Search
511 articles for “polymer properties”
-
Mechanical Performance Assessment of Hybrid FRP Laminates with Carbon Fiber Core Using Experimental and Numerical Approaches
Abstract: The high strength-to-weight ratio, corrosion resistance and design flexibility of Fiber-reinforced polymer (FRP) composites have attracted considerable attention in aerospace, automotive and structural applications. This work presents an experimental and finite element study on the tensile and flexural behavior of epoxy-based hybrid FRP laminates. Five laminate configurations were manufactured, including a unidirectional carbon fiber laminate and four hybrid laminates, Kevlar–Carbon–Kevlar (K/C/K), Glass–Carbon–Glass (G/C/G), Kevlar–Carbon–Glass (K/C/G), and Glass–Carbon–Kevlar (G/C/K). For all …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Aluminum based types of hydrophobic coatings for Engineering Materials: A Review
Abstract: Today's coating applications allow for the employment of a wide range of techniques and substances to safeguard products and structures from chemical and chemical harm. Coatings are now widely utilized in manufacturing across the globe to boost productivity and cut costs, both of which are crucial for maintaining the industry's profitability. Materials with coatings are stronger than those without coatings. Strong and hard metals, ceramics, bioglass, polymers, and plastic materials …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 113–133 Read article
-
Thermal and Electrical Performance of Aluminum-Reinforced GFRP Composites
Abstract: This work examines an economical approach to improve the thermal load protection of Glass Fiber Reinforced Polymer (GFRP) composites, commonly utilized in aircraft constructions, pressure containers, and electrical insulators. Notwithstanding their superior mechanical capabilities, GFRP composites are susceptible to elevated temperatures and electrical currents, frequently resulting in considerable structural deterioration. The study introduces an innovative method employing aluminum reinforcement to enhance the thermal conductivity and protection of GFRP composite laminates. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1062–1075 Read article
-
Performance and Robustness of Wind Turbine Blades Composed of Recovered Waste Carpet Fiber Polymer Composites
Abstract: Carpets stay in good condition for ten to fifteen years, after which they wear out and are discarded. The large amount of used carpet waste is often dumped in landfills, causing health risks, air pollution, and other environmental problems. To reduce the growth of landfill sites, it is essential to implement recycling measures for carpet waste, protecting the environment by reusing these materials in new products. Carpet are made from …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 53–66 Read article
-
Bioinspired Nanocomposite Bone Pins: Fabrication, Evaluation, and Suitability for Orthopedic Implant Applications
Abstract: Bone tissue engineering (BTE) requires scaffolds that mimic bone’s mineral–organic composition, offering mechanical strength, bioactivity, and degradation rates compatible with regeneration. Conventional metallic implants face corrosion and toxic ion release risks, while ceramics like hydroxyapatite (HAp) are bioactive but brittle. This study reports a multifunctional hybrid scaffold combining HAp for osteoconductivity; polycaprolactone (PCL) and collagen for flexibility and biocompatibility with sodium citrate for nanoparticle dispersion, ferrocene (Fc) for catalytic bioactivity; …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 526–540 Read article
-
Gelatin-EiO2 (Ei = Si/Ti/Zr) Based Mesoporous Nano-hybrids: Synthesis and Characterization
Abstract: The hybrid materials are mostly prepared by combining the organic or bio-organic part to the inorganic building blocks and are used in many applications. Gelatin as one of the main component of hybrid materials is an attractive option. It is biodegradable; biocompatible; non-toxic; bio-adhesive and contains many active groups such as –NH2, –COOH, in the biopolymer backbone makes these hybrid materials important in various technological applications. The synthesis of a …
Published in Journal of Materials & Metallurgical Engineering · Vol. 14, Issue 3, 2024 · pp. 30–58 Read article
-
Sustainable Green Solvents: Ionic Liquid-Based Hydrogels
Abstract: Green solvents have been widely used in a wide range of applications, such as catalysis, separation sciences, energy storage and pharmaceutical applications. The main ingredient in the collection of the environmentally benign reagents is ionic liquids (ILs). Ionic liquid-based hydrogels are being used in the biological sciences and medicinal chemistry fields because of their excellent biocompatibility and biosafety features. The versatility of ionic liquids is great, as they can be …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1263–1274 Read article
