Search
1948 articles for “Particulate matter (PM2.5” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
Nothing matched all of your words, so these match any of them.
-
“Super-Go”: An Industrial IoT BOT
Abstract: AbstractIncreasing population results in the increase of the work payload on the humans, due to which errors happen. To avoid or reduce such incidents, introducing the concept of Super-Go in the industry can bring a revolutionary change in the upcoming future. This is mainly useful in retail markets where the probability of the customers looking for a product around the premises is not defined. Usually the problems faced in a …
Published in Journal of Instrumentation Technology & Innovations · Vol. 8, Issue 1, 2018 · pp. 21–26 Read article
-
Design and Implementation of Smart Market Infrastructure
Abstract: AbstractIn today’s world, we cannot get real time status of available shops in our nearby market or market at distance, which leads to waste of time, money and resources. Therefore, we have introduced a novel idea of smart market infrastructures with reference to local market scenario of Indian subcontinent. The idea is about using available technologies efficiently which will help us in solving real life problems which are very much …
Published in Journal of Microcontroller Engineering and Applications · Vol. 5, Issue 1, 2018 · pp. 11–18 Read article
-
Cylindrical Dielectric Resonator Antenna With Rectangular Patch
Abstract: DRAs are used for 5G communications of huge bandwidth from millimeter to Terahertz. high facts charge is performed through the channel ability i.e. C=Blog2(1+SNR) where C is the channel capacity and B is the bandwidth of the channel. The cylindrical resonator antenna operating in hybrid HEM11 mode. in this paper a cylindrical dielectric resonator antenna (CDRA) with frequency range (26GHz).The cylindrical dielectric resonator with radius r=1.45mm and height h=1.4mm. the …
Published in Journal of Microwave Engineering and Technologies · Vol. 9, Issue 1, 2022 · pp. 9–15 Read article
-
An Experimental Study on the Effect of Tensile Properties and Hardness of AA6082-T6 under the Heat Treatment Conditions
Abstract: AbstractIn the present study, the experiments were performed to investigate the effect of heat treatment parameters viz. soaking time and temperature on the tensile properties and hardness of Aluminium alloy (AA) 6082-T6 sheet. The sheet was heat treated and cut the standard tensile specimen ASTM E8M-04tofind out the tensile properties and hardness value at different temperature with respect to different soaking time. Air circulation oven type electric furnace was used …
Published in Journal of Materials & Metallurgical Engineering · Vol. 8, Issue 3, 2018 · pp. 36–41 Read article
-
Effect of Mixing Time on Mechanical Properties of Epoxy-Fly Ash Composite
Abstract: Particulate reinforced polymer composites have been designed to improve the (polymer) composite properties and with reduction of cost. In the present study, fly-ash is used as a filler material. Samples are made with different mixing times i.e. 5, 10, 15, 20, 25 and 30 min. Ultrasonic and magnetic mixing are the two ways to mix the particulate as fillers. The resulting mechanical properties such as flexural strength, tensile strength and …
Published in Journal of Materials & Metallurgical Engineering · Vol. 5, Issue 2, 2015 · pp. 11–17 Read article
-
Recovery of Iron Values from Iron Ore Slimes using Reagents
Abstract: Mining wastes include waste generated during the extraction, beneficiation or processing of minerals like iron ore fines, slimes and tailings. Approximately 10–20% of the raw material is discarded as slimes in to slime ponds/tailing dams. Recovery of iron values from slimes result in economic benefit by utilization of waste as a resource and minimizes the threat to the environment. The iron ore slime is generally considered as waste due to …
Published in Journal of Materials & Metallurgical Engineering · Vol. 6, Issue 3, 2016 · pp. 32–43 Read article
-
Analysis of Heavy Metal in Industrial Soil Through Atomic Absorption Spectroscopy and its Relationship with Some Soil Properties
Abstract: The disease of soil is a premise of peril to the strength of individuals at diverse stages as well as towns and urban areas. Overwhelming metals unconstrained as poisonous effluents from smelters are dumped into close by biological system and are connected with wellbeing danger. Modern industrialization is main root to release different overwhelming metals which spreads to the dirt as aero soils, particulate issue, residue, effluents and strong waste. …
Published in Journal of Materials & Metallurgical Engineering · Vol. 11, Issue 2, 2021 · pp. 29–37 Read article
-
Determination of Heavy Metals in Soil Samples in the Vicinity of Liquid Natural Gas Project, Shabwah Governorate, Yemen
Abstract: The present work aimed to determine the contaminants in soils resulting from or deposited due to emissions that come from natural gas in the area of Balhaf which is an LNG project in Republic of Yemen. Total of 8 surface soil samples were collected at depth of approximately (0–10 cm) from two sites which has different distances from the natural gas liquefaction project, took 4 samples from first site. The …
Published in Journal of Materials & Metallurgical Engineering · Vol. 12, Issue 1, 2022 · pp. 67–76 Read article
-
Performance Analysis of Complimentary Pass Transistor Logic Based Multiplexer Using Dual-gate FinFET Technology
Abstract: AbstractThis paper presents the design and analysis of double gate FinFET complimentary pass transistor logic (CPL) multiplexer. The circuit of multiplexer (MUX) using CPL is used for comparison of performance parameters like average power consumption, rise/fall time, delay, slew rate, PDP and EDP. Multiplexer is a digital circuit, it has inputs and select line; select lines are used for select input lines to transfer data to the output end. The …
Published in Journal of Microelectronics and Solid State Devices · Vol. 5, Issue 1, 2018 · pp. 41–48 Read article
-
Thermo-Mechanical Properties of Unsaturated Polyester Reinforced with Coconut and Snail Shells
Abstract: AbstractParticulate-filled polymer composites are becoming quite attractive because of their low cost and wide applications. In this study, the effects of coconut shell (CS) and snail shell (SS) volume fractions (5–50 vol. %) on the thermal and mechanical properties of unsaturated polyester resin (UPR) composite are investigated. The results show that tensile strength, elongation at break, flexural strength, and hardness of the composite increase as filler concentration increases. However, impact …
Published in Journal of Polymer & Composites · Vol. 2, Issue 2, 2023 · pp. 44–56 Read article
-
Parametric Study of Twin Screw Extrusion for Processing Epoxy/Carbon Black Nanocomposites Using Orthogonal Array Technique
Abstract: AbstractThis paper presents the experimental investigation of the influence of process parameters of twin screw extrusion on the dispersion and electrical, thermal and mechanical properties of epoxy/CB nanocomposites. Four factors, namely, loading level of carbon black (0, 2, 4, 6, 8 and 10 wt%) in epoxy, screw speed (75, 100 and 125 rpm), temperature (5 °, 15 ° and 30 °C) and number of passes (5, 10 and 15) were …
Published in Journal of Polymer & Composites · Vol. 1, Issue 2, 2013 · pp. 15–26 Read article
-
Studies in Effect of Alumina Nanoparticles on the Properties of Unplasticized Polyvinylchloride (PVC)
Abstract: AbstractUnplasticized polyvinylchloride (PVC)/nano-alumina composites were prepared using high- speed mixer, two-roll mills and compression molding. In the composite, the concentration of nano-alumina was varied from 0 to 7 phr (parts per hundred). The prepared composites were characterized for mechanical, thermal, electrical, crystallinity and morphological properties. Optimal improvement in properties was obtained at 5 phr concentration of nano-alumina in the PVC matrix. Tensile strength, tensile modulus, flexural strength, flexural modulus and …
Published in Journal of Polymer & Composites · Vol. 1, Issue 2, 2013 · pp. 27–34 Read article
-
Analysis of Oxidation Behavior on T-22 Boiler steel at 800°C
Abstract: The behavior of boiler steel T-22 in a rich air environment has been studied under the condition of isothermal at 800°C for 50 cycles in a cyclic manner. The kinetics of oxidation was established for boiler steel T-22under cyclic conditions for 50 cycles by weight change technique per unit area. Each cycle heating the sample at 1 hour followed by cooling 20 minutes at ambient temperature. Detonation gun spray techniques …
Published in Journal of Polymer & Composites · Vol. 8, Issue 1, 2020 · pp. 18–25 Read article
-
Studies on Mechanical, Optical, Barrier Properties and Characterization of LDPE-PLA Blend Films with Micro Clay
