Search
1953 articles for “NBR/CR blends” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
Nothing matched all of your words, so these match any of them.
-
Designing and CFD Analysis of Table Top Refrigerator Hexagonal Coil Crossection
Abstract: In the Present study CFD analysis has been performed on evaporator unit. Tabletop refrigerators are the common house hold unit used in almost all houses. Evaporator and Condenser unit is the main functioning unit of refrigerator system used for the cooling applications. With the increase of modernization use of refrigerator system has rapidly increases due to the reason a lot of researches are prevailing on refrigerator systems. With the updating …
Published in Journal of Thermal Engineering and Applications · Vol. 6, Issue 2, 2019 · pp. 34–51 Read article
-
Investigation of Characteristics of Vernonia amygdalina Stem on Remediation of Crude Oil Polluted Loamy Soil Environment
Abstract: The effectiveness of Vernonia amygdalina in Total Petroleum Hydrocarbon (TPH) mitigation in a loamy soil environment was monitored using mixture of 100ml of Crude oil, 2kg of loamy soil and 25g to 100g of remediant determined. The experiment was set-up based on the design concept considered as presented in this research, which involved constant volume of 100ml of crude oil, constant mass of 2kg of loamy and changes in mass …
Published in Emerging Trends in Chemical Engineering · Vol. 10, Issue 2, 2023 · pp. 23–30 Read article
-
An experimental study of Resistance Spot Welding with CRCA sheet
Abstract: Resistance Spot Welding is prime process in automotive industries for joining metal sheets. Different materials are used for making automobile body. Now-a-days, cold rolled closed annealed(CRCA) sheets are used. In this paper, CRCA sheets for 1 mm. thickness is used for experimentation. D.O.E. is used and Input-output parameters are taken according to AWS D8.9M:2012 standard. Results are compared and final result having optimum output parameter is selected.
Published in Journal of Catalyst & Catalysis · Vol. 5, Issue 1, 2018 · pp. 1–8 Read article
-
Synthesis Effect of Natural/Chemical Blend Nanoparticles on Impact Strength of Sustainable Composite Material
Abstract: Synthesis effect of mixing two types of nanoparticles in the same matrix polyester based sustainable composite was studied in this article. The nanoparticles blend includes sunflower seeds and calcium carbonate with amount 1–3 wt.%. Results showed that the samples containing sunflower seed nanoparticles have high impact strength compared to the samples with calcium carbonate, and increases with increasing reinforcement ratio compared with sample having calcium carbonate nanoparticles. Keywords: Sustainable composite, …
Published in Journal of Catalyst & Catalysis · Vol. 4, Issue 1, 2017 · pp. 1–5 Read article
-
Drone-based Fire Detection and Crowd Management System using Image Processing
Abstract: AbstractNowadays, fire outbreaks are common issues which cause severe damage towards nature and human properties hence fire detection system are designed to discover fires early in their development when the time will still be available for the safe evacuation of occupants. Early fire detection in the event of an outbreak is pivotal to prevent loss of life and properties. Fire is necessary and profitable to humankind life, but it also …
Published in Journal of Electronic Design Technology · Vol. 10, Issue 2, 2019 · pp. 30–34 Read article
-
Supply Chain Management and Energy Credits in an Assembly Line Automobile Industry for System Optimization
Abstract: AbstractSupply chain management (SCM) is a vital factor to sustain organization in competitive world. In this respect, many organizations and scholars have performed to opt out factors that affect either positively or negatively on SCM. In today’s era, supply chain management has been mandatory in any automobile lines. Supply chain management concerns about the automobile lines in India. Supply chain management emerged in the Indian industries established new methodologies and …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 10, Issue 1, 2020 · pp. 30–54 Read article
-
Performance of Combined PV-Inverter System: Use of Amorphous and Crystalline Panels
Abstract: This paper is aimed at analyzing the performance of a combined PV-inverter system connected to an external load using either amorphous or crystalline photovoltaic modules. The analysis is based on previous theoretical analysis that uses the efficiency of the PV panel and of the DC/AC inverter as a key parameter. Different configurations using the same energy resource have been simulated to determine the efficiency of the PV panel, DC/AC inverter, …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 11, Issue 1, 2021 · pp. 6–21 Read article
