Search
1212 articles for “CdCl2.H2O Salt Reinforcement”
Nothing matched all of your words, so these match any of them.
-
Effectiveness of Concrete Retrofitted with FRP Wrapping Subjected to Higher Temperature
Abstract: This work aims to provide additional insight into the behavior of fiber-reinforced polymer (FRP) laminates at high temperatures. The compressive properties of concrete coated in fiber-reinforced polymer (FRP) under elevated heat levels. The study addresses the important issue of assessing the performance of structural elements, specifically concrete columns, in the event of a fire. Recently, there has been increased interest in fiber-reinforced polymer (FRP) composite materials as a possible concrete …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 17–28 Read article
-
Effect of Multiwalled Carbon Nanotubes on Compressive Strength of Concrete
Abstract: The objective of the suggested study was to examine the possible application of multi-walled carbon nanotubes (MWCNTs) as nano reinforcement to improve concrete's compressive strength. Single-walled carbon tubes (SWCNTs) and multi-walled carbon tubes (MWCNTs) are two groups of cylindrical-shaped carbon allotropes known as carbon nanotubes (CNTs). Tests are carried out 7, 14, and 28 days after the MWCNTs are reinforced in M20 grade concrete at 0.02% and 0.025% (by weight …
Published in Journal of Materials & Metallurgical Engineering · Vol. 14, Issue 2, 2024 · pp. 01–08 Read article
-
Novel Amino Silanes for Inhibition and Dissolution of Aldol Polymer for Caustic Tower in Cracker Plant
Abstract: Aldol polymer fouling in petrochemical plant is an undesirable process, which needs to be removed for increasing the efficiency of downstream process. In this paper, inhibition and dissolution efficiency of the aminopropyl trimethoxy silane (APTMS), aminopropyl triethoxy silane (APTES), sodium salt of aminopropyl trimethoxy silane (SS-APTMS), sodium salt of aminopropyl triethoxy silane (SS-APTES) were studied at different molar ratio of vinyl acetate (VA):amino alkoxy silane (antipolymerant). The sodium salt of …
Published in Journal of Petroleum Engineering & Technology · Vol. 15, Issue 1, 2025 · pp. 35–48 Read article
-
Performance of GFRP Bars in Flexural Members: A Comparative Study with Metal Bars Using FEA and Experimental Study
Abstract: In recent years, GFRP bars have been introduced as a replacement for metal bars as reinforcement in flexural members. This study evaluates the use of GFRP bars as the main reinforcement in flexural members such as beams through computer simulations and experimental work. A 4-meter beam from a sample structure, analyzed as per IS 875 (1987) Part 2, was considered for the study. This beam was designed considering both metal …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 262–267 Read article
-
Enhancing Thermal and Mechanical Performance of Polymer-Based Phase Change Materials with Graphite Nanoplatelets: A High-Efficiency Approach for Energy Storage Applications
Abstract: This study explores the performance enhancement and characterization of polymer-based phase change material (PCM) composites reinforced with graphite nanoplatelets (GNPs) for thermal management applications. The integration of GNPs significantly improved thermal conductivity, which increased from 0.38 W/m·K in pure PCM to 2.60 W/m·K with 10 wt% GNPs, marking a 580% improvement. Differential Scanning Calorimetry (DSC) analysis revealed a reduction in latent heat capacity from 180 J/g to 150 J/g—approximately 16.7%—attributed …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 150–162 Read article
-
Fabrication and Analysis of Al 7075 Based Metal Matrix Composites - A Review
Abstract: Aluminium 7075 alloys are extensively used in aerospace, marine, aviation, and automotive industries due to their superior mechanical properties, high strength-to-weight ratio, and low density. However, to further enhance their performance, aluminium-7075 metal matrix composites (AMMCs) are developed by incorporating various reinforcements. This paper focuses on the influence of reinforcements on the mechanical, tribological, and corrosion behavior of AMMCs. The study examines fabrication techniques, particularly the stir casting method, which …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 1–12 Read article
-
Red Mud Particles' Impact on the Mechanical Properties and Microstructure of AA6005 Composites for Brake Rotor Applications
Abstract: There is increasing focus on utilizing industrial waste as reinforcement in metal matrix composites, driven by the demand for eco-friendly and cost-effective materials in automotive applications. With an emphasis on their possible use in braking rotors, this study examines how red mud particles affect the microstructure and mechanical characteristics of AA6005 aluminum alloy composites. Red mud, a byproduct of the Bayer process, is a good low-cost ceramic reinforcement because it …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 573–581 Read article
