Search
594 articles for “Stability studies”
-
Comprehensive Performance Assessment of Silane-Treated Bio-Extracted Husk Fiber Reinforced Composites for Sustainable Construction Applications
Abstract: This research project is an extensive experimental study on bio-extracted husk fiber polymer composites with a focus on silane surface treatment. Bio-extracted rice husk fibers underwent an alkali-enzymatic hybrid extraction process followed by a 3-aminopropyltriethoxysilane (APTES) treatment for improved interfacial adhesion and matrix compatibility. Resin composites with treated and untreated fibers were fabricated with a weight ratio of 10%, 20%, and 30% via hand lay-up methods. A battery of mechanical …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 229–241 Read article
-
Mechanical Properties, Viscoelastic and Water Absorption Properties of Biocarbon-Reinforced Composites
Abstract: Biocarbon-reinforced polymer composites have emerged as a sustainable alternative to conventional composites, combining environmental benefits with promising material properties. This study explores the effect of varying biocarbon content (0%, 10%, 20%, and 30% by weight) on the mechanical, viscoelastic, and water absorption properties of a polypropylene (PP) matrix. Tensile strength tests reveal that incorporating 10% biocarbon yields the highest strength at 35 MPa, attributed to enhanced interfacial bonding. However, at …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 145–157 Read article
-
Current Controlled Oscillator Using FinFET
Abstract: A current-controlled oscillator using 18 nm FinFET technology is proposed in this study which consists of a Current Controlled Differential Difference Current Conveyor (CCDDCC) block to control the current. FinFET technology has better scalability and lower leakage current compared to traditional CMOS, which allows it to surpass the obstacles faced by CMOS-based oscillators. The suggested oscillator is suitable for electronic applications such as Phase-Locked Loop (PLL) systems, radio frequency (RF) …
Published in Journal of Semiconductor Devices and Circuits · Vol. 12, Issue 3, 2025 · pp. 17–28 Read article
-
Enhance Thermal and Conductive Properties through Graph Neural Network-Based Machine Learning-Driven Advanced Polymer Material Design
Abstract: Advanced polymer materials are widely used in modern engineering and manufacturing because of their lightweight nature, flexibility, durability, and adaptability to different applications. However, designing polymer materials with enhanced thermal and electrical properties remains a challenging task. The performance of polymers is influenced by a complex combination of molecular structures, filler materials, processing parameters, and nanoscale interactions. Conventional optimization methods often require extensive experimental trials and computational resources, making it …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Development of Self-Healing Circuit Boards Using Shape Memory Polymer Composites
Abstract: This study investigates the influence of temperature, humidity, and nanofiller type on the electrical and structural performance of advanced polymer nanocomposites for self-healing circuit applications. Particular attention was given to conductivity retention and the morphological behavior of carbon nanotubes (CNTs), graphene, and silver nanoparticles (AgNPs). Results show that conductivity decreased under elevated thermal–humidity conditions, reflecting the role of environmental stress in material degradation. Among the tested systems, AgNP-based composites achieved …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 746–770 Read article
-
Facial Biometrics for Attendance System
Abstract: This paper discusses the necessity for effective student attendance management systems by proposing a smart attendance management system utilizing biometric technology. It is well recognised that manually recording attendance is time-consuming and error prone. In this study, we propose a Facial Biometrics attendance system that automates attendance process without requiring human intervention. The system consists of a camera placed in the classroom to take pictures of the pupils. Subsequently, the …
Published in International Journal of Electrical and Communication Engineering Technology · Vol. 2, Issue 1, 2024 · pp. 36–44 Read article
-
Fabrication, Mechanical Characterization and Biodegradation Analysis of Polylactic Acid Based Composite for Medical Sutures
