Search
768 articles for “properties and performance”
-
Organic Solar Cell: It’s future prospect
Abstract: Organic solar cells (OSCs) are emerging as a promising frontier in renewable energy technology, distinguished by their lightweight, flexible composition, cost-effective manufacturing processes, and potential for large-scale deployment. Unlike their silicon-based counterparts, which rely on inorganic materials, OSCs harness organic molecules or polymers to convert sunlight into electricity. Their adaptability in design and production is a key strength, facilitated by the ease with which organic materials can be synthesized and …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 11, Issue 1, 2024 Read article
-
Innovative Polymer Membranes for Enhanced Gas Separation: Applications in Energy and Environmental Technologies
Abstract: Energy and environmental technology could benefit greatly from novel gas-separation membranes, especially those based on new polymers. This includes the design and characterization of new polymer membranes with enhanced selectivity and permeability for critical industrial gas separations like CO₂/CH₄ as well as CO₂/H₂. Using molecular design strategies, the membranes are addressed toward properties relevant for gas transport, which are important for applications that include carbon capture, natural gas purification, and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 Read article
-
Low-Grade Heat Recovery: Emerging Materials and Systems for Efficient Utilization
Abstract: Low-grade heat (LGH), generally characterized by temperatures below 200°C, constitutes a significant portion of wasted thermal energy in industrial, commercial, and even residential processes. Despite its vast availability, the efficient recovery and utilization of LGH remains underdeveloped due to its inherently low exergy content and the limitations of traditional heat recovery technologies. The creation of cutting-edge materials and creative system-level approaches for LGH recovery has accelerated significantly as companies continue …
Published in International Journal of Energy and Thermal Applications · Vol. 3, Issue 1, 2025 · pp. 24–29 Read article
-
Nano-Chemical Revolution in Vaccinology: A Study
Abstract: The development of traditional vaccines, reliant on attenuated pathogens or purified proteins, has historically been limited by slow development timelines, poor stability, and low immunogenicity requiring potent, often non-specific, adjuvants. This synthesis argues that the convergence of nano-material science and meticulous chemical engineering represents the next major paradigm shift in preventative medicine. Nano-materials, particularly Lipid Nanoparticles (LNPs) and various polymeric or inorganic scaffolds, have transitioned from theoretical constructs to essential …
Published in Research and Reviews : A Journal of Immunology · Vol. 16, Issue 1, 2026 Read article
-
Investigation of Mechanical Properties of Concrete Using Agriculturally Based Waste and Fibers as Additives
Abstract: In today's world one of the most common man-made materials widely used as concrete. Around 1 ton of concrete is produced every year for an individual person. Concrete is composed of mainly cement, fine aggregates, coarse aggregates & water. As the construction industry is the 2nd biggest industry, environmental and social responsibility contributes to the sustainable development. Bamboo leaf ash has received recent interest as an agricultural waste with pozzolanic …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 9–18 Read article
-
Cementing Sustainability: Utilizing Waste Foundry Sand to Enhance Concrete Performance and Reduce Environmental Impact
Abstract: The incorporation of waste foundry sand into concrete production represents an environmentally conscious and cost-effective approach. This method involves substituting discarded foundry sand for a portion of traditional fine aggregates in concrete mixtures. The primary objective is to address environmental concerns associated with waste disposal while simultaneously achieving cost efficiency in construction materials. By integrating waste foundry sand into concrete, this practice promotes sustainability by reducing landfill waste and conserving …
Published in Journal of Construction Engineering, Technology & Management · Vol. 14, Issue 1, 2024 · pp. 13–21 Read article
-
Potential of Particle Size Mix Ratios of Plantain Ogoni Red with Clay Soil: The Integrity of Adsorbent Performance in AGO Treatment in Fresh Water Environment
Abstract: The research is focus on monitoring the performance of various formulated adsorbent mix ratio of clay soil with some agro-based materials in treatment of contaminated water environment. The agro-based material used was Plantain Ogoni Red (POR) and fresh water environment was used for this research. The agro-based material was processed into different particle sizes of 150 𝜇m, 300 𝜇m, 600 𝜇m and 1.18 mm and the clay soil into fine …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 15, Issue 3, 2024 · pp. 12–25 Read article