-
Investigation of the independent and combined roles of Gr and ZrO₂ on strengthening behaviour of Al-7075 Composites
Abstract: This study investigates the effect of individual and hybrid reinforcements on the mechanical and microstructural behaviour of Al7075 composite fabricated using the 2-step stir-casting technique. Four compositions were made with the base Al-7075, Al-7075 3 weight % ZrO2, and Al-7075 3 weight % Gr as well as a hybrid composite Al7075 with 3 wt.% Gr, 3 wt.% ZrO2. 2-step stir-casting was used to increase the wettability of the particles, decrease …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1060–1075 Read article
-
Experimental Investigation of Water Absorption and Mechanical Behavior of Bamboo Fiber Based Polymer Composites
Abstract: The objective of this research is to assess the suitability of bamboo fibers as a sustainable alternative to synthetic and wood fibers for reinforcing polymer composites. Plant-based fibers, particularly bamboo, offer advantages such as biodegradability, lightweight nature, abundance, and impressive mechanical properties that rival or surpass those of conventional materials. In this study, special focus is placed on the extraction of long fibers from Dendrocalamus giganteus, using a combined mechanical …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1471–1481 Read article
-
Multi Objective Optimization of Aluminium (AA6061-SiC-Flyash) Metal Matrix Composites using TOPSIS Method
Abstract: Metal Matrix Composites (MMCs) have significant interest due to their superior mechanical properties, including improved strength, hardness, and fracture resistance. This study investigates the optimization of the mechanical and fracture behaviour of casted AA6061-SiC-Fly Ash (FA) MMCs using the TOPSIS method. Silicon carbide(SiC) and fly ash (FA) reinforcements, with different weight percentages of 5%, 10%, and 15% were fabricated through sand casting method. Total 10 combinations of composites are prepared …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 459–469 Read article
-
Mechanical Performance Evaluation of Brachyuran Shell Particle-Infused S-Glass Fibre Epoxy Polymer Composites
Abstract: Epoxy composites bio-filled with brachyuran crab shell powder and reinforced with S-glass fibres at different loadings (2%, 4%, and 6%) are tested for their mechanical properties in this work. Using modest amounts of filler significantly improved hardness, ultimate tensile strength, and flexural strength in the empirical data. The largest increase in hardness was 64.42% at 4% filler, up from 26.22% at 2%; however, there was a dramatic decrease to 13.11% …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 500–507 Read article
-
Experimental Exploration of Crack and Damage Dynamics of Hybrid FRP Nano Composites
Abstract: Fiber-reinforced polymer (FRP) composites have become essential materials in modern engineering structures because of their excellent strength-to-weight ratio, corrosion resistance, and adaptability in design. Among different fracture modes, Mode I interlaminar fracture where cracks propagate under tensile opening stresses is one of the most critical forms of damage in layered composites. Since delamination occurs within the matrix-rich regions between plies, improving the matrix properties plays a key role in enhancing …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 220–232 Read article
-
Deep Learning for Real-Time Monitoring and Defect Detection in Additive Manufactured Polymer Composites
Abstract: Additives Fiber-reinforced polymer composite ADDs have high utility in making lightweight structural components, but due to process-related defects (interlayer delamination and reinforcement stacking) the integrity of consolidation during extrusion-based deposition is frequently compromised. This paper has presented a physics-informed deep learning framework that is applicable to real-time measurements of reinforced thermoplastic composite fabrication. Multimodal sensing was provided with thermal gradient, optical morphology, and acoustics emission signals being used to assess …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 974–999 Read article
-
AI-Driven Prediction of Square-Hole Laser Trepanning Performance in AA7075/15%SiC/15% Glass Fiber Hybrid Composites Using Taguchi–ANOVA and Deep Neural Networks