Abstract: Wound closure is surgical aids relies heavily on sutures, which help maintain proper tissue alignment and supporting healing. The effectiveness depends on factor such as the type of wound, required mechanical strength, risk of infection and characteristics like absorbability and thickness of the martial. The efficacy of sutures is determined by their material properties and structural characteristic’s, which affect their mechanical properties. The primary objective of this study was to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Nutrient Sensing and Microbiota Crosstalk: Driving Determinants Shaping Metabolic Stability and Adaptive Physiology for Animal Health
Abstract: Nutrient sensing is a fundamental cellular process that enables animals to adapt to fluctuating dietary inputs while maintaining metabolic homeostasis and health. Recent advances reveal that the gut microbiota functions as an active metabolic partner, producing bioactive metabolites that directly influence host nutrient-sensing pathways and downstream cellular responses. This review synthesizes current knowledge on the integration of key signalling networks, including adenosine monophosphate activated protein kinase (AMPK), mechanistic target of …
Published in International Journal of Molecular Biotechnological Research · Vol. 4, Issue 2, 2026 Read article
-
Wettability and Physiothermal Analysis of Silver-Reinforced Eggshell-Derived Hydroxyapatite Based Biocomposite
Abstract: Hydroxyapatite (HAp), a biocompatible ceramic material, has garnered significant interest in medical applications due to its natural bone type replica. The current study investigates the physical, wettability, and thermal properties of a novel HAp derived from eggshell waste and reinforced with silver nanoparticles at 0.0, 0.1, 0.2 and 0.5 weight % concentration using chemical precipitation method and termed as HAP0.0Ag, HAP0.1Ag, HAP0.2Ag and HAP0.5Ag respectively. As observed, the Fourier transform …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 300–314 Read article
-
Nano Positioning for Large Scanning Range for XY Mechanism
Abstract: In this study, an XY flexure stage that provides a variety of motion options while reducing incorrect motions is designed and assessed. In the flexure design, the double parallelogram flexure modules are positioned methodically and symmetrically. The performance of the flexure stage is assessed using finite element analysis, and experimental testing is performed to validate the findings. The built-in prototype of the flexure stage has dimensions of 350 mm x …
Published in Journal of Microelectronics and Solid State Devices · Vol. 12, Issue 1, 2025 · pp. 30–35 Read article
-
Soil Around the Pier Below the Bed Level of River
Abstract: This study presents the evaluation of vertical and lateral loads acting on a bridge pier–pedestal system subjected to self-weight and vehicular loading. The pier, having a height of 25 m, length of 20 m, and thickness of 1 m, was found to carry a self-weight of 1200 t. When combined with a vehicular load of 2000 t, the total vertical load on the pier becomes 3200 t. Considering lateral force …
Published in Journal of Geotechnical Engineering · Vol. 13, Issue 1, 2026 · pp. 64–70 Read article
-
Comparative Cooling Analysis of EV Battery Packs using MATLAB Simscape
Abstract: Since electric vehicles (EVs) transition to high- voltage systems to enable quicker charging and enhanced delivery of power, the high heat emitted during rapid discharge is a significant challenge. This paper presents a direct comparative study of passive air cooling and active liquid cooling of a lithium-ion battery pack. Due to the high cost of constructing the physical prototypes, we created a computationally efficient and hierarchical virtual prototype in MATLAB …
Published in International Journal of Electrical and Communication Engineering Technology · Vol. 4, Issue 2, 2026 Read article
-
Enhancing Sustainability and Safety in India's Process Industry Through Targeted Innovations
Abstract: The process industry operates within a highly intricate and high-risk environment, necessitating well-structured strategies to safeguard workers, maintain safety standards, and preserve environmental integrity. This study explores the impact of diverse safety interventions designed to enhance health, safety, and environmental performance. It evaluates multiple approaches, including engineering solutions, procedural controls, protective gear, and behavioral adjustments, aimed at mitigating risks such as chemical spills, fires, explosions, equipment failures, and occupational health …
Published in Journal of Industrial Safety Engineering · Vol. 12, Issue 1, 2025 · pp. 22–36 Read article
-
Characterization of Mechanical and Viscoelastic Properties of Ceramic Nanoparticle-Reinforced Polymer Composites
