Search
1977 articles for “measure” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
-
Effect of Sol-Gel Coating on Fire Performance and Optical Properties of Wood Panels
Abstract: Investigates the impact of sol-gel coating on the fire performance and optical properties of wood panels.SEM, EDX, and infrared spectroscopy with the Fourier transform were used to characterize the sol-gel coating, which was put on to the wood panels using a dip-coating technique. The fire performance of the coated and uncoated wood panels was evaluated by measuring the ignition time, flame spread rate, and total heat release rate. The optical …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 10, Issue 1, 2023 · pp. 20–24 Read article
-
A Slotted Fabric Antenna for Broad Band Application
Abstract: This article is presented a compact slotted textile patch antenna for broadband applications. The presented antenna is designed on textile substrate with dielectric constant of 1.7 and the anticipated antenna is compact size. It has been simulated using CST too and measurement is done with network analyzer. It covers a bandwidth of 6.45 GHz extending from 2.85 GHz to 9.30 GHz. It has maximum directivity of 2.932 dBi. The measured …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 4, Issue 2, 2017 · pp. 10–14 Read article
-
Analysis of Cooperative Communication Techniques
Abstract: The scope of this study is to analyze cooperative communication techniques by measuring the symbol error rate vs. signal to noise ratio and analyzing the merits and demerits of those techniques. Unless stated otherwise, the channel is modelled as Rayleigh fading and noise is modeled as white Gaussian. The results of this study can be used to understand the benefits of cooperative protocols and their necessity in future communication systems. …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 7, Issue 3, 2020 · pp. 1–9 Read article
-
The Design and Analysis of a High Bandwidth Patch Antenna Loaded with Double-L shaped Parasitic and Super-Strate Components
Abstract: A patch antenna having parasitic components in the shape of a double-L. It is shown how to make a directional slot antenna using a parasitic patch and a windowed superstrate. The recommended antenna may readily obtain high-gain properties due to its composition. The suggested antenna's impedance bandwidth has been measured. Internet of Things (IoT) apps to make their data more accessible, wireless communication technology integration is required. This work proposes …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 10, Issue 2, 2023 · pp. 1–13 Read article
-
Tuning Range, Phase Noise and Jitter Analysis of Current Starved Voltage Controlled Oscillator (VCO) for Digital PLL in 45 nm CMOS Technology
Abstract: A wide tuning range, low phase noise and low jitter 100 MHz Voltage-Controlled Oscillator (VCO) for DPLL was designed and implemented by 45 nm CMOS process technology using LT spice. There was a relation between the frequency tuning range, phase noise, and jitter at output of the VCO after linearizing the gain. Simulations using PTM 45 nm CMOS process technology shows, that a wide operation frequency range (tuning range) from …
Published in Journal of VLSI Design Tools and Technology · Vol. 5, Issue 2, 2015 · pp. 81–89 Read article
-
Switching Loss Calculation of Power MOSFET using the Estimation Technique
Abstract: An accurate analytical model is very important to measure the switching losses of PowerMOSFET. The perfect estimation of Power MOSFET switching loss is very difficult to predictthe efficiency of the power electronics circuit. This paper investigates the basic internalphysics of the Power MOSFET device and proposed the best possible analytical model tocalculate the power loss. The pre-existing widely accepted power loss calculation method isfound to be useless and inaccurate. In …
Published in Journal of VLSI Design Tools and Technology · Vol. 10, Issue 1, 2020 · pp. 37–44 Read article
-
Forest Fire Detection System
Abstract: The IOT industry is rapidly growing in the current scenario. Each one of us now understands the significance of Internet of Things. At present, it is being used in almost all industries making our lives a bit easier. Forest fires have become a massive threat across the globe, causing numerous negative impacts on human habitats and forest ecosystems. Climatic changes and the greenhouse effect are among the consequences of such …
Published in Journal of VLSI Design Tools and Technology · Vol. 13, Issue 1, 2023 · pp. 1–5 Read article
-
Soil Erosion Estimation modelling by Revised Universal Soil Loss Equation and SWAT on GIS platform
Abstract: Soil erosion is a threat to the economy of countries whose economy is dependent on Agriculture. It is very difficult to stop the soil erosion however if the causes of soil erosion and the quantum of it are calculated then with few appropriate soil conservation measures it can be reduced. This study is an attempt to estimate soil erosion by RUSLE & SWAT, in which urgent need of conservation measures …
Published in Journal of Water Resource Engineering and Management · Vol. 5, Issue 2, 2018 · pp. 56–69 Read article
-
Investigation of Miniature Venturi Flume
Abstract: A venturi flume is a device used to measure discharge in open channel. It consists of a convergent section followed by throat and a diverging section. The venturi flume normally occupies full width of channel on actual field. The present study proposes a new design of miniature venturi flume with reduction in width. The width reduction ratios of miniature flume to channel width (b/B) considered in the project are 0.33, …
Published in Journal of Water Resource Engineering and Management · Vol. 3, Issue 2, 2016 · pp. 26–31 Read article
-
Potable Water Quality Analysis of Akbarpura, KPK, Pakistan
Abstract: In Pakistan, supply of safe drinking water of international standard is very limited. Only around 30% population has access to piped drinking water, which has rarely been completely tested for health safety. About 70% population is drinking water of unknown quality. The only testing comes through human consumption and getting sick. This study is designed to investigate the water quality problems of Akbarpura, Khyber Pukhtunkhwa. Samples were collected from the …
Published in Recent Trends in Civil Engineering & Technology · Vol. 5, Issue 1, 2015 · pp. 19–27 Read article
-
Comparative Study of various Commercially Available Programs in Slope Stability and Simulation of Dynamic Loading
Abstract: Analysis of slope stability is carried out to identify the most critical failure plane so as to minimize the occurrence of slope failures and landslides. It is always needed to give serious consideration before any construction or development is executed to ensure that the designed slopes remain stable. Slope failure can be determined through appropriate measurement of slope stability. In this study C-programming and GEO4 and Plaxis 2D software have …
Published in Recent Trends in Civil Engineering & Technology · Vol. 3, Issue 2, 2013 · pp. 16–30 Read article
-
Turbulence Characteristics of Flow over Smooth and Rough Beds
Abstract: Experimental study on turbulence measurements in an open channel with smooth and rough beds using acoustic doppler velocimeter (ADV) has been carried out in the present study. Measured velocity distribution along the depth on smooth and rough beds for different discharges and bed slopes is in good agreement with logarithmic law. The turbulence intensities were more near the bed and less near the water surface. Existing equations for turbulence intensities …
Published in Recent Trends in Civil Engineering & Technology · Vol. 2, Issue 1-3, 2012 · pp. 160–166 Read article
-
Sustainability in Civil Engineering Infrastructure Development
Abstract: The civil engineering infrastructure is growing at a rapid speed in developing country like India. This development is a must for overall growth as a nation. The paper brings out how this development can be made sustainable. The paper deliberated how we can take advantages mainly of green materials and green building practices and measures for saving energy by using green materials for construction to reduce overall impact of the …
Published in Recent Trends in Civil Engineering & Technology · Vol. 7, Issue 1, 2017 · pp. 36–42 Read article
-
Optimization of Cement Replacement by Fly Ash in Compressive Strength of Portland Cement Concrete
Abstract: The production of cement has been known for its additive role in environmental pollution. As a measure of abatement of pollution effort, scientist have evoked the concept of diluting cement with various pozzolanic additive like fly ash, blast furnace slag etc. Many of these additives were found to be acceptable for cement replacement, but their exact role and efficacy remains elusive. In the present study, fly ash was added as …
Published in Recent Trends in Civil Engineering & Technology · Vol. 7, Issue 1, 2017 · pp. 24–35 Read article
-
Optimize the Efficiency of the Kaplan Turbine by Design and CFD Analysis of Runner Wheel Blades
Abstract: Abstract: Due to recent crises of electricity in the country, it is utmost need for the utilization of renewable energy resources abundantly available like hydropower. To overcome this problem of electricity shortage, hydro-power turbines can be used. Since every hydro site have different site conditions, so design and selection of the proper turbine type and size becomes more important. In this case, it is vital to adopt indigenous design and …
Published in Recent Trends in Fluid Mechanics · Vol. 6, Issue 1, 2019 · pp. 1–19 Read article
-
Analytical Analysis for Porous Silicon to Compute Porosity Using Optical Sensing Device
Abstract: This paper investigates the percentage of porosity in silicon using optical device. During the measurement of porosity, reflections as well as absorption losses are included to find out the transmitted intensity. Analytical results for the same reveals that reflectance, absorbance as well as transmittance vary linearly with respect to different percentage of porosity in the silicon. It is also seen that transmitted intensity through silicon varies linearly with respect to …
Published in Recent Trends in Sensor Research & Technology · Vol. 4, Issue 2, 2017 · pp. 1–5 Read article
-
Analysis of Water Content in Fire Resistant Hydraulic Fluids used in Coke Furnace Door Opening through Optical Waveguide
Abstract: AbstractThis paper attempts to measure the concentration of water in fire resistant hydraulic fluids used for opening of door in coke furnace through optical waveguide. The proposed model is a two dimensional photonic crystal structure with glass substrate consisting of air holes. Measurement principle is concentrated on linear variation of photonic band gap (PBG) along with concentration of fire resistant fluids infiltrated in air holes of photonic crystal structure. The …
Published in Recent Trends in Sensor Research & Technology · Vol. 5, Issue 1, 2018 · pp. 14–18 Read article
-
Scope of ITS in Exaggerating Existing Traffic Systems in India
Abstract: AbstractIndia is the largest democracy of world. Its current population is 1.3 billion and the land area of 3.1 million square km. Increasing population and urbanization in India increases the demand of vehicles, which leads to a critical burden on our existing traffic management system. One of the key issues for smart cities is to apply more sustainable and eco-friendly solutions to overcome the existing traffic congestion and environmental pollution …
Published in Recent Trends in Sensor Research & Technology · Vol. 4, Issue 2, 2017 · pp. 14–18 Read article
-
Multipoint Deflection Analysis using Non-Contact Image-Based System
Abstract: Abstract: In this paper, the experimental study proposes a non‐contact image‐based system for multipoint deflection measurement through image processing based on a low‐cost consumer‐grade camera. Deflection monitoring is one alternative method that can become the indicators of bridge feasibility since this method is easy, effective, and can be used for multi-temporal application. The objective of this study is to determine the deflection of simply supported beam of span 1.2 m …
Published in Recent Trends in Sensor Research & Technology · Vol. 6, Issue 1, 2019 · pp. 13–17 Read article
-
Smart Precision Agriculture using Wireless Sensor Network and IoT
Abstract: This study presents wireless irrigation and plant disease detection system. This system aims toreduce the manual work for the farmer by incorporating wireless technology to ensure theefficiency. The entire system consists of Wireless Sensor Node Units and a WirelessInformation Unit. Each sensor node is equipped with a temperature and humidity sensor, asoil moisture sensor and a microcontroller to measure the sensor data values. In addition tothese sensors, we have used …
Published in Recent Trends in Sensor Research & Technology · Vol. 7, Issue 3, 2020 · pp. 8–13 Read article