-
Stabilization of Reinforced Earth Wall Backfill Using Steel Slag and Recycled PET Fiber: A Composite Material Approach
Abstract: Reinforced Earth (RE) walls are widely used in infrastructure due to their structural efficiency and ease of construction. However, they typically require high-quality granular backfill, which may not be readily available or cost-effective in many regions. This study investigates the potential of utilizing locally available sandy clay soil stabilized with industrial and plastic waste materials specifically 20% steel slag and 0.75% shredded polyethylene terephthalate (PET) fibers, as an alternative backfill …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 110–127 Read article
-
An Overview of Surface Coating Methodologies and Their Use in Technical Materials
Abstract: To safeguard the product or structure against chemical harm, a variety of procedures and materials can be applied in coating applications today. Nowadays, coatings are used extensively in manufacturing all over the world to increase efficiency and reduce expenses two factors that are essential to preserving the sector's profitability. Coated materials have greater strength compared to uncoated materials. A variety of materials, including bio glass, polymers, ceramics, strong and hard …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 19–35 Read article
-
Computational Analysis of Leaf Spring System with Functionally Graded Materials Using ANSYS
Abstract: Leaf springs are important parts of a vehicle’s suspension system, and their main function is to absorb shocks, improve stability, and make the ride more comfortable. Traditionally, ASTM A36 steel is used because it is strong, long-lasting, affordable, and easy to get. However, this type of steel is very dense, which makes vehicles heavier. This extra weight makes the vehicle less efficient and increases emissions. Because of these issues, there …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 380–397 Read article
-
Comprehensive Performance Assessment of Silane-Treated Bio-Extracted Husk Fiber Reinforced Composites for Sustainable Construction Applications
Abstract: This research project is an extensive experimental study on bio-extracted husk fiber polymer composites with a focus on silane surface treatment. Bio-extracted rice husk fibers underwent an alkali-enzymatic hybrid extraction process followed by a 3-aminopropyltriethoxysilane (APTES) treatment for improved interfacial adhesion and matrix compatibility. Resin composites with treated and untreated fibers were fabricated with a weight ratio of 10%, 20%, and 30% via hand lay-up methods. A battery of mechanical …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 229–241 Read article
-
Development And Examination of a Composite Material Reinforced with Natural Bamboo Fiber
Abstract: This work provides a novel replacement for fiber-reinforced polymers (FRP) by integrating bamboo fibers into an epoxy matrix. Numerous studies are being conducted in this area to reach the intended standard. This composite exhibits a strong resemblance to synthetic fiber-based composites. This is mainly because to the benefits, which include low cost, biodegradable qualities, easy availability, non-toxicity, non-abrasiveness, and light weight. The representation used for the BFRP was a single …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 417–425 Read article
-
Influence of Crystallization Time by Hydrothermal Synthesis of Ag NPs-Zeolite Composite
Abstract: Inorganic molecules undergo a chemical reaction that results in the production of a brand-new building material known as geopolymer concrete. Otherwise known as an inorganic aluminohydroxide polymer, geopolymer is made mostly from by-products like fly ash and geologically derived silicon (Si) and aluminium (Al). It is a superior building material for the future because of its great mechanical qualities, significant chemical resistance (attack by magnesium or sulphate), low shrinkage and …
Published in Journal of Polymer & Composites · Vol. 11, Issue 1, 2023 · pp. 46–51 Read article
-
Targeting Papain-Like Protease of Re-Emerging Coronaviruses
Abstract: Re-emerging Corona viruses (CoVs), including SARS-CoV (S-CoVs), and SARS-CoV-2 (S-CoV-2), continue to pose a global health threat due to their high mutation rates, zoonotic spillover potential, and capacity for immune evasion. The global pandemic of year 2019, caused by S-CoV-2, has highlighted the importance for robust antiviral strategies beyond vaccines and RNA polymerase or main protease inhibitors, which are susceptible to resistance. One promising therapeutic target is the S-CoV-2 papain-like …
