printing technologies has created new opportunities for fabricating smart materials with tunable properties, including magnetorheological elastomers (MREs). This study investigates the fabrication and characterization of thermoplastic polyurethane (TPU)-based MREs with varying carbonyl iron particle (CIP) loadings (10–50 wt.%) using the fused filament fabrication (FFF) method. MRE filaments were produced through a solvent-assisted mixing and extrusion process, ensuring consistent diameters within 1.75 ± 0.10 mm. Test specimens …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 127–138 Read article
-
Study of an Improved Quantum Particle Swarm Optimization-Based Framework for Neural Network Optimization in Modelling of Polymer Data
Abstract: The accurate forecasting of polymer viscosity at various physicochemical conditions has been quite critical due to the nonlinear interactions and interrelations between the variables. This paper suggests a better hybrid modelling framework, which involves the use of Artificial Neural Networks (ANN) and more advanced versions of Quantum Particle Swarm Optimization (QPSO) to better predict polymer viscosity. The input parameters taken are, namely, log (shear rate), polymer concentration, NaCl concentration, Ca …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 282–297 Read article
-
Multi-Objective Particle Swarm Optimization based PID Tuning of Ball and Beam System
Abstract: Ball and beam system is an unstable and nonlinear system which is specially designed for understanding various control engineering problems. The proportional integral and derivative (PID) controller is mostly used to stabilize the ball on the beam. Initially, Skogestad internal model control (SIMC) tuning method is used to design the PID controller for stabilizing the ball at desired position on the beam. The parameters of PID controller decide the performance …
Published in Journal of Control & Instrumentation · Vol. 7, Issue 1, 2016 · pp. 35–40 Read article
-
A POLYESTER RESIN COMPOSITE-BASED EXPERIMENTAL INVESTIGATION OF CHARCOAL PARTICLE REINFORCED GLASS FIBRE
Abstract: The mechanical characteristics of jute/E-glassfibre polyester composites were examined (AC) after theincorporation of activated carbon particles. The polyestermatrix was loaded with five different particle loading ratios(0, 5, 10, 15 and 20 percent). To increase the adhesion of jutefibres to the polyester matrix, they were treated in a NaOHsolution. Hardness, tensile, and water absorption tests wereperformed on polyester, Activated Carbon- filled polyesterand jute/E-glass fibers polyester with and without ActivatedCarbon filter. The …
Published in Journal of Experimental & Applied Mechanics · Vol. 14, Issue 1, 2023 · pp. 57–62 Read article
-
Effect of Particle Size of Sand on the Interface Shear Behavior of Sand and Non-Woven Geotextile
Abstract: Soil-geosynthetic interface is the weakest zone for shear failure. It is influenced by size, shape, density and water content of sand. It is also influenced by the properties of geosynthetic such as texture and structure. This paper explores the influence of the size of sand on the behavior of sand-geotextile interface. Three types of sands namely coarse, medium and fine sand and non-woven geotextile were used in this study. Several …
Published in Journal of Geotechnical Engineering · Vol. 8, Issue 3, 2021 · pp. 44–54 Read article
-
Reactive Power Optimization using Particle Swarm Optimization with Time Varying-Acceleration Coefficient
Abstract: This paper presents an approach for the solution of reactive power optimization problem. In deregulated power system operations, reactive power optimization helps the system operator to maintain system security with the economy. The application of the time-varying acceleration constant-particle swarm optimization (TVAC-PSO) method for the solution of this problem is emphasized. The real power losses of the system are minimized satisfying power balance, generator reactive power operating limit and voltage …
Published in Journal of Power Electronics and Power Systems · Vol. 8, Issue 2, 2018 · pp. 1–10 Read article
-
A Comparative Study on Particle Swarm Optimization for Transmission Congestion Management
Abstract: This research aims to propose solution to the issue of transmission congestion management based on optimal generation rescheduling using different variants of particle swarm optimization (PSO). In deregulated electricity market era, congestion management plays an essential role to accommodate all transactions within reliable system operations. Intending to reduce the congestion cost, optimum numbers of generators are selected based on generator sensitivity factor (GSF) to perform active power generation rescheduling. The …
Published in Journal of Power Electronics and Power Systems · Vol. 6, Issue 1, 2016 · pp. 86–93 Read article
-
Determination of the Optimal Generation Location using Particle Swarm Optimization
