Search
43 articles for “metal melt”
-
Optimizing Parameters for Dry Sliding Wear Control in Stir-Cast AA7050/SiC Composites
Abstract: Using a pin-on-disc tribometer, this study examined the dry sliding wear behavior of AA7050/SiC composites. The production of this metal matrix composite was achieved through the stir-casting process, which involved an initial step of melting the AA7050 alloy, followed by the careful introduction of silