Search
272 articles for “scanning electron microscopic”
-
Evaluating Fiber Volume Fraction and Defects in Fiber Reinforced Polymer Composites for T Joint applications
Abstract: Fiber-reinforced polymer (FRP) composites have been integral to industries such as aviation, aerospace, shipbuilding, and automotive due to their strength, durability, lightweight, and corrosion resistance. This study examines the production and microstructural analysis of polymer composites using FRP and manual lamination methods. While manual lamination is quick and economical, it relies on operator skill, resulting in low mechanical properties. Microstructure analysis via 3D optical and scanning electron microscopes revealed that …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1222–1235 Read article
-
Comparative Adsorption Studies on Raw Rice Husk, Acid Leached Rice Husk and Base Leached Rice Husk by Using Methylene Blue as Dye
Abstract: Current methods for removing dyes from wastewaters are costly and cannot effectively be used to treat wide range of such wastewaters. This work describes the use of raw rice husk (RRH), acid-leached rice husk (ALRH) and base-leached rice husk (BLRH) as adsorbents for decolorization. Characterization of raw rice was done by powder X-ray diffraction (P-XRD) analysis, surface area analysis and scanning electron microscopy. Raw rice husk was collected directly from …
Published in Journal of Catalyst & Catalysis · Vol. 2, Issue 1, 2015 · pp. 32–39 Read article
-
Multifarious Magnitude of Magnesium Oxide Nanoparticles Integrated Feed on Growth and Hematological Characteristics of Mrigal Cirrhinus mrigala
Abstract: The present study deals with the multifarious magnitude of magnesium oxide nanoparticles integrated feed on growth and hematological characteristics of Mrigal Cirrhinus mrigala. Magnesium oxide nanoparticles were made using the co-precipitation process and analyzed, identified, and characterized utilizing scanning electron microscopy, energy dispersive x-ray spectroscopy, x-ray diffraction, and Fourier transform infrared spectroscopy. Four feeds such as Feed I (Control), II, III, and IV were prepared by using multifarious magnitude (25, …
Published in Research and Reviews: A Journal of Toxicology · Vol. 13, Issue 1, 2023 · pp. 1–9 Read article
-
An Assessment of Interfacial Chemistry and Character of Fiber/Polymer Microcomposites
Abstract: AbstractThe interfacial chemistry and character of hygrothermally treated E-glass/epoxy microcomposite have been investigated by Fourier transform infrared spectroscope (FTIR-imaging), temperature-modulated differential scanning calorimeter (TMDSC) and scanning electron microscope (SEM) techniques. The physico-chemical interactions occurring between absorbed water molecules and the network of a tetrafunctional epoxy resin were studied by FTIR-imaging. This is used to study the mechanistic details of epoxy curing on the molecular level. Absorbance peaks of OH stretching …
Published in Journal of Polymer & Composites · Vol. 1, Issue 1, 2013 · pp. 1–5 Read article
-
Biosynthesis of Zinc Oxide Nanoparticles and Their Revolutionary Impacts on Agroindustry: Review
Abstract: Nanotechnology is a new approach of science which provides alternative tool in many fields including agriculture. This comprehensive review focuses on the biosynthesis and characterization of zinc oxide nanoparticles (ZnO NPs), highlighting their vast potential in agroindustry applications. Unlike traditional physical and chemical methods, which are often costly, time-consuming, and involve hazardous materials, this review explores the promising biological synthesis routes, offering a more sustainable and eco-friendly alternative for producing …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 26, Issue 2, 2024 · pp. 33–50 Read article
-
A Brief Review on Interfaces of Copper Welded to Different Materials
Abstract: In engineering applications, three metals with high conductivity are primarily used such as copper (Cu), aluminium (Al), and silver (Ag). Each has its unique set of properties that affect specific engineering applications. Infact the choice of conductor depends on a mixture of cost, technical parameters, and environmental conditions. Among these, Copper is widely valued in engineering applications due to its antimicrobial property, excellent electrical (about 100% IACS) and thermal conductivity, …
Published in Trends in Mechanical Engineering & Technology · Vol. 16, Issue 1, 2026 · pp. 23–36 Read article
-
A Review on Synthesis and Characterisation of Nanoclusters
Abstract: Nanoclusters are materials with size less than 2 nm. Because of their small size and high surface area, they have properties which can be used for various applications like bio-sensing, catalysis, fuel cells etc. The synthesis techniques are carried out in such a way that the size-selection of nanoclusters take place. The synthesis methods discussed in this review include both top-down and bottom-up techniques. The different characterization techniques taken into …
Published in Emerging Trends in Chemical Engineering · Vol. 8, Issue 1, 2021 · pp. 1–19 Read article
-
Amorphous composite coating’s ability to resist corrosion
Abstract: To increase the mechanical qualities of the coatings, amorphous composite coating was applied to the carbon steel substrate using arc spraying and remelted using a plasma remelting technology. Micro structural microscope, scanning electron microscope, energy dispersive spectroscopy, X-ray diffraction, and microhardness tester were used to examine the composition, microstructure, and characteristics of the composite coating. After the plasma remelting, the microstructure of the composite coatings for amorphous materials was more …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 9, Issue 2, 2022 · pp. 12–16 Read article
-
A Hybrid model of ResNet50 integrated U-Net for image Denoising for Polymer and Composite Microstructure Analysis
Abstract: In digital era a high-quality imaging plays a very important role in polymer and composite material characterization features such as fiber-matrix interfaces, voids, microcracks cause problems in mechanical and functional properties. Polymer imaging includes optical microscopy and scanning electron microscopy, due to sensor limitation, environmental conditions add noise to the image and reduce quality of image. The noise degrades image quality, and it leads to reduce reliability in material analysis. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 592–602 Read article
-
Polymer-Inspired Underwater Friction Stir Welding of Aluminum–Copper Composite Joints
Abstract: The problem of high-performance dissimilar joints and their compatibility with polymer and composite engineering applications is the impetus to the current work. This paper seeks to investigate the possibility of applying the polymer-based composite ideas with underwater friction stir welding (UWFSW) to improve the performance of AA5083 aluminumcopper joints. To achieve this a systematic experimental method was followed by varying the tool rotational speed, traverse speed and tilt angle and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 372–383 Read article
-
Mechanical Characterization and Machinability Optimization of Stir-Cast Al6061–SiC Metal Matrix Composites
Abstract: This study presents the fabrication, mechanical characterization, metallurgical analysis, and machinability optimization of Aluminum 6061 reinforced with Silicon Carbide (SiC) metal matrix composites (MMCs) at three weight fractions: 5%, 7.5%, and 10%. Composites were manufactured using the stir casting technique, followed by comprehensive mechanical testing (tensile, hardness, and impact), optical microscopy, and scanning electron microscopy (SEM). Machinability was assessed through turning experiments on a lathe using an L9 Taguchi orthogonal …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 833–848 Read article
-
Effect of Process Parameters on TIG Weld-Brazing of Aluminum Alloy to Galvanized Steel
Abstract: AbstractAbility to join aluminum alloy to steel enables weight reduction of automobile bodies. Gas tungsten arc welding (GTAW) process was employed to weld-braze A8011-H14 aluminum alloy to galvanized steel in lap configuration. The influence of heat input on bead formation and joint strength was investigated. The microstructural characterization was carried out using an optical microscope and scanning electron microscope. The chemical composition was analyzed using energy dispersive spectroscopy technique. The …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 5, Issue 3, 2018 · pp. 8–14 Read article
-
Synthesis, Characterization and Deformation Studies of Blast Furnace Slag Particles Reinforced Aa2024 Composite
Abstract: The main objective is to explore the use of blast furnace slag as a reinforcing material. This work provides results of aluminum metal matrix composites reinforced with granulated slag (GS). The Composite is prepared by taking AA 2024 and GS with stir casting process. Optical microscope and scanning electron microscopy were employed to track the reactions between the aluminum matrix and the granulated slag during the sintering treatment. The hardness …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 3, Issue 3, 2016 · pp. 31–43 Read article
-
Crystallization Kinetics and Morphological Shifts in Polylactic Acid/Nanocellulose Blends Under Isothermal Melt Conditions
Abstract: The great potential of polylactic acid as a sustainable biopolymer for packaging, biomedical materials, and additive manufacturing, polylactic acid's slow crystallization kinetics during melt processing causes it to be poorly crystallized, thermally weak, and mechanically underperforming. Crystallization models of PLA/nanocellulose blends have been limited to isothermal melt crystallization kinetics and the resulting morphological changes. The phenomena discussed in this work are systematically explored by melt compounding of polylactic acid with …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Preparing Chitosan Hybrid Nanocomposites by Novel Additives for Wound Healing
Abstract: Biomaterials made from chitosan have been discovered to be particularly unique marine polysaccharides (or polycarbohydrates) with a wide range of physico-chemical and biological characteristics suitable for biomedicine field. Due to net positive charge of chitosan, it is essentially capable of chemically binding with negatively charged surfaces A biodegradable blend of chitosan nanoparticles (CHT), poly vinyl alcohol (PVA) and polyethylene glycol (PEG) hybridized with metal oxides nanopowders were prepared and used …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 9–23 Read article
-
Solid Lipid Nanoparticles in Medicine: Formulation, Characterization and Future prospects
Abstract: An alternative to conventional colloidal carriers such liposomes, polymeric nanoparticles, and emulsions, solid lipid nanoparticles (SLNs) were created in the early 1990s. Benefits include targeted medicine distribution, controlled drug release, and improved stability. An extensive review of the excipients utilized, the production techniques, including the membrane contractor approach, and the possible advantages and disadvantages of SLNs is given in this work. It investigates secondary stabilization techniques like freeze-drying and spray-drying, …
Published in International Journal of Membranes · Vol. 2, Issue 1, 2025 · pp. 1–15 Read article
-
Fabrication and Characterization of Almond Skin Powder Reinforced PLA Based Composite Filaments for Fused Filament Fabrication
Abstract: Researchers around the globe are increasingly utilizing recycling methods to address waste generated from polymers, spurred by the dire need to deal with environmental challenges promoting sustainable practices. Polymers are having highly-stable long-chain polymer structure which makes it difficult to degrade easily posing many environmental and health challenges, hence, recycling of the polymers is the sole method to mitigate harmful effects. However, there has been relatively little focus on producing …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 530–539 Read article
-
Synthesis and Ion Transport Studies of a New Potassium Ion-Conducting Nanocomposite Polymer Electrolyte
Abstract: The pursuit of safe, efficient, and sustainable energy storage solutions has intensified research on nanocomposite polymer electrolytes, especially for next-generation battery technologies. This work reports the synthesis and ion transport characteristics of potassium ion-conducting nanocomposite polymer electrolytes (NCPEs), emphasizing their structural, electrical, and electrochemical performance. To enhance ionic conductivity and mechanical strength, polymer matrices were reinforced with nanoscale ceramic fillers. A new potassium ion-conducting NCPEs: (1-x)[70PEO:30KCl] + x SiO₂ (where …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1496–1504 Read article
-
A Comprehensive Survey of Polymer Detection Techniques and Computer-Based Analysis Methods for Advanced Material Characterization
Abstract: Polymers are widely used in aerospace, automotive, biomedical, packaging, electronics, and manufacturing industries because of their lightweight nature, durability, and versatility. Accurate polymer identification and characterization are essential for quality control, recycling, performance assessment, and the development of advanced materials. Characterization helps determine important properties such as chemical composition, molecular structure, thermal stability, mechanical strength, and surface morphology, which influence material performance and application suitability. Traditional polymer detection methods include …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 921–929 Read article
-
Influences of Surface Modification of Vetiver Fiber Reinforced Polypropylene Composites
Abstract: Plant-drive vetiver fiber (VF), a significant lignocellulosic fiber, can be included in polymers like polypropylene (PP) in dissimilar ways for attaining preferred features and structure. But its high levels of moisture absorption, poor wettability and inadequate adherence between the fiber and polymer matrix result in debonding with age. To develop the overhead attributes,adequate surface modifications are essential. In our current work, the VF surface was modified by mercerized treatment (MVF), …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 10, Issue 2, 2023 · pp. 30–44 Read article