Search
1058 articles for “Different Materials”
-
Influence of Nozzle Temperature, Nozzle Diameter, and Layer Height on Tensile and Hardness Characteristics of 3D Printed CF-PLA
Abstract: This research investigates the mechanical characterization of CF-PLA (Carbon Fiber-reinforced Polylactic Acid) composite material produced using Fused Deposition Modeling (FDM) technology. The study investigates the impact of different machine parameters, like nozzle temperature, nozzle diameter, and layer height, on the tensile property and hardness of CF-PLA specimens. A total of 27 samples were produced, each with different combinations of nozzle temperature (190°C, 200°C, and 210°C), nozzle diameter (0.4mm, 0.5mm, and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 674–681 Read article
-
Comparison of Mechanical Properties of Resin-based Dental Composites with Different Filler Types
Abstract: The aim of this study was to evaluate in vitro the influence of nano-sized filler particles and agglomerates of nano-particles (nano-cluster)in resin-based dental composite material. Four commercially available resin-based dental composites – Filtek Z250, Filtek Supreme, Filtek Z100 (3M ESPE, St Paul, MN, USA), Heliomolor (Ivoclar Vivadent, Schaon, Liechtenstein) containing different filler particle types and morphologies were investigated. The compressive strength, compressive modulus, flexural modulus and flexural strength of these …
Published in Journal of Materials & Metallurgical Engineering · Vol. 2, Issue 1-3, 2012 · pp. 22–29 Read article
-
Poisson’s Ratio in Stone Dust and Steel Fiber Reinforced Composite Concrete: A Theoretical Approach
Abstract: Poisson's ratio characterizes a material's deformation under load, offering insights into its structural behavior. Yet, there's a lack of research on SDSFC's Poisson's ratio, hindering its widespread adoption. This study aims to fill this gap by investigating SDSFC's Poisson's ratio under various curing conditions and material compositions. By analyzing how curing methods and material components influence Poisson's ratio, we can better comprehend SDSFC's behavior under different circumstances. Additionally, we'll explore …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 88–94 Read article
-
Effect of RHA on Strength of M20 Concrete Under Both Acidic and Non-Acidic Medium by Using Rebound Hammer Test
Abstract: Commonly, Portland cement is the most common type of cement in general use around the world as a basic ingredient of concrete which release large amount of carbon dioxide while manufacturing. Consequently there is important to utilize choice to limit the effect on climate. In this paper Rice husk debris were to some degree traded for concrete material. In this investigation ice husk debris are utilized as a swap for …
Published in Journal of Construction Engineering, Technology & Management · Vol. 11, Issue 3, 2021 · pp. 1–6 Read article
-
Numerical Investigation on Medium Velocity Impact Response of Hybrid Metal Matrix Composite Laminate
Abstract: The current investigation centers on examining the numerical analysis of a hybrid metal matrix composite laminate resulting from impacts inflicted by diverse projectiles on the composite structure. Composite materials are chosen based on their inherent properties and compatibility in terms of bonding with other materials, forming the layers for the hybrid metal matrix composite. The fiber taken for the research paper was Kevlar and Sisal because they both bear good …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 346–358 Read article
-
Mechanical Characteristic Analysis of Five-Layer Carbon-Carbon Composite Material
Abstract: The current study investigates the fabrication and mechanical strength of five-layer carbon-carbon composite. The strong five-layer carbon-carbon composite material with high strength and modulus is made of a raw material called precursors. The polyacrylonitrile (PAN) method is used in the fabrication of carbon fiber. The characteristics of the resulting carbon material depend on the composition and structure of the precursor. A sheet of 50 x 40 cm five-layer carbon-carbon composite …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 405–417 Read article
-
High Strength Concrete Using Stone Waste
Abstract: Concrete is still the main material used in modern construction, and high strength concrete (HSC) is especially important for structures that need to be very strong. With more focus on being environmentally friendly, using waste materials from industries like stone in concrete has become a good way to make construction more eco-friendly. However, getting rid of stone waste, such as granite slurry, marble powder, and quarry dust, causes environmental problems …
Published in Recent Trends in Civil Engineering & Technology · Vol. 16, Issue 1, 2026 · pp. 8–15 Read article
-
Experimental Study on Waste Fibers in Concrete
Abstract: The rising expense of building, along with the progressive impact on the environment, has driven experts to adopt natural fibers such as coir and bamboo fibers and synthetic fibers such as plastic fibers for boosting concrete strength. Fibers are readily available at the test location, making them comparatively suitable as a reinforcing material in concrete. Concrete with fibers was compared to conventional concrete, and different strength parameters such as bending, …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 190–201 Read article
-
Formation and Fabrication of A 3D- Printed Polymer Propeller for Improved Propulsion and Minimal Acoustic Emission: A Comparative Study for Small Unmanned Vehicles
Abstract: The current research focuses on a comparative analysis of propeller designs to identify an option that enhances thrust efficiency while minimizing acoustic noise. The study evaluates three distinct types of propellers: the traditional three-blade propeller, the Sharrow propeller, and a novel aero propeller featuring an air foil-shaped cross-section. To facilitate a hands-on analysis, these propellers were produced using 3D printing technology, specifically employing ABS filament through a Fused Deposition Modelling …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 252–261 Read article
-
Effect of Red Mud Loading on the Thermal and Mechanical Performance of Polypropylene Composites
Abstract: Waste red mud (RM) serves as a low-cost and sustainable filler material in a polypropylene (PP) matrix. This study investigate the effects of different red mud contents on the dynamic mechanical and thermal properties of polypropylene-red mud (RM-PP) composites where red mud levels range from 0% to 40% (based on weight percentage). Fourier Transform Infrared Spectroscopy (FTIR) was conducted for verifying the presence of both polypropylene and red mud in …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 161–169 Read article
-
Production of Alum from Aluminium Drink Cans Waste for Water Treatment
Abstract: The graphite furnaces atomic absorption spectrophotometry (GFAAS) technique has been previously used to quantify the aluminium (Al) content in soft drinks made from aluminium cans over the course of a 12-month storage period. The current research aimed to determine the efficacy of alum obtained from waste soft drink cans compared to the alum obtained from local markets in treating water from Shatt al-Arab, Basrah, Khorramshahr, and Abadan, Iraq. The Shatt …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 102–109 Read article
-
Additive Manufacturing in Aerospace and Defense Industries: A Review
Abstract: Additive Manufacturing (AM) is a promising fabrication technique that can offer significant benefits to aerospace industries and Defense Support Service providers. Because of its potential to delocalize production near the point of use and its transformative potential, the technology is gaining popularity. In fact AM has a great potential to revolutionise the Global manufacturing and distribution system by offering low cost and highly customized parts. AM encompasses a broad variety …
Published in Journal of Production Research & Management · Vol. 11, Issue 1, 2021 · pp. 16–36 Read article
-
Thermal Degradation Kinetics and Activation Energy of Recycled High-Density Polyethylene/Fly Ash Composites at Varying Filler Loadings
Abstract: The ever-increasing plastic waste and coal fly ash are a serious environmental problem, which have to be addressed with effective recycling methods that transform plastic waste and coal fly ash into high value-added composites of good thermal properties. Although the use of recycled high-density polyethylene (HDPE) is an area of interest, the effect of fly ash reinforcement on thermal degradation kinetics and activation energy is still poorly characterized, and a …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Investigation into mechanical Characterstics of laminated composite materials (PMMA and NYLON) using FDM
