Search
478 articles for “R Glass”
-
Experimental Investigation on Tensile Characteristics of Hybrid Nanocomposite Joints by FSW with Optimized Welding Parameters
Abstract: Aluminium based nanometal matrix composites have emerged as highly promising class of materials in the field of materials domain, gaining importance mainly due to their low cost, isotopic properties and easy secondary processing. Cast aluminium matrix particle-reinforced composites have higher specific strength, specific modulus and good wear resistance when compared to unreinforced alloys. Continuous metal matrix phase facilitates controlled distribution of one or more nano-reinforcement materials. There are several conventional …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 9, Issue 2, 2019 · pp. 71–82 Read article
-
Seasonal assessment of creeks' water quality located near Ankleshwar region of Gujarat, India, through water quality index
Abstract: The world is nowadays facing serious problem of pollution due to the rapid industrialization, urbanization and improper use of pesticides in agriculture. As far as India is concerned, it is one of the developing nations which has highest industrial and urbanization growth rate due to which few states of the India are critically polluted. In Gujarat state, Ankleshwar is one of them, which houses around 3000 small, medium and large …
Published in Journal of Water Pollution & Purification Research · Vol. 5, Issue 1, 2018 · pp. 31–53 Read article
-
Performance and Robustness of Wind Turbine Blades Composed of Recovered Waste Carpet Fiber Polymer Composites
Abstract: Carpets stay in good condition for ten to fifteen years, after which they wear out and are discarded. The large amount of used carpet waste is often dumped in landfills, causing health risks, air pollution, and other environmental problems. To reduce the growth of landfill sites, it is essential to implement recycling measures for carpet waste, protecting the environment by reusing these materials in new products. Carpet are made from …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 53–66 Read article
-
Development and Analysis of Novel Silver Ion-Conducting Glass-Polymer Electrolytes
Abstract: The development of efficient and stable solid electrolytes is crucial for advancing energy storage technologies such as solid-state batteries and electrochemical devices. In this study, a novel series of silver ion-conducting glass–polymer electrolytes (GPEs) based on the composition (1–x) PEO: x[0.75AgI:0.25(Ag₂O:WO₃)] with x ranging up to 50 wt.% was synthesized and thoroughly analyzed. Unlike conventional techniques such as solution casting or sol–gel methods, these GPEs were fabricated using an innovative …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 600–605 Read article
-
Novel Porous Refractory Synthesized from Diatomaceous Earth and Rice Husk Ash
Abstract: Refractory materials are products used in thermal equipment to protect the fire and prevent heat loss to the outside environment. Thermal equipment such as driers, ceramic kilns, glass or metal furnaces and others always consume high heat in the combustion of the fuel. If the thermal equipments have high heat loss which cause wastes of fuel and increases production costs. Therefore, researchers are always looking for a solution to minimize …
Published in Journal of Polymer & Composites · Vol. 8, Issue 2, 2020 · pp. 128–137 Read article
-
High-Performance Carbon Nanotube-Reinforced Biodegradable Polymer Composites for Packaging
Abstract: The growing issues concerning the properties of petroleum-based plastics on the environment increased the demand for biodegradable alternatives and polylactic acid (PLA) is one of the most promising options available. However, its poor toughness, thermal resistance, and barrier properties limit broader applications in sustainable packaging. This study reports the fabrication and characterization of PLA-based nanocomposites reinforced with carbon nanotubes (CNTs) at varying loadings (0.1-2 wt.%). Structural analysis (FTIR, XRD) confirmed …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 183–194 Read article
-
Development of Polymersomes as Macromolecular Platforms for Nanomedicine
Abstract: The conventional method of drug delivery is plagued with instability, low targeting and low bioavailability. A solution to these shortcomings is the use of polymersomes, artificial vesicles that are produced through self-assembly of amphiphilic block copolymer, and they are suggested as universal nanoscale carriers. They have stiff, tunable membranes (thickness = 2–50 nm) due to accurate control of polymer chemistry, chain length, and hydrophilic mass fraction (f), which allows predictability …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 · pp. 71–89 Read article