-
Mechanical Property Assessment of Hybrid Composite Laminates Composed of Jute Glass Fibers in Combination with Flax, Hemp, Sisal and Kenaf Fibers Using the Hand Layup Technique
Abstract: The present work compares the properties of various hybrid composite laminates manufactured using the hand layup technique and addresses their production process, based on glass fiber as the exterior layer and natural fibers (flax, hemp, kenaf, jute, and sisal) as interior layers, in an epoxy resin. Five stacking sequences A-GJJJJG, B-GFJJFG, C-GHJJHG, D-GKJJKG, and E-GJSSJG were used to prepare the test specimens. According to ASTM guidelines, experiments were performed to …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 103–113 Read article
-
Influence of Hybrid Fiber Reinforcement on the Interfacial Bonding and Fracture Toughness of Epoxy-Based Polymer Composites Under Cyclic Loading
Abstract: This study investigates the influence of hybrid fiber reinforcement on the interfacial bonding and fracture toughness of epoxy-based polymer composites under cyclic loading. Carbon, glass, and aramid fibers, both individually and in hybrid combinations, were incorporated into the epoxy matrix to evaluate their thermal, mechanical, and fatigue-resistant properties. Thermal characterization revealed distinct material behaviors, with carbon fibers exhibiting superior thermal conductivity, while glass and aramid fibers provided enhanced thermal stability. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 799–824 Read article
-
Performance Analysis of Graphene Reinforced Sug-ar-Alcohol Based PCM for Thermal Energy Storage System
Abstract: The thermal-conductivity of the Phase Change Materials (PCMs) of thermal heat storage systems is improved by distributing nano-particles in the basic PCM for a faster rate of heat transfer. During the charging and discharging procedures, the heat transfer properties of the newly created Sugar-Alcohol based PCM dispersed with 1.0 wt% graphene nanoparticles in a shell and helical tube storage tank were examined. The helical tube configuration caused the melting and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 133–147 Read article
-
Assessing the Mechanical, Structural and Thermal Performance of Boehmeria Nivea and Agave Sisalana Fiber Reinforced Polymer Composite by using Seashell Powder as a Filler Material
Abstract: Natural fiber composites have replaced plastics and have been used to the maximum extent. Hybridization of natural fibers with filler materials has achieved higher tensile, impact, and flexural strength compared to single fiber composites. In this research, the mechanical properties were investigated with the ramie and sisal hybrid fiber reinforced with seashell powder as filler material. Filler material can enhance the flexural property of the natural fiber. Hybrid composite plates …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 355–369 Read article
-
Particle Size Effect on the Physicochemical Parameters of Water Media in Treatment of Contaminants of AGO and PMS
Abstract: Some of the physicochemical properties of contaminated water media with AGO and PMS was monitored upon the particle size effect and mix ratio. The physiochemical parameters monitored are potassium ammonia, iron and manganese concentration upon the performance of the formulated adsorbent immersed in the salt water and fresh water medium. The investigation demonstrates the occurrence of leaching in the process, which shows that some of the parameters adsorbed by the …
Published in Journal of Petroleum Engineering & Technology · Vol. 14, Issue 2, 2024 · pp. 27–36 Read article
-
3D Printing in the 21st Century: A Critical Review of Advances and Impacts Across Sectors
Abstract: 3D printing, or additive manufacturing, has become a pivotal technology in the 21st century, reshaping a variety of industries. This review critically examines the technological advancements that have driven the widespread adoption of 3D printing, including innovations in printing materials, precision, and speed. In sectors like healthcare, aerospace, automotive, and consumer goods, 3D printing has revolutionized product development, enabling rapid prototyping, customizations, and more efficient manufacturing processes. In healthcare, for …
Published in Trends in Mechanical Engineering & Technology · Vol. 15, Issue 1, 2025 · pp. 18–24 Read article
-
Self-Healing Polymer Composites for Pharmaceutical Packaging Applications