Abstract: The widespread embrace of 3D printing technology stems from its capacity to minimize material waste, offer versatile design options, and enable the production of intricate structures. 3D printed polymer composites reinforced with fibers (carbon, glass, nylon etc.) have been extensively used in automobile, marine, aerospace and energetic applications due to their excellent properties. Nylon fiber is light weight, resistance to damage from oil and chemicals, tough, strong and has higher …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 108–121 Read article
-
EXPERIMENTAL ANALYSIS OF STEELS ON HARDNESS IN ELECTRICAL DISCHARGE MACHINING
Abstract: Electrical Discharge Machining (EDM) is one of the most extensively used non-conventional machining processes. It uses thermal energy to machine all electrically conductive materials of any toughness and hardness for manufacturing of dies, aerospace parts. Since there is no direct contact between workpiece and tool electrode in EDM. Work material hardness is not a hurdle in machining by EDM, which is principally useful for machining of die profiles/ contours.This paper …
Published in Journal of Experimental & Applied Mechanics · Vol. 9, Issue 2, 2018 · pp. 1–5 Read article
-
Thermal Stress Analysis of Neck Tube into Vertical Cryogenic Insulated Cylinders using ANSYS Software: A Review
Abstract: Materials have a significant impact on the progress of one discipline, cryogenics. Technologies based on cryogenics are used in many different fields, including metallurgy, chemistry, the electricity sector, medicine, rocket propulsion, space simulation, food processing via refrigeration, and many more. The current status of research and anticipated advancements in the field of cryogenic materials throughout the coming century cover a wide range of topics. We quickly review the background of …
Published in Journal of Thermal Engineering and Applications · Vol. 10, Issue 1, 2023 · pp. 26–30 Read article
-
Polymer Encapsulants for Photovoltaic Modules: Electrical Insulation Performance and Long-Term Durability under Accelerated UV Exposure
Abstract: Influence on the reliability and service life of PV modules is a major issue, which is influenced by the encapsulant degradation in long-term exposure to the sun's ultraviolet (UV) radiation. A systematic accelerated UV aging study of Ethylene Vinyl Acetate (EVA), Polyolefin Elastomer (POE), and Polyvinyl Butyral (PVB) films under IEC 61215-2:2021 specified test chamber conditions of Q-UV is conducted. The material properties were tested at various exposure intervals including …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 384–408 Read article
-
Different Aspects and Processes in 3D Printing: An Overview
Abstract: 3D Printing or Additive manufacturing produces actual items from geometric representations by layering on materials one after the other. 3D printing is a rapidly developing technology. These days, 3D printing is employed all over the world. The application of 3D printing technology is expanding in the fields of agricultural, healthcare, automotive, locomotive, and aviation. It is utilized for mass modification and fabrication of various open-source designs. An object can be …
Published in International Journal of Manufacturing and Production Engineering · Vol. 2, Issue 1, 2024 · pp. 24–30 Read article
-
Water Chestnut Stem-Derived Biochar Supported AgNPs/AC-CTS-PVA Composite Gel for Wastewater Treatment and Potent Antibacterial Performance
Abstract: In the present study, green and efficient Ag-NPs functionalized activated carbon/chitosan-polyvinyl alcohol (AgNPs/AC-CTS-PVA) composite gel was successfully synthesized using water chestnut stem-derived biochar for wastewater treatment and antibacterial applications. The composite was characterized by FTIR, XRD, SEM-EDX, and TGA analyses, confirming the successful incorporation of crystalline Ag nanoparticles within the polymeric matrix and improved thermal stability. The material was tested regarding the removal of the dye of methylene blue (MB) …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1129–1144 Read article
-
Phase Transformation of Manganese Steel: A Role of Alloying Elements
Abstract: Low alloyed steels that are both strong and ductile are the primary focus of new material concept work due to economic considerations. One key to making good use of these materials is applying the right heat and thermo mechanical treatments. Phase transitions can be influenced by using different alloying procedures. Microstructural evolution and mechanical characteristics were investigated in relation to varying manganese, silicon, and chromium levels. Developing high-strength flat rolled …
Published in Trends in Mechanical Engineering & Technology · Vol. 14, Issue 2, 2024 · pp. 15–20 Read article