-
TiO₂ Nanostructured Material-based Gas Sensor for Detecting Oxygen and LPG Gases
Abstract: This Paper investigates the use of TiO2 nanowires and nanotetrapods on glass and silicon substrates for sensing combustible gases such as LPG (Liquid Petroleum Gas) and Oxygen. The growth of Titanium dioxide (TiO2) nanowires/nanorods/nanotetrapods was investigated using both physical and chemical methods. In thermal evaporation method, both with and without vacuum conditions, was employed to synthesize various TiO2 nanostructures. A vacuum coating machine was utilized to create uniform TiO2 thin …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 443–451 Read article
-
Biomedical Waste Management in Laboratory
Abstract: Laboratories like diagnostic, pathology, biochemistry, microbiology and blood bank use to generate large amount of biomedical waste (BMW). Study should be done on this waste and it was found that anatomical, microbiological, waste from sharps, soiled and chemical waste is generated from labware washing and laboratory cleaning. Puncture proof containers are used for collecting needle sharps which are further autoclaved and then send to needle pit for disposal. In sharp …
Published in Research and Reviews : A Journal of Medical Science and Technology · Vol. 9, Issue 2, 2020 · pp. 1–6 Read article
-
Evaluation of Malting Potential of Different Barley Varieties
Abstract: The grain and malt quality parameters of six malt barley variety were studied. This study was conducted to estimate the malting potential of different barley varieties (Beka, Holker, HB120, Bahate, Bokoji, and Sabini) collected from Kulumsa Agricultural Research Center. All the grain and malt quality parameters were conducted in the laboratory of Food Technology and Process Engineering at the IOT, Bahir Dar University. The three stages of malting (steeping, germination, …
Published in Journal of Water Pollution & Purification Research · Vol. 6, Issue 3, 2019 · pp. 24–35 Read article
-
Experimental Study of Solar Still with Rotating Wick to Increase Productivity
Abstract: In the present work, an attempt is made to enhance the productivity of the conventional basin type single slope solar still using a vertical rotating wick. A rotating wick (Jute cloth) belt is integrated against the still back wall to act as an additional evaporation area. A set of experimental tests are carried out by applying constant heat flux using halogen bulbs and by varying the brackish water height in …
Published in Journal of Thermal Engineering and Applications · Vol. 8, Issue 1, 2021 · pp. 54–61 Read article
-
Investigation of Mechanical Properties of Hollow Bricks Incorporating Aerated Aggregates: A Polymer-Cement Composite Approach
Abstract: The rapid advancement of construction technologies has necessitated the development of lightweight, thermally efficient, and sustainable building materials. Hollow bricks, due to their inherent voids, offer substantial reductions in dead load and enhanced insulation properties. However, their mechanical performance often falls short when compared to conventional solid bricks. To address this limitation, this study explores the synergistic integration of aerated aggregates and polymer-cement composites (PCCs) in hollow brick production. Aerated …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 92–105 Read article
-
Eco-Friendly Concrete: A Review
Abstract: In the last decades, the use of residue in civil construction, especially in addition to concrete has been studied by many researches related to, besides to reduce the environmental polluter’s factors. This may lead several improvements of the concrete properties. In recent years increasing attention towards utilizing less energy intensive materials, such as fly ash, rice-husk ash, condensed silica fume and slag, in combination with cement to achieve energy saving. …
Published in Recent Trends in Civil Engineering & Technology · Vol. 5, Issue 1, 2015 · pp. 1–7 Read article
-
Optimization of gas sensitivity of CuO/carbon composites with carbon particles synthesized from acacia auriculiformis branches