Abstract: Pharmaceutical packaging plays a crucial role in ensuring the safety, stability, and effectiveness of pharmaceutical products. Conventional polymer-based packaging materials are prone to mechanical damage, microcracks, and environmental degradation, which can compromise drug integrity. Self-healing polymer composites (SHPCs) offer a promising solution by enabling autonomous or stimuli-responsive repair mechanisms that restore packaging integrity, enhance durability, and extend product shelf life. These materials function through intrinsic mechanisms, such as dynamic covalent …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 648–658 Read article
-
The Review of Beetroot Composition and Benefits of Beetroot
Abstract: The genus Beta L. comprises the red beetroot, which is linked to the Betoideae branch of the goosefoot family (Amaranthaceae). Because the tuberous root of the vegetable beetroot (Beta vulgaris L.) contains a large amount of nutrients, including vitamins and minerals as well as substances with physiological activity, including betalain, inorganic nitrates, polyphenols, and folates, it is consumed in every country around the world. Like its relative turnip, the beet …
Published in Research and Reviews : A Journal of Ayurvedic Science, Yoga and Naturopathy · Vol. 12, Issue 3, 2025 · pp. 35–42 Read article
-
Experimental and Polynomial Regression Modelling of Tensile Characteristics of Hybrid Jute/Hemp Fiber Composites
Abstract: The present study aims to develop hybrid jute-hemp fiber/epoxy composites by the hand lay-up process with 60% of fiber reinforcement and 40 % of matrix ratio. To measure the change of tensile properties, prepared hybrid composites were tested for normal tensile strength and edge notch tensile (ENT) test as per the ASTM standards. Findings show that, developed composites with reported tensile strength followed by comparing it with fracture toughness. Experimentally, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 47–58 Read article
-
Combine Effect of Metakaolin, Recycled Steel Fiber and Waste Glass Powder on Mechanical Properties of Concrete
Abstract: This study investigates the combined effects of metakaolin, recycled steel fiber, and waste glass powder on the mechanical properties of concrete. Specifically, the research explores concrete mixes with metakaolin, crushed glass powder at 9%, 12%, 15%, and 18%, and recycled steel fiber at 0.5%, 1%, 1.5%, and 2% as partial replacements for cement. The primary aim is to identify the optimal mix proportions that enhance the compressive strength, flexural strength, …
Published in Journal of Construction Engineering, Technology & Management · Vol. 14, Issue 3, 2024 · pp. 7–17 Read article
-
Mechanical & Tribological Characterization of Al2024-Alumina-Graphite Reinforced Monolithic and Hybrid Composites
Abstract: This work investigates the mechanical characteristics of Al2024-Al2O3-Graphite reinforced monolithic and hybrid composites fabricated by the stir casting method. Exploratory work involved the fabrication of monolithic composites with varying Al2O3 contents (5-8 wt%) and hybrid composites with the ratios of Al2O3 (2-6 wt%) and Graphite (1-3 wt%) in matrix Al2024. For improving their dispersion, preheated reinforcement particles were introduced in matrix alloy at controlled stirring rates. A homogeneous particle distribution …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 823–836 Read article
-
Microstructural Characterisation and Analysis of Mechanical Behaviour of Hybrid AA 7075/7178 Fabricated Using Die Casting Technique
Abstract: AA are being increasingly used in the field of structural engineering owing to their desirable mechanical properties coupled with their recyclable and sustainable nature, thus contributing significantly towards reduction of carbon footprints and development of circular economy. Till date numerous research projects have been prompted to investigate the structural performance of aluminium alloy structures and develop alternatives with enhanced performance parameters. AA 7xxx (Al-Zn-Mg-Cu) are being widely used in variety …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 441–451 Read article
-
Formulation and Evaluation of Polyherbal Soap with Antibacterial and Dermatological Benefits: A Polymer Chemistry Approach
Abstract: This study investigates the formulation and evaluation of polyherbal soap composed of extracts from Vitex negundo, Azadirachta indica, and Curcuma longa. These plants possess significant antibacterial, dermatological, and skin-nourishing properties. The soap formulation follows a saponification process using coconut oil and sodium hydroxide as primary reactants, incorporating polymer chemistry principles in soap structuring and stability. Polymers such as polysaccharides and fatty acid chains contribute to the stability, viscosity, and foaming …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 158–164 Read article