Search
35 articles for “reinforced cement concrete”
-
Sustainable High-Strength Geopolymer Composite Reinforced with Nano-Silica and Basalt Fibers: Mechanical and Microstructural Evaluation
Abstract: Sustainable soil composites (SSC) were formulated by incorporating red earth with varying proportions of bagasse ash (BA) and hydrated lime to enhance geotechnical performance and promote the reuse of agro-industrial waste. Red earth served as the primary structural matrix, BA functioned as a pozzolanic filler, and lime acted as a chemical stabilizer. BA content ranged from 0% to 60%, identifying 10% as the optimum level for significant improvement, and lime …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1113–1122 Read article
-
Service Life Prediction of Concretes Incorporated with Ground Granulated Blast Furnace Slag and Icrete with respect to Chloride Ion Penetration
Abstract: The reduced service life of concrete structures in coastal or de-icing salt conditions is commonly attributed to corrosion generated by chloride. Therefore, extensive research is being conducted to estimate the time taken for threshold chloride ions to reach the reinforcement and break the protective layer, initiating the corrosive process. This study conducted an experimental investigation on controlled concrete, concrete incorporating 50% GGBS, and concrete incorporating both 50% GGBS and 2% …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 214–226 Read article
-
Experimental Study on the Strength Enhancement of Carbon Fiber Reinforced GGBS Concrete
Abstract: This study provides an in-depth analysis of the experimental investigation conducted on carbon fiber reinforced GGBS concrete (CFRGC). The primary objective of the research was to evaluate the effects of carbon fibers on various mechanical properties of concrete, with a particular focus on strength parameters. In this study, the carbon fiber content was systematically varied from 0.5% to 1.5% by weight of cement, in increments of 0.5%, to determine the …
Published in Journal of Structural Engineering and Management · Vol. 11, Issue 3, 2024 · pp. 36–50 Read article
-
Investigating Flexural Behavior in Cyclic Loading of Fly Ash-Based Green Concrete
Abstract: The construction industry is increasingly embracing sustainable materials, and geopolymer concrete (GPC) has emerged as a promising eco-friendly alternative to Ordinary Portland Cement (OPC). Derived from industrial by-products such as fly ash, GPC offers significant environmental advantages by reducing greenhouse gas emissions associated with conventional cement production. This study explores the monotonic and cyclic performance of fly ash-based GPC, with a focus on its mechanical and structural behavior. Key properties, …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 1, 2025 · pp. 1–5 Read article
-
A Study On Improving The Performance Of Concrete Using Coconut Fibers
Abstract: The aim of this study is to explore the incorporation of coconut fiber into M30 grade concrete and assess its impact on the strength characteristics. A literature review of different fibers is conducted and highlighting the working parameters. This research focuses to explore the efficacy of employing coconut fibers as micro reinforcement in concrete. The investigated properties encompass the compressive strength of the coconut fibers reinforced concrete (CFRC) at different …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 15, Issue 2, 2024 · pp. 26–36 Read article
-
Analytical exploration of self-consolidating concrete (SCC) mix proportions via the Taguchi method
Abstract: To address the challenge of limited space within structural elements containing densely packed reinforcement, Self-Compacting Concrete (SCC) was developed. This study focuses on optimizing the experimentation process using Design of Experiments (DoE). Taguchi's standard L(3) orthogonal array (OA) was utilized, consisting of four factors with three levels each, resulting in nine trial mixes. The factors examined include water-powder ratio, cementitious material content, superplasticizer dosage, and steel fiber content. The aim …
Published in Journal of Geotechnical Engineering · Vol. 11, Issue 1, 2024 · pp. 1–16 Read article
-
Recent Progress in Near-Surface Mounted Fiber-Reinforced Polymer Strengthening Systems: Composite Materials, Adhesive Technologies, and Interfacial Bonding
Abstract: Fiber-reinforced polymer (FRP) composites have emerged as one of the most promising classes of advanced engineering materials for structural strengthening and rehabilitation owing to their high specific strength, excellent corrosion resistance, fatigue durability, and design flexibility. Among various strengthening approaches, near-surface mounted (NSM) systems have gained significant attention because they provide enhanced bond performance, improved protection against environmental exposure, and superior utilization of FRP reinforcement compared with conventional externally bonded …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Service Life Prediction of Concretes Incorporated with Fly Ash and Alccofine with respect to Chloride Ion Penetration