Abstract: This study examines the mechanical and viscoelastic properties of polymer composites reinforced with ceramic nanoparticles, specifically focusing on enhancing the performance of the material through the incorporation of alumina nanoparticles. The composites were produced by embedding alumina nanoparticles into an epoxy matrix, and their properties were assessed using tensile, flexural, and dynamic mechanical analyses (DMA). The tensile tests showed a remarkable 40% increase in tensile strength and a 35% enhancement …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 71–82 Read article
-
Polymeric Hybrid Systems Engineered with Multiple-Stage Energy Absorption for Temperature Control
Abstract: Polymer–composite based phase change systems offer an effective strategy for adaptive thermal management; however, most existing systems exhibit single-stage latent heat transitions, limiting their applicability in environments with fluctuating thermal loads. In this study, a thermoplastic polyurethane (TPU) polymer matrix was reinforced with two microencapsulated paraffin-based phase change materials (PCM-A and PCM-B) to achieve multi-level latent heat storage behavior. The fabricated TPU/PCM-A10–B20 polymer–composite demonstrated two distinct endothermic transitions at approximately …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 146–155 Read article
-
Investigating the Dietary Flexibility and Feeding Behavior of Clarias anguillaris and Auchenoglanis biscutatus in a Tropical River Ecosystem
Abstract: Studies on food and feeding habits of fishes are required to guide the selection of fish species for culture. The current study determined the food and feeding habits of Clarias anguillaris and Auchenoglanis biscutatus in the Lower River Benue at Makurdi, Nigeria. Fish samples were collected biweekly from local fishermen at the Wadata landing site who fished with different gears like gillnets, cast nets, hook and line, traps and lift …
Published in International Journal of Marine Life · Vol. 2, Issue 1, 2025 · pp. 1–9 Read article
-
Next-Generation Lightweight Nanocomposite Structures for Electric Mobility
Abstract: The rapid expansion of the electric vehicle (EV) sector has intensified the demand for battery enclosures that are lightweight, mechanically strong, thermally stable, and environmentally sustainable. This research focuses on the design and sustainable fabrication of hybrid nanocomposites for advanced EV battery housings. The proposed material system integrates carbon fiber, glass fiber, and graphene nanoplatelets within a bio-based epoxy matrix, resulting in improved mechanical strength, enhanced thermal stability, and superior …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1147–1156 Read article
-
Performance and Emission Profiles Enhancement of CI Engine with Aluminium Oxide-Reinforced Polymeric Composite in Biodiesel Blends
Abstract: The integration of aluminium oxide (Al₂O₃) nanoparticles into B10 biodiesel blends offers a promising approach to improving engine performance and reducing harmful emissions. This study evaluates the effect of Al₂O₃ additives on Brake Thermal Efficiency (BTE), Brake Specific Fuel Consumption (BSFC), and exhaust emissions in a compression ignition engine. Experiments were conducted using calibrated instruments, and uncertainties were considered with a coverage factor of 1.66, yielding an overall error margin …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 775–788 Read article
-
Signal Drift Compensation in Polymer-Based Wearable Biosensors Using Data Processing Techniques
Abstract: Polymer-based wearable biosensors have emerged as promising platforms for continuous physiological monitoring due to their mechanical flexibility, low operating voltage, and compatibility with soft biological interfaces. However, their long-term deployment remains challenging because of signal drift caused by polymer ageing, hydration–dehydration cycles, ionic trapping, and environmental variations. These effects introduce baseline fluctuations and sensitivity degradation, which compromise the reliability and interpretability of physiological measurements. This study proposes a data-processing–driven framework …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 197–207 Read article
-
Marine Algal Fiber Reinforced Bio-Composites with Embedded Humidity Sensors for Coastal Smart Infrastructure
Abstract: The development of sustainable structural materials with integrated sensing capabilities has emerged as an effective strategy for improving the durability and resilience of coastal infrastructure exposed to aggressive marine environments. In this study, a multifunctional marine algal fiber reinforced bio-composite incorporating an embedded flexible humidity sensor was developed for real-time structural health monitoring applications. Marine macroalgae (Ulva lactuca) fibers were chemically functionalized using 3-aminopropyltriethoxysilane (APTES) to enhance fiber–matrix interfacial adhesion …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article