Published in Research and Reviews : A Journal of Life Sciences · Vol. 15, Issue 3, 2025 · pp. 46–62 Read article
-
Structure–Property–Performance Characteristics of Chlorella Vulgaris Lipid-Based Bio-Composites Modified with n-Pentanol
Abstract: The depletion of fossil fuel resources and increasingly stringent emission regulations have intensified the need for sustainable alternatives for compression ignition (CI) engines. Biodiesel derived from Chlorella vulgaris microalgae is a renewable, non-edible fuel; however, its higher viscosity and lower volatility can adversely affect engine performance. To address these limitations, higher alcohols such as n-pentanol can be employed as effective modifiers to improve fuel physicochemical properties while maintaining compatibility with …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1636–1648 Read article
-
Study on Thermal and Electrical Performance of Pani Doped Graphene Composites under Solar Light Irradiation
Abstract: Here in the research work focusses on the study of thermal and electrical performance of PANI doped graphene composites fabricated by chemical way. A sequence of conducting polymer oxidative method done using the polymerization of aniline in the presence of graphene was deliberate under solar light irradiation. The composites were inspected and characterized using spectroscopy and microscopy studies. The thermal/ electrical performance of PANI and PANI doped graphene were evaluated …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1134–1146 Read article
-
An Experimental Investigation on the Determination of Critical Micelle Concentration (CMC) Of Various Surfactants Using the Surface Tension Method
Abstract: This study primarily focuses on the experimental investigation for determining the critical micelle concentration (CMC) of various surfactants that are commonly employed to enhance the stability of nanoparticles in base fluids. In this context, three surfactants belonging to the anionic category—Sodium Dodecyl Sulfate (SDS), Sodium Lauryl Sulfate (SLS), and the bio-surfactant Rhamnolipid—were selected, along with one non-ionic polymer, Polyvinylpyrrolidone (PVP), which is used as a surfactant. The CMC of each …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 145–153 Read article
-
Crystalline and Polymeric Interactions in Multi- layered Bulletproof Glass: A Study of Ballistic Resistance and Structural Integrity
Abstract: Bulletproof glass is engineered to withstand high-impact projectiles, offering a critical line of defense in various industries such as banking, military, and armored vehicles. This study explores the structural composition, energy absorption mechanisms, and performance characteristics of bulletproof glass when exposed to ballistic threats. The glass consists of layered constructions, often involving polycarbonate and adhesive interfaces such as polyvinyl butyral, which enhance its energy absorption and resistance to projectiles. The …
Published in International Journal of Crystalline Materials · Vol. 1, Issue 2, 2024 · pp. 10–17 Read article
-
Enhancing Mechanical Performance in Reinforced Hybrid Composites using Silicon Carbide and Aluminium Oxide Fillers
Abstract: Hybrid composites are becoming useful because they have better qualities than regular composites. This study examines the conventional properties of composites that utilise SiC and Al2O3 as filler components. Kevlar, S-glass, and sisal fibers at 90° and 0°, followed by additional layers of S-glass and Kevlar. To make sure that the material qualities were the same throughout, the resin and fibre layers were arranged in an alternating pattern. Mechanical testing …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 934–945 Read article
-
A Sol-Gel Approach for the Fabrication of Zinc Oxide Nanoparticles and Their Nanocomposite with Urea Formaldehyde (UF)
Abstract: In the performed work, zinc oxide nanoparticles were synthesized via the sol-gel method using zinc sulphate as the precursor material. Urea-formaldehyde (UF) resin was employed as a polymer matrix to encapsulate the produced ZnO through an acid-catalyzed polymerization process. This encapsulation aimed to improve the dispersion stability and surface reactivity of ZnO within the polymeric medium. The synthesized materials were subjected to comprehensive characterization using Fourier Transform Infrared Spectroscopy (FT-IR), …
Published in International Journal of Crystalline Materials · Vol. 2, Issue 2, 2025 · pp. 21–27 Read article