Abstract: Carbon particles fabricated from the core of acacia tree branches were utilized to synthesize CuO/carbon composite films. The gas sensing properties of these films grown on glass substrates using the doctor blade method were measured in 1000 ppm of methanol vapor at the room temperature. All the films were annealed at 75 0C for 1 hour in air. The structure, the optical band gap and the surface morphology of the …
Published in International Journal of Membranes · Vol. 1, Issue 1, 2024 · pp. 22–30 Read article
-
Optical Characteristics of Amorphous Se-Ge-Ag Thin Films
Abstract: AbstractDetailed studies on impurity dependence of the optical structural properties have been carried out on Se-Ge-Ag thin film samples prepared by thermal evaporation technique. The effect of the addition of varying amounts of silver in concentrations from 5 to 15 molar percent to Se-Ge system were analyzed systematically under the room temperature. The optical transmission and reflection spectra of these films were measured in the range of 300–900 nm. The …
Published in Trends in Opto-electro & Optical Communication · Vol. 6, Issue 3, 2016 · pp. 33–38 Read article
-
Polymer Chemistry-Driven Design of a Severable Dental Prophylaxis Instrument: Leveraging PEEK and Composites for Enhanced Functionality
Abstract: Polymer chemistry unlocks new possibilities for dental prophylaxis instruments by leveraging molecular design for enhanced functionality. This study explores Polyether Ether Ketone (PEEK), a semi-crystalline thermoplastic, in a novel instrument with a severable working end, featuring a tubular structure with internal screw threads (0.5–0.8 cm) anchoring replaceable elements via a threaded mechanism. PEEK’s aromatic backbone, alternating ether and ketone groups, yields a tensile strength of ~100 MPa, chemical inertness against …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 869–877 Read article
-
Axial Compression Behavior of Aluminum (Al), Glass/Epoxy (GFRP) and Hybrid Al-GFRP Crash-box: An Experimental and Digital Image Correlation Approach
Abstract: The study aims to understand the axial compression characteristics and fracture of cylindrical Aluminum (Al), Glass/epoxy (GFRP) composite and Hybrid Al-GFRP crash-boxes. The hollow Al tubes are fabricated by rolling and bonding a thin aluminum sheet followed by rivet joints. The GFRP samples are manufactured using the wet-hand layup technique followed by the vacuum bagging method. Hybrid samples are manufactured by covering GFRP tubes with aluminum sheets on the outer …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 304–313 Read article
-
Comparative Study of Strength of Normal Beam and Strength of Glass Fibre Wrapped Beam
Abstract: In the present work, strength of normal beam is compared with strength of glass fibre wrapped beam to check efficiency of glass fibre wrapping in earthquake prone areas. There are several methods which can be used efficiently in the re-strengthening of RCC members such as fibre reinforced polymer wrapping, by using steel strips at various spacings to increase member strength and from increasing the existing member dimensions or sizes by …
Published in Recent Trends in Civil Engineering & Technology · Vol. 8, Issue 2, 2018 · pp. 28–40 Read article
-
An Overview of Surface Coating Methodologies and Their Use in Technical Materials
Abstract: To safeguard the product or structure against chemical harm, a variety of procedures and materials can be applied in coating applications today. Nowadays, coatings are used extensively in manufacturing all over the world to increase efficiency and reduce expenses two factors that are essential to preserving the sector's profitability. Coated materials have greater strength compared to uncoated materials. A variety of materials, including bio glass, polymers, ceramics, strong and hard …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 19–35 Read article
-
Effect of Thickness of Absorber Layer on the Enhancement of Efficiency, and Performance of CH3NH3SnI3 based Perovskite Solar Cell using SCAPS-1D
Abstract: The present research article deals with the improvement of efficiency, and performance of tin based perovskite solar cells (PSCs) using SCAPS-1D software. SCAPS-1D has been used for investigating the absorber layer of the inverted p-i-n arrangement of tin based perovskite solar cells. The inverted p-i-n solar cell arrangement are Glass/ITO/NiO/CH3NH3SnI3/ PCBM/AL where ITO, NiO, CH3NH3SnI3, PCBM and Al are transparent conducting oxide, hole transporting layer (HTL), absorber layer and electron …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 11, Issue 4, 2021 · pp. 1–7 Read article