Abstract: Low density poly ethylene (LDPE) and Poly lactic acid (PLA) in the ratio of 70:30 wt% were blended along with ethylene glycidyl meth acrylate (EGMA) as compatibilizer (2.5%), benzophenone as photodegradable additive (1%) and microclay (1,3,5%) as filler. Blending took place in a twin-screw extruder and then the resulting blend was processed into a film using blown film extrusion. Mechanical, optical, barrier and degradative properties of film were tested as …
Published in Journal of Polymer & Composites · Vol. 9, Issue 3, 2021 · pp. 56–66 Read article
-
Role of GO and rGO on the Structural Properties of PA6/PMMA Blend Nanocomposites
Abstract: To understand and assess the role of Graphene Oxide (GO) and reduced graphene oxide (rGO) in the PA6/PMMA blend, nanocomposites, the PA6/PMMA (50:50 wt%) blend-based nanocomposites were prepare by loading different wt% of GO and rGO (1wt% and 3wt%), through twin screw melt extrusion followed by injection moulding technique. Different compositions of the nanocomposites were prepared using melt mixed method at 2300C by applying a rotational torque 50 N. All …
Published in Journal of Polymer & Composites · Vol. 10, Issue 1, 2022 · pp. 1–10 Read article
-
Mechanical Properties of Composites Made from Waste PET and Coconut Husk Fibres Using an Innovative Method
Abstract: The main purpose of this study was to develop a composite material based on two waste products, namely, polyethylene terephthalate (PET) bottles and coconut husk fibres using a simple innovative method to improve its mechanical properties. The fibres, after extraction, were treated with 5 wt% NaOH. They were then coated with a thin layer of polyester resin. The composite specimens were then manufactured in an industrial furnace. The shredded PET …
Published in Journal of Polymer & Composites · Vol. 11, Issue 3, 2023 · pp. 56–71 Read article
-
Investigation on Mechanical Properties of Bamboo-Plastic Composites by Alkali Treatment and Illustration via Scanning Electron Microscopy
Abstract: The morphological properties, tensile and flexural strength of composite materials made of bamboo fibres and plastic were investigated. Bamboo-plastic composites (BPCs) were made from bamboo fibres, plastic, and urea formaldehyde (UF) resin to evaluate the effects on mechanical properties. Two different types of plastics, namely polypropylene (PP) and low-density polyethylene (LDPE) were used to make the composite fabrication. The bamboo fibres were extracted after soaking them in a sodium hydroxide …
Published in Journal of Polymer & Composites · Vol. 11, Issue 3, 2023 · pp. 86–95 Read article
-
Theoretical Prediction of Maximum Number of Methane Molecule Accommodation in Unit Cages of S-I Clathrate Structure
Abstract: Density Functional Theory (DFT) based simulations have been performed to determine maximum possible number of methane molecule accommodation in unit cages of methane hydrate structure-I (S-I). Interaction energy, encapsulation energy and incremental encapsulation energy are calculated using B3LYP functional and 6-31+G(d) basis set. Nuclear magnetic resonance and Raman spectroscopy of one methane encapsulated are predicted at B3LYP/6-31G(d) level for 51262 hydrate cage. Maximum one methane molecule accommodation both in 512 …
Published in Journal of Petroleum Engineering & Technology · Vol. 2, Issue 1-3, 2012 · pp. 116–122 Read article
-
Optimization and Analysis of InGaAs Vertical Nanowire Transistor for Memory Array Applications
Abstract: In this paper, we present a cylindrical gate all around In 0.53 Ga 0.47 As Vertical Nanowire Transistor (VNWT) on silicon at ultra-shortchannel gate length 14nm by numerical simulation approach. The In 0.53 Ga 0.47 As VNWT device dimensions like diameter, source and drainextension length and channel doping are taken as critical process parameters and optimized for better performance. The proposed device isscalable up-to 10nm with a maximum On-current of …
Published in Journal of VLSI Design Tools and Technology · Vol. 13, Issue 2, 2023 · pp. 32–44 Read article
-
Experimental analysis of quaternary cement binder
Abstract: As concrete structure emitted large amount of carbon dioxide in the environment, to reduce these emition, need to minimize use of cement by using supplementary cementious material such as fly ash, silica fume, rice husk, ground granulated blast furnace slag etc. As quaternary blended cement concrete is prepared by replacing of cement with cementious material is good option for this. In this research quaternary blended cement concrete prepared by using …
Published in Recent Trends in Civil Engineering & Technology · Vol. 10, Issue 1, 2020 · pp. 12–17 Read article