Search
756 articles for “Matrix”
-
Structural Modification of Sugarcane Bagasse using Alkaline, Acid, and Bleaching Pretreatments for Enhanced Yield of Poly (1→4)-β-D-glucopyranose (Cellulose) and Hemicellulose for Utilization as Biocomposites
Abstract: Sugarcane bagasse, a lignocellulosic byproduct generated in substantial quantities by the sugar industry, represents a promising feedstock for the sustainable production of enzymes and bio-based chemicals. Its high (1→4)-β-D-glucopyranose (cellulose) content, abundant availability, and low cost make it an ideal candidate for bioconversion processes. However, the inherent recalcitrance of bagasse, primarily due to its lignin-rich matrix, necessitates effective pretreatment strategies to enhance enzymatic digestibility. This study presents a comparative investigation …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 983–992 Read article
-
Fracture Analysis of FRP Composites under Thermo-Mechanical Loads for Different Geometry Cutouts
Abstract: Fiber-reinforced composites (FRPs) are used extensively in structural and non-structural components of the aerospace and automotive industries. To utilize these materials for structural applications, it is necessary to understand the fracture behavior of the material. In the present investigation of carbon fiber laminates, studies were carried out to understand the fracture toughness characteristics of the carbon fiber laminates with mechanical, thermal, and thermo-mechanical loadings of modes I, II, and III. …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 3, Issue 2, 2025 · pp. 1–10 Read article
-
Enhancement of Mechanical Properties in Hemp Fiber-Reinforced Epoxy Composites Using Graphene Nanoplatelets
Abstract: This study investigates how incorporating graphene nanoplatelets (GNPs) influences the mechanical performance of hemp fiber–reinforced epoxy composites. Hemp fibers were chemically treated by alkali treatment to improve fiber–matrix adhesion owing to their high specific strength, stiffness, renewability, and environmental friendliness. Graphene nanoplatelets were dispersed in acetone by probe sonication and added to acetone epoxy matrix at a concentration of 0.5 wt% and 1.0 wt%, respectively. Composite laminates were prepared by …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 98–109 Read article
-
Mechanical Performance and Material Properties of Nsm CFRP Polymer System
Abstract: Near-surface mounting systems are an advanced embedded technique application of CFRP composites in which the efficiency of the structure is mostly dominated by polymer matrix properties and interface stress transfer mechanisms. This review presents a holistic materials-based perspective on the experiment, analytical, and numerical studies conducted on the NSM-CFRP composite system, specifically on the behavior of the epoxy adhesive, interfacial behavior of composite–substrate system, and related structure–property relationships. The literature …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 311–319 Read article
-
Fabrication and Analysis of PBAT/Cyperus Rotundus Micro Crystalline Cellulose Biofilms for Food Packaging Applications
Abstract: Global plastic waste crisis has gained an increasing attention and many efforts have been made recently to develop biodegradable polymers as food packaging alternatives. Solution casting is used for fabrication and characterization of reinforced polybutylene adipate-co-terephthalate (PBAT) biofilm with Cyperus rotundus microcrystalline cellulose (CRC). PBAT-CRC biofilms with different CRC loadings (1%, and 2%) had been prepared and their structural, mechanical, thermal and morphological properties of fabricated biofilms were analyzed to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 591–599 Read article
-
Nano-Silica Reinforced Crosslinked Biopolymer–PCM Composites for Improved Thermal Cycling Durability
Abstract: Crosslinked biopolymer–PCM composites reinforced with nano-silica were developed to enhance thermal cycling durability, leakage resistance, and structural stability for advanced thermal energy storage applications. A starch-based biopolymer was chemically crosslinked using citric acid to create a stable polymer network, while paraffin was employed as the phase-change medium and nano-silica (1–4 wt%) served as a multifunctional inorganic reinforcement. FTIR analysis confirmed successful esterification between citric acid and the polymer backbone, indicated …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1–10 Read article
-
ML-Enhanced Self-Healing Fiber-Reinforced Polymer Composites with Embedded IoT Sensors for Damage Prediction