Abstract: Chloride-induced corrosion poses a significant threat to the degradation of reinforced concrete structures, especially in extreme environments such as marine and industrial exposure conditions, where the damage can be particularly severe. This study provides an experimental investigation utilizing three distinct water-binder ratios (0.3, 0.4, and 0.5) applied to three types of concrete mixtures: conventional concrete, concrete blended with 40% fly ash, and concrete blended with 40% fly ash and 2% …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 202–213 Read article
-
Degradation of Building Materials by Corrosive Pollutants
Abstract: Fiber reinforced polymers (FRP) is used for the corrosion suppression of reinforced concrete structures (RCS). One of the main issues with reinforced concrete constructions is corrosion. It interacts with acids, alkalis and salts to produce disintegration in building materials components. Pollutants and effluents speed up disbanding inside and outside reinforced structures. Bio-wastes come in contact of building materials to develop miro and macro-organism and these organisms release acid substances to …
Published in International Journal of Minerals · Vol. 2, Issue 1, 2025 · pp. 15–24 Read article
-
Experimental Study on Fresh and Mechanical Properties of Crimpled Steel Fibers in Self-compacting Concrete
Abstract: The flow and strength characteristics of fiber-reinforced self-compacting concrete (SCC) with different aspect (l/d) ratios of fibers are recommended to be studied. After achieving a satisfactory SCC mix, crimped steel fibers with l/d ratio 30 are designated as CSF30; with l/d ratio 40 are designated as CSF40, with l/d ratio 50 is designated as CSF50 and with l/d ratio 62.5 is designated as CSF62.5 fibers are added at a fixed …
Published in Journal of Polymer & Composites · Vol. 11, Issue 1, 2023 · pp. 65–75 Read article
-
Flexural Analysis of Concrete Specimens with Substantial Substitution of Cement by Marble Dust and Scrap Rubber as Fibre
Abstract: Concrete is a crucial material in building and construction. Concrete is becoming more and more in demand every day. Concrete's essential ingredients are running out, therefore we need to find replacements. In addition to providing the necessary strength to the concrete, the replacement materials should also have the properties of the genuine components used in concrete. Typically, compression is where concrete shines, whereas tension and shear are where it falters. …
Published in Journal of Polymer & Composites · Vol. 11, Issue 4, 2023 · pp. 95–100 Read article
-
Experimental Study on Waste Fibers in Concrete
Abstract: The rising expense of building, along with the progressive impact on the environment, has driven experts to adopt natural fibers such as coir and bamboo fibers and synthetic fibers such as plastic fibers for boosting concrete strength. Fibers are readily available at the test location, making them comparatively suitable as a reinforcing material in concrete. Concrete with fibers was compared to conventional concrete, and different strength parameters such as bending, …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 190–201 Read article
-
Study the Impact of Corrosive Pollutants on Building Materials Corrosion
Abstract: Reinforced concrete structures (RCS) may be made more resistant to corrosion by using fiber reinforced polymers (FRP). One of the primary concerns with reinforced concrete constructions is corrosion. It causes disintegration in building material components by interactions with salts, acids, and alkalis. Both within and outside of reinforced properties, pollutants and effluents accelerate disbanding. When bio-waste and building materials come into contact, microorganisms and macro organisms, grow and emit acid …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 2, Issue 2, 2024 · pp. 20–29 Read article
-
Sustainability and Mechanical Performance Evaluation of Cementitious Composites Reinforced with Waste Rubber Aggregates and Ground Granulated Blast Furnace Slag
Abstract: The development of environmentally responsible composite materials has gained global momentum with the shift toward circular and sustainable construction practices. In this work, the performance of cementitious composites that partially substitute natural fine and coarse aggregates with recycled rubber aggregates from end-of-life tires and Ground Granulated Blast Furnace Slag (GGBS) as an additional cementitious material is examined. A total of thirty composite mixes were formulated by varying GGBS (10–30%) and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1164–1180 Read article
-
Comparative Review of Innovations in Self-Compacting Concrete (SCC) Technologies
Abstract: Self-compacting concrete (SCC) is a revolutionary material in contemporary construction, with better workability and lower labor requirements without any sacrifice in strength or durability. The latest advances have been in terms of furthering its environmental and performance attributes by using different materials and methods. One of them is substituting ordinary Portland cement with high-volume fly ash and calcined calcium carbonate (BCC), cutting CO₂ emissions by as much as possible while …
Published in Journal of Construction Engineering, Technology & Management · Vol. 15, Issue 3, 2025 · pp. 99–103 Read article