Abstract: Hybrid AA7075 composites reinforced with 15% silicon carbide (SiC) and 15% glass fiber were fabricated via the stir casting technique to improve machining and structural performance. The addition of dual reinforcements into the aluminum matrix was aimed at enhancing hardness, thermal stability, and surface quality during non-traditional drilling operations. Square-hole drilling was performed using a laser trepanning process, and the key responses—hole size accuracy, surface roughness, and taper angle—were systematically …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1932–1943 Read article
-
Performance Based Seismic Evaluation of G+12 RCC Structures in Seismic Zone IV with and without Corner Shear Walls Considering Soil Types I, II, and III
Abstract: Seismic behavior of multi-storey buildings is significantly influenced by structural stiffness and supporting soil conditions. This study investigates the seismic response of a G+12 reinforced concrete building by comparing two structural configurations, namely buildings with shear walls and buildings without shear walls, under three soil conditions: Type I, Type II, and Type III soils. The analysis is carried out using the response spectrum method in accordance with IS 1893 (Part …
Published in Recent Trends in Civil Engineering & Technology · Vol. 16, Issue 2, 2026 · pp. 1–14 Read article
-
Wear and Tribological Characteristics of Novel Metal Matrix Composites
Abstract: The development of advanced metal matrix composites (MMCs) with enhanced tribological performance has become increasingly important due to the premature failure of critical engineering components operating under severe wear conditions in automotive, aerospace, marine, defense, and power generation systems. Conventional composites such as Copper–Alumina and Aluminium–Silicon Carbide have demonstrated improved mechanical and wear characteristics; however, their widespread application is often limited by issues including particle agglomeration, non-uniform reinforcement distribution, porosity …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1326–1346 Read article
-
Synthesis and Structural Characterization of Nanocrystalline CeO2 and Ce0.95Cu0.05O2 Solid Solution Catalysts Properties and its Applications
Abstract: The Main study and the development of CeO2 and Cu doped CeO2 nanocrystals containing transition-metal species are of crucial importance for understanding the preparation and fabrication of CeO2 and Cu doped CeO2 nanoparticles by solution combustion technique to taken glycine as fuel. Here, we have investigated the effect of Cerium dioxide and Cu dopant ions on the structural properties of Ce1-xCuxO2 nanocrystals (NCs) synthesized via co-precipitation technique. XRD results confirmed …
Published in Journal of Catalyst & Catalysis Read article
-
Comprehensive Study on the Mechanical and Tribological Response of Waste Tyre Rubber–Natural Fiber Hybrid Epoxy Composites
Abstract: Research into the mechanical and tribological characteristics of Prosopis juliflora-fiber reinforced epoxy-matrix composites with recycled tyre rubber particles is the focus of this investigation. Making use of old tire rubber and bio-reinforcing with fibers from the common invasive plant Prosopis juliflora are the goals of the two-reinforcement techniques. The end goal is to produce long-lasting, cost-effective engineered composite materials with improved performance. A constant epoxy resin matrix was used to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 154–161 Read article
-
Production of Polymer Composite using Thermoplastics, Sharp Sand and Sawdust: Mix Techniques
Abstract: This research work focuses on producing a polymer composite using a thermoplastic. PET is nonbiodegradable and contribute majorly to water and land pollution in this research work an attempt has been made to utilize PET waste plastic in manufacturing fibre-reinforced polymer composite by combining sawdust which is another waste product from woodwork operations and sand, a major component in construction, whose use is greatly threatening the ecosystem. The fibre-reinforced polymers …
Published in Emerging Trends in Chemical Engineering · Vol. 9, Issue 3, 2022 · pp. 21–29 Read article
-
Experimental Study on Compressive Strength of Ferrocement
Abstract: AbstractFerrocement construction technology is quite popular throughout the world. Ferrocement as thin material can be used as building components as well as a repair material. Ferrocement composite consists of cement-sand mortar with wire mesh to produce elements of small thickness having high durability, resilience and when properly shaped, it has high strength and rigidity. Ferrocement differs from conventional reinforced concrete or prestressed concrete primarily on the basis of nature, placing …
Published in Journal of Construction Engineering, Technology & Management · Vol. 7, Issue 3, 2017 · pp. 25–29 Read article