Search
481 articles for “reinforced composites”
-
Recyclable Vitrimer-Matrix Carbon Fibre Composites for Aerostructures: Reprocessing Efficiency and Retention of Mechanical Performance
Abstract: To begin, carbon fiber reinforced polymers (CFRP) have become an important part of the structural loading in many modern aircraft; however, due to their permanent cross-linking in thermosets, they cannot easily be restored after being retired. Vitrimers have been proposed as a solution since their Covalent Adaptable Networks (CANs), rearranged by associative exchange, may be reshaped, welded, repaired or dissolved without damaging the CFRP fibers. This paper reviews whether the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Comparative Environmental and Economic Assessment of Wind Turbine Blade Materials
Abstract: Wind energy has proven to be one of the most stable and non-polluting renewable energy sources to mass power production. For energy production wind turbine is an essential part of the wind power plant. The choice of the blade material and coating applied on it has a strong impact on aerodynamic performance, mechanical strength, fatigue life, manufacturing possibility, and environmental effects throughout the operating life of the turbine. Hence, authors …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 91–99 Read article
-
Design Analysis of PALF Natural Fiber Composite Laminate under Tensile Loading Condition using Simulation Approach
Abstract: Plant-based fibre reinforced materials are increasingly being employed for a variety of structural and non-structural purposes. Plant and animal-based fibres have different characteristics depending on a variety of circumstances. Mechanical qualities are primarily determined by parameters such as matrix, fillers, fibre content, fibre treatment, and fabrication techniques. The present work aim in analyzing the PALF natural fiber using simulation approach. In the process laminates are prepared as per ASTM standards …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 1, Issue 2, 2023 · pp. 23–29 Read article
-
Behavior of SFRC composite pile resting on sloping ground of cohesive and non-cohesive strata
Abstract: Reinforced concrete piles are increasingly being utilized in situations where there is a need to transfer loads in deep strata, particularly for infrastructure projects built on sloping grounds. The present study comprises a finite element analysis (FEA) to investigate the lateral load-bearing capacity of steel fiber reinforced concrete (SFRC) pile, embedded in sloping grounds with sandy and clayey soils. The lateral load capacity of the steel fiber reinforced concrete pile …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 19–31 Read article
-
Magnetorheological Composite Dampers for Railway Wagon Suspension: Modelling Validation and Performance Analysis
Abstract: Railway wagons encounter continuous vibrations due to track irregularities, resulting in reduced ride comfort and higher dynamic loads. Conventional suspension systems based on springs, hydraulic dampers, or air suspensions provide only limited vibration mitigation. This work investigates the application of magnetorheological (MR) fluid-based dampers, where a polymeric carrier oil (silicone oil) reinforced with carbonyl iron particles serves as a smart composite suspension medium. The MR fluid is synthesized and characterized …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 43–63 Read article
-
Experimental Assessment and Statistical Argument of Al-Si/CSA/MoS2 Hybrid Composites for Mechanical and Tribological Characteristics
Abstract: To augment the mechanical and tribological properties of Al-Si matrix composites complement with molybdenum disulphide (MoS₂) and coconut shell ash (CSA), a mixed experimental and Face-Centered Composite (FCC)strategy was employed. A liquid metallurgical method called stir casting was used to create hybrid composites with 5–15 wt.% CSA and 1–3 wt.% MoS₂. A FCC experimental design with thirty runs was used to thoroughly evaluate the materials. This design allowed for the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 792–802 Read article
-
Development of a Durable Superhydrophobic EP/PDMS Coating Reinforced with Micro-CaCO₃ and Nano-ZnO for Enhanced Corrosion Protection and Multifunctional Performance on Carbon Steel