Abstract: This paper presents an optimization approach to determine the optimal location for installing a new generator in which the technical, economic and environmental aspects are all taken into consideration. The location that yields the minimum fuel costs, emission and system loss is considered as the optimal generation location. The formulated objective function and its constraints compose an optimization problem, which is solved using particle swarm optimization (PSO). The proposed PSO-based …
Published in Journal of Power Electronics and Power Systems · Vol. 2, Issue 2, 2012 · pp. 34–44 Read article
-
Optimization of ED Problems of Interconnected Power System Using Particle Swarm Optimization
Abstract: This paper proposes an effective and useful evolutionary-based method to solve the economic load dispatch (ELD) problem. This paper introduces particle swarm optimization (PSO) technique for solving the economic dispatch (ED) problem in power system. ELD problem is really the solution of a large number of load flow problem with equality & inequality constraints. In this paper, a PSO technique for solving the ELD problem in power system is proposed. …
Published in Journal of Power Electronics and Power Systems · Vol. 5, Issue 1, 2015 · pp. 1–8 Read article
-
Reliability Optimization of Radial Distribution Systems Considering Failure Rate and Repair Time Earmarking using Languid Particle Swarm Optimization (LPSO)
Abstract: In this paper a methodology for reliability improvement of radial distribution system by establishing optimal values of repair times and failure rates is considered. Objective function related to failure rates and repair times is been designed. Constraints are taken based on customer and energy based indices. Languid Particle Swarm Optimization (LPSO) a variant of Particle Swarm Optimization (PSO) has been used as optimization technique. The method is implemented on radial …
Published in Journal of Power Electronics and Power Systems · Vol. 12, Issue 1, 2022 · pp. 16–21 Read article
-
Reservoir Operation Using Particle Swarm Optimization
Abstract: Ideal operation of the reservoir is thoughtful in the current circumstances of water deficiency being faced by the country, due to perceivable universal increase in the water demand for numerous requirements. Water resources projects required enormous funds, money and manpower to reach the desired objective and operate the reservoir in best way a reservoir operation is needed. Depending upon reservoir characteristics and need of surrounding area it is required to …
Published in Journal of Water Resource Engineering and Management · Vol. 5, Issue 3, 2018 · pp. 1–7 Read article
-
Numerical Simulation of Multiple Objective Power Flow Optimization in IEEE-30 Bus System Using Improved Particle Swarm Optimization
Abstract: OPF algorithms are an important research topic for the management and orchestration of profitable power structures. Perfect Power Flow is used to limit the objective work. This goal cap can be a single goal or various aim limits. In this study, we have carried out a perfect energy stream to limit the cost of fuel while fulfilling limitations, such as the tension and the electricity yields of the generator, which …
Published in Recent Trends in Electronics Communication Systems · Vol. 8, Issue 2, 2021 · pp. 23–28 Read article
-
Homogeneous and Heterogeneous Analysis of Water and Ethylene Glycol Based Cu Nano-particle
Abstract: The flow of heat in water Ethylene glycol (C2H6O2) copper based small size particles between two parallel freezing discs along with homogeneous and heterogeneous reactions are greatly and heavily affected by magnetic field. Here, I have considered Magnetic Hydro Dynamics effect perpendicular to the plane surface, while, bottom disk will be considered to be porous. The basic equations such as Navier-stokes, energy, Homogenous and Heterogonous reactions will be used for …
Published in Recent Trends in Fluid Mechanics · Vol. 9, Issue 3, 2022 · pp. 44–55 Read article
-
Microstructural and Mechanical responses of Al6061 alloy matrix composite reinforced with yttria particles
Abstract: The increasing need for materials that can improve the overall performance of automotive and aerospace components has driven the development of composite materials. Aluminium Metal Matrix Composites (AMMC) have become a popular alternative due to their ability to satisfy the changing needs of industries. This study investigates the mechanical characteristics of AMMC (Aluminium Matrix Metal Composite) made using the stir casting method. The study examines the effects of different amounts …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 246–252 Read article
-
Particle Size Effect on the Physicochemical Parameters of Water Media in Treatment of Contaminants of AGO and PMS
Abstract: Some of the physicochemical properties of contaminated water media with AGO and PMS was monitored upon the particle size effect and mix ratio. The physiochemical parameters monitored are potassium ammonia, iron and manganese concentration upon the performance of the formulated adsorbent immersed in the salt water and fresh water medium. The investigation demonstrates the occurrence of leaching in the process, which shows that some of the parameters adsorbed by the …
Published in Journal of Petroleum Engineering & Technology · Vol. 14, Issue 2, 2024 · pp. 27–36 Read article