-
Use of Multi Criteria Decision Making Methods in Assessment of Occupational Safety and Health
Abstract: Assessment of Occupational Safety and Health (OSH) of process plants is an important aspect in safety management. Quantitative assessment is necessary to compare the OSH status of different plants. For this purpose, usually, an evaluation team is constituted which evaluates the OSH performance based on the available OSH related information. The evaluation team arrives at a decision through discussions and mutual agreement. However, while working in a group, there always …
Published in Journal of Industrial Safety Engineering · Vol. 6, Issue 3, 2019 · pp. 25–34 Read article
-
Substrate Integrated Waveguide Bandpass Filter with Cross Slots and CSRRs
Abstract: AbstractA wide Bandpass filter using cross slots and CSRRRs at X-band is presented in this paper. Half power bandwidth of 2GHz is achieved with transmission zeros on both sides. The insertion loss in the entire band is better than -1dB. A flat group delay is observed in the entire passband.Keywords: Band pass filter, CSRR, SIW, SlotCite this ArticleP. M Anju, A.O Lindo, C.K. Aanandan. Substrate Integrated Waveguide Bandpass Filter with …
Published in Journal of Microwave Engineering and Technologies · Vol. 5, Issue 2, 2018 · pp. 1–4 Read article
-
Effect of Isothermal Ageing on Microstructure and Mechanical Behavior of 0.5Cr-0.5Mo-0.2V Low Alloy Steel
Abstract: Cr-Mo-V based low alloy steels are widely used in thermal power plants because of their ability to withstand elevated temperature and high pressure under continuous operation. With ferrite-pearlite and/or ferrite-bainite microstructures, these steels find their applications in boiler tubes, pressure vessels and steam turbines. Being cost effective is one of the important factors, which draws attention of many industrialists towards low alloyed steels over highly alloyed steels with austenitic matrix. …
Published in Journal of Materials & Metallurgical Engineering · Vol. 5, Issue 3, 2015 · pp. 7–14 Read article
-
Micro Crack Formation in High Frequency-Electric Resistance Welding
Abstract: The present paper discusses about the formation of micro cracks in base metal adjacent to the weld area during High Frequency-Electric Resistance Welding (HF-ERW) of 10'' outside diameter pipe. The micro crack formation has been analyzed with respect to chemical composition, microstructure, inclusion level, welding parameters and angle of weld flow lines.
Published in Journal of Materials & Metallurgical Engineering · Vol. 4, Issue 2, 2014 · pp. 32–39 Read article
-
Experimental Investigation on Machining of AISI 1045 Stainless Steel by using Cryogenic Cooling of Micro EDM Drilling Process
Abstract: In this experimental work, the cryogenic cooling of the Micro-EDM (µEDM) drilling process for improving the performance and quality of micro holes. The controllable parameters such as the current (Ip), pulse on time (Ton), Pulse off time (Toff) and gap voltage (Vg) were chosen for further investigation. The Taguchi L27 orthogonal array is preferred to achieve the best experimental runs. Case hardened AISI 1045 stainless steel is selected to perform …
Published in Journal of Materials & Metallurgical Engineering · Vol. 10, Issue 2, 2020 · pp. 21–37 Read article
-
Synthesis and Characterization of Bamboo-Supported Nano Zerovalent Iron (NZVI-AB) for Cr(VI) Sequestration
Abstract: Remediation of chromium contaminated sites present both technological and economic challenges, as conventional methods are often too expensive and difficult to operate. In this study, bamboo supported Zero-valent iron (Fe0) nanoparticles were synthesized, characterized, and were tested for removal of Cr(VI). Fe0 nanoparticles were synthesized by the reduction of ferric chloride with avocado polyphenols and characterized by FTIR (Fourier transform infrared) spectroscopy and XRD (X-ray diffraction). Batch experiments were performed …
Published in Journal of Materials & Metallurgical Engineering · Vol. 10, Issue 3, 2020 · pp. 1–7 Read article
-
Heavy Fermions to the Scheme from Semimetals