Abstract: Fiber-reinforced polymer (FRP) composites are widely used in aerospace and structural systems; nevertheless, the potential for microcracking and fatigue-induced performance degradation remains an obstacle with respect to improved service life. Traditional self-healing methods, while performing well on a chemical level, often lack real-time diagnostic awareness and adaptive control. To circumvent this, we developed a machine-learning augmented self-healing FRP composite, in which a DCPD–Grubbs catalytic matrix was combined with IoT sensor …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 188–208 Read article
-
Greener 3D Printing: The Role of Artificial Intelligence in Sustainable Polymer and Composite Manufacturing
Abstract: The integration of sustainable materials with additive manufacturing (AM) technologies marks a significant step towards environmentally responsible production. Biodegradable polymers, recycled thermoplastics, and bio-based composites, when used in 3D printing, offer the potential to reduce the ecological footprint of manufacturing. However optimizing the interplay between material properties process parameters, and product performance remains a complex challenge. This review examines how artificial intelligence (AI) is being applied to address these challenges …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 288–300 Read article
-
Using MCDM Methods in automotive industry- A Review
Abstract: In the automobile sector, choosing the best car necessitates weighing a number of factors, including cost, fuel economy, performance, safety, and environmental impact. In order to solve complicated situations that need the simultaneous evaluation of multiple conflicting aspects, Multi-Criteria Decision Making (MCDM) procedures are essential. Among the various MCDM approaches, the Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) and MOORA are widely recognized for their straightforward structure …
Published in Journal of Automobile Engineering and Applications · Vol. 13, Issue 1, 2026 · pp. 22–28 Read article
-
Elucidation of Physical Structural Stability of Nickel Nanoparticles Additive-Based Magnetorheological Grease
Abstract: This study investigates the influence of nickel nanoparticles on the physical properties and structural stability of magnetorheological grease (NMRG) as a smart composite. The incorporation of nickel nanoparticles aims to mitigate issues commonly observed in conventional magnetorheological grease (MRG), including particle aggregation within the fibrous matrix, limited material performance, and deformation instability. NMRG samples containing 1–5 wt% nickel nanoparticles were prepared using a mechanical stirring method. The tests focused on …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 191–215 Read article
-
Polymeric Hybrid Systems Engineered with Multiple-Stage Energy Absorption for Temperature Control
Abstract: Polymer–composite based phase change systems offer an effective strategy for adaptive thermal management; however, most existing systems exhibit single-stage latent heat transitions, limiting their applicability in environments with fluctuating thermal loads. In this study, a thermoplastic polyurethane (TPU) polymer matrix was reinforced with two microencapsulated paraffin-based phase change materials (PCM-A and PCM-B) to achieve multi-level latent heat storage behavior. The fabricated TPU/PCM-A10–B20 polymer–composite demonstrated two distinct endothermic transitions at approximately …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 146–155 Read article
-
Development of a Durable Superhydrophobic EP/PDMS Coating Reinforced with Micro-CaCO₃ and Nano-ZnO for Enhanced Corrosion Protection and Multifunctional Performance on Carbon Steel
Abstract: Balancing exceptional multifunctional performance with mechanical robustness in micro-nano composite films remains a significant challenge for practical applications. In this work, a superhydrophobic coating reinforced with micro-CaCO₃ and nano-ZnO particles was fabricated through a versatile single-step brushing method. The optimized EP/PDMS@micro-CaCO₃/nano-ZnO coating achieved a water contact angle (WCA) of 173.54° ± 2.53° and a sliding angle (SA) of 1.50° ± 1.12°. Owing to its carefully engineered micro-nano hierarchical structure, the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 216–238 Read article
-
Comprehensive Review of Composite Materials: Classification, Manufacturing Methods, Mechanical Behavior, Failure Modes, and Emerging Applications
Abstract: Composite materials have emerged as one of the most significant classes of engineered materials due to their ability to deliver high strength to weight ratios, enhanced durability, and tailored multifunctionality. Over the past two decades, rapid progress in polymer chemistry, advanced reinforcement architectures, additive manufacturing, and automated fabrication has expanded the applicability of composites across aerospace, automotive, biomedical, civil, and renewable energy sectors. This paper provides a comprehensive review of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 923–939 Read article
-
Interfacial and Tribo-Mechanical Performance of a TiO₂–Castor Oil Polymeric Nanofluid During Sustainable Machining of AISI 316L Stainless Steel Under MQL Conditions