Abstract: Balancing exceptional multifunctional performance with mechanical robustness in micro-nano composite films remains a significant challenge for practical applications. In this work, a superhydrophobic coating reinforced with micro-CaCO₃ and nano-ZnO particles was fabricated through a versatile single-step brushing method. The optimized EP/PDMS@micro-CaCO₃/nano-ZnO coating achieved a water contact angle (WCA) of 173.54° ± 2.53° and a sliding angle (SA) of 1.50° ± 1.12°. Owing to its carefully engineered micro-nano hierarchical structure, the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 216–238 Read article
-
Substantial Enrichment of Mechanical, Thermal and Electrical Properties of Thermoplastic Polyester Elastomer by Melt Blending with Nano-ZnO
Abstract: Polymers are more reinforced with nano metal oxides, a completely flexible composite of engineering that simplifies the way of exhibiting good mechanical and chemical features. Polymer mixtures represent a very vital field in the handling of innovative ingredients, which have better features than net polymers. Polymer mixtures are able to deliver ingredients with prolonged useful features beyond the range that can be achieved from a single polymer equivalent. A methodical …
Published in Emerging Trends in Chemical Engineering Read article
-
Mechanical Characterization of Kevlar 49 and Pina Fiber Hybrid Composites
Abstract: The pursuit of sustainable yet high-performance materials has accelerated research into hybrid composites that combine synthetic and natural fibers. This study investigates the fabrication and characterization of a Kevlar 49/Pina fiber hybrid composite using epoxy resin as the matrix. Kevlar 49, known for its exceptional tensile strength and energy absorption, was employed as the face sheet material, while Pina fiber, a biodegradable reinforcement extracted from pineapple leaves, was incorporated as …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 301–316 Read article
-
Sustainable Epoxy Composites Enhanced by Cellulose Nanocrystals for Structural and Thermal Applications
Abstract: This study presents the advancement and behaviour analysis of sustainable nanocomposites reinforced with cellulose nanocrystals (CNCs), a biodegradable and high-aspect-ratio nanofiller derived from microcrystalline cellulose. CNCs were incorporated into a bisphenol-A-based epoxy matrix at varying concentrations (0, 1, 3, 5, and 7 wt%) to assess their influence on mechanical, thermal, and viscoelastic properties. The tensile strength of the composites increased significantly, from 45 MPa for neat epoxy to 65 MPa …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 126–134 Read article
-
Flexural Strength and Drilling Parameter of Natural Fiber Composites with Usage of Epoxy Resin
Abstract: An attempt that has been made to take use of the advantages offered by natural composite materials in light of the fast advancement of research and development in this field over the course of the previous two decades, from the laboratory to the factory floor. During the manufacturing process of laminates, polymer matrices are used, while cotton, jute, and sisal are utilised as reinforcing materials. Epoxy resin is used to …
Published in Journal of Polymer & Composites · Vol. 11, Issue 4, 2023 · pp. 37–45 Read article
-
Composite Solutions for Sustainable Mobility: Aluminum Alloy, Carbon Fiber, and Graphene in Chassis Frame Design
Abstract: This study describes the design and analysis of a chassis frame made of carbon fibre, graphene, and aluminium alloy composite materials. A frame must be able to sustain vibration, shocks, and bending and torsional pressures. This piece of work uses a rectangular cross-sectional area to design a frame. After that, the simulated chassis is taken for investigation using composite materials such as aluminium alloy and carbon fibre reinforced with graphene. …
Published in International Journal of Solid State Innovations & Research · Vol. 1, Issue 2, 2023 · pp. 1–7 Read article
-
Real-time Emotion-aware AI Counseling System with Memory Retention Polymer Composites
Abstract: The availability of mental health services is still a major barrier, with many individuals constrained by financial limitations, social stigma, and a shortage of accessible counselors. This work introduces an emotion-aware AI counselor designed to provide empathetic and personalized emotional support via voice-based interfaces. The system leverages Natural Language Processing (NLP) and sentiment analysis to detect emotional cues from speech and generate contextually appropriate, comforting responses. A key innovation is …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1395–1407 Read article
-
Digitally Tunable Dual-Phase Polymer–PCM Composites for IoT-Based Adaptive Thermal Management in Smart Buildings
Abstract: This study presents the design and development of digitally tunable dual-phase polymer–phase change material (PCM) composites for advanced thermal management in smart building applications. The composite is based on a hybrid polymer matrix comprising thermoplastic polyurethane (TPU) and a crosslinked polyvinyl alcohol (PVA) gel, reinforced with paraffin microencapsulated PCM and hydrated salt PCM to achieve multi-stage thermal energy storage. The polymer composite architecture enables enhanced structural integrity, high encapsulation efficiency …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 147–157 Read article
-
An Analysis of Machining Parameters for Metal Matrix Composite
Abstract: The electro-discharge machining analysis of hybrid Composite is presented in this work. Variables are chosen for the input process parameters. The material removal rate is acknowledged as an output parameter, together with the current, graphite and silicon carbide percentage and pulse on time. We used the Taguchi Method to conduct our experiments. To create the theoretical model and look into how process parameters affect the rate at which material is …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 76–85 Read article
-
Biopolymer–Cement Hybrid Panels from Recycled Paper Mill Reject: Experimental Characterisation and Machine Learning Optimization
Abstract: The increased rate of the accumulation of industrial residues in the developing countries is a major cause of concern for the environment. The current study brings forth the use of industrial residues in the form of the production of eco-friendly building materials as a sustainable approach to their valorization. The valorization of recycled paper mill reject, a cellulose-based biopolymeric industrial residue, is being addressed in this study as a reinforcement …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 67–90 Read article
-
Advances in Nanocellulose-Enhanced Polymers and Composites: Structure, Performance, and Applications
Abstract: The most common biopolymer is cellulose, which can be converted into nanocellulose (NC) the sustainable nanomaterial possessing the outstanding characteristic of biodegradability, renewability, low density, high aspect ratio, and excellent mechanical performance. Such distinctive features make NC a promising filler in polymer and composite systems. Recent developments in the preparation of nanocellulose using various natural and artificial sources have facilitated scalable production processes that have less energy requirements and are …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1610–1623 Read article
-
Fabrication and drilling characterization of Hemp & Grewia-Optiva hybrid composite and comparison with ANN model
Abstract: In recent days the use of natural fibers has increased over synthetic fibers due to various advantages. The alkali treatment for these natural fibers further improves the adhesion between fiber and matrix and greatly enhances the mechanical properties of the composite. The present study involves the fabrication of a hybrid composite using the alkali-treated (5% NaOH concentration) natural fibers – Hemp &Grewia-optiva as reinforcement material and epoxy as a matrix …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 138–146 Read article
-
Recent Progress in Magnesium Hybrid Metal Matrix Composites: Processing, Properties, and Applications
Abstract: Magnesium hybrid composites have emerged as promising materials to meet the growing demands of advanced sectors such as biomedical, aerospace, defense, automotive, electronics, and marine industries. However, the inherent drawbacks of magnesium, specifically low wear resistance, have encouraged scientists to develop magnesium-based MMC with improved mechanical properties and thermal properties. To achieve this, various mixtures of reinforcement are employed. These include ceramics with high strength and wear resistance; solid lubricants …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1287–1301 Read article
-
Considerations on Fractured Edge Dislocations of Mechanical Tested Hand Laid Hemp Flax GFRP Hybrid Polymer Composites with SEM Verifications
Abstract: In this research study, three types of composite samples are made. Hemp-Glass Fiber (C1), Flax- Glass Fiber (C2), and Hemp-Flax-Glass Fiber Hybrid Composite (C3). For proper fibre-to-fiber adhesion and bonding, a 10:1 mixture of glue (LY556) and brace (HY951) was used. Tensile, flexural, impact, double shear, and hardness research is conducted among all the specimen samples. According to ASTM standards, the comparison is made among C1, C2 and C2 respectively; …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 1–19 Read article