Abstract: This article is a study about heavy Fermions to scope strange and unknown features of scattering accounted to conduction electrons in the metal. Nucleons generated by heavy metal compounds are named heavy fermions. These generate from magnetic impurities that are present in the matter as unusual distribution in particulate forms. Parameter of quasi-crystal lattice instability of these compounds has significance in response to behave as non-Fermi liquids affected under magneto-transport. …
Published in Journal of Materials & Metallurgical Engineering · Vol. 11, Issue 2, 2021 · pp. 15–22 Read article
-
Design conceptualization and computational analysis of cryogenic engine nozzle -ABYOM
Abstract: The main purpose of this paper is to design a cryogenic engine nozzle with specified dimensions using CATIA V5 software and analyze the nozzle using ANSYS software. The realizable k-ε viscous model was used for calculation and the Hydrogen (H2) had retained as an ideal gas. The CFD simulations were done on the nozzle to find the pressure, density, velocity, and temperature. In the graph, there are 500 points streamlined …
Published in Journal of Materials & Metallurgical Engineering · Vol. 12, Issue 2, 2022 · pp. 14–23 Read article
-
Evaluating Novel Inhibitor Pigment Blends using Electrochemical Scanning Techniques (EIS, SVET and SKP)
Abstract: AbstractOne of the main applications coming to the fore for scanning vibrating electrode technique (SVET) and scanning Kelvin probe (SKP) systems is ability to look at inhibitor combinations, which could be used to replace chromates in coil-coated galvanized steels. The results are very promising using the SVET system and results with the SKP system also show results to be comparable with the SVET system. Electrochemical impedance spectroscopy (EIS) is also …
Published in Journal of Polymer & Composites · Vol. 1, Issue 1, 2013 · pp. 6–16 Read article
-
Passive Capillary Flow of Aqueous Working Liquids in the Straight PMMA Microchannels of Rectangular Cross- sections
Abstract: In this report, polymethylmethacrylate (PMMA) is used to fabricate the straight microchannels of uniform channel widths having rectangular cross-sections. Maskless lithography, hot embossing lithography and direct bonding are the chosen techniques to fabrication the straight PMMA microchannels. Aqueous ethanol and aqueous isopropyl alcohol (IPA) are the prepared aqueous working liquids to study the passive capillary flow characteristics. Total 8 individual straight PMMA microchannels are fabricated in this work. This work …
Published in Journal of Petroleum Engineering & Technology · Vol. 8, Issue 2, 2018 · pp. 5–8 Read article
-
A Critical Review of Hydraulic Fracture Propagation in Shale Gas Reservoirs
Abstract: The successful exploration and development of unconventional shale gas reservoirs was possible with advances in hydraulic fracturing and horizontal drilling. Hydraulic fracture treatments open these natural fractures and create a fracture network in gas shales. However, the fracture propagation is not fully understood as of now. A critical review of hydraulic fracture propagation in shale gas formations is presented in this paper. Effects of pertinent factors on hydraulic fracture propagation …
Published in Journal of Petroleum Engineering & Technology · Vol. 3, Issue 3, 2013 · pp. 1–17 Read article
-
Review on Chemical Separation of Crude Oil and Analysis of Its Components
Abstract: Crude oil is chemically composed of a complex mixture of hydrocarbons of different gaseous, liquid and solid states, the total of which may reach more than 17,000 organic compounds. At standard conditions of pressure and temperature the light hydrocarbons with carbon numbers 1 to 4 (methane, ethane, propane, butane) are present in gaseous form; Whereas pentane and the heavier hydrocarbons are found in liquid form, and in the heavy fractions …
Published in Journal of Petroleum Engineering & Technology · Vol. 11, Issue 2, 2021 · pp. 35–49 Read article
-
Evaluation of the Effects of Total Suspended Solid and Total Hardness in Crude Oil Contaminated Water Environment
Abstract: The actions and effects of a few selected physiochemical traits present in a contaminated water environment were examined in this study attempt using experimental methods and mathematical expressions. Throughout the course of 84 days at 14-day intervals, six control valves were established at equal intervals down the depth of the tanks to collect samples for study of physicochemical characteristics, total bacterial counts (TBC), and total petroleum hydrocarbon (TPH) content. The …
Published in Journal of Petroleum Engineering & Technology · Vol. 13, Issue 2, 2023 · pp. 35–46 Read article