Abstract: This research examines the tribo-mechanical performance and interfacial film characteristics of a TiO₂-reinforced castor-oil polymeric nanofluid during the turning of AISI 316L stainless steel under minimum-quantity lubrication (MQL). A Taguchi L9 orthogonal array was utilized to assess the synergistic effects of cutting speed, depth of cut, and coolant composition on surface integrity, while machining experiments were performed under dry, conventional, and TiO₂-nanofluid lubrication techniques. ANOVA and multiple-regression modeling were used …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 901–914 Read article
-
In Vivo Biocompatibility and Interfacial Stability of Thermoplastic Polyurethanes and Nanofilled Resin Composites: A Bioanalytical Study of Polymer-Host Interactions Under Dynamic Loading
Abstract: The widespread application of thermoplastic polyurethanes (TPU) and nanofilled resin composites in biomedical devices requires rigorous assessment of their biocompatibility under mechanical stress. While nanofilled composites utilize filler particles (<100 nm) to enhance surface properties and wear resistance, the biological response to these materials in a hydrolytic, enzymatic environment remains a critical area of investigation. Objective: To analyze the in vivo bio-molecular response at the interface of TPU aligners and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1112–1119 Read article
-
Next-Generation Lightweight Nanocomposite Structures for Electric Mobility
Abstract: The rapid expansion of the electric vehicle (EV) sector has intensified the demand for battery enclosures that are lightweight, mechanically strong, thermally stable, and environmentally sustainable. This research focuses on the design and sustainable fabrication of hybrid nanocomposites for advanced EV battery housings. The proposed material system integrates carbon fiber, glass fiber, and graphene nanoplatelets within a bio-based epoxy matrix, resulting in improved mechanical strength, enhanced thermal stability, and superior …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1147–1156 Read article
-
Tailoring Toughness of Pineapple Leaf Fiber-Reinforced Epoxy Composites Using Halloysite Nanotubes
Abstract: This comprehensive study investigates the effects of halloysite nanotubes (HNTs) on the impact strength and fracture toughness of pineapple leaf fabric-reinforced epoxy (PALF/Ep) composites with an emphasis on sustainable material development. ASTM D256 and ASTM D5045 standards were followed in the fabrication of the composites. HNT weight percentages were systematically changed from 0 to 3wt% through using solution mixing and manual lay-up techniques, and vacuum bagging was used to obtain …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 261–272 Read article
-
Experimental Evaluation of Carbon Fiber Reinforced Epoxy Composites for Structural Applications
Abstract: Composites made of carbon fibre reinforced polymer (CFRP) are currently one of the most widely used material classes in advanced engineering applications because of their remarkable environmental resistance, dimensional stability, and strength-to-weight ratio. The vacuum bag moulding method was used in this study to create CFRP laminates with different fiber-to-resin weight ratios: 50:50, 55:45, 60:40, 65:35, and 70:30. The reinforcement phase was made of unidirectional carbon fibre fabric and the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 401–415 Read article
-
Lightweight Composite Materials for Electric Vehicles (EVs) and Public and Private Transport
Abstract: The rapid expansion of the electric vehicle (EV) industry has intensified the demand for battery enclosures that are lightweight, durable, thermally stable, and environmentally sustainable. This study investigates the design and sustainable fabrication of hybrid nanocomposites for advanced EV battery housings. The proposed composite system combines carbon fiber, glass fiber, and graphene nanoplatelets within a bio-based epoxy matrix, resulting in superior mechanical strength, enhanced thermal stability, and excellent flame retardancy.A …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 470–481 Read article
-
Grey Relational Analysis of Cuttlefish Bone Particles–Glass Fiber Reinforced Epoxy Composites
Abstract: This research examines the mechanical characteristics, water absorption performance, and thermal stability of epoxy composites reinforced with Cuttlefish Bone Particles (CFBP) and glass fibers. Composites were fabricated with varying CFBP contents (0%, 3%, 6%, 9%, and 12%) using an epoxy resin as the matrix material and glass fiber as the primary reinforcement. The experimental results revealed that the CFBP-0 composite (neat epoxy with glass fiber) exhibited the highest tensile strength, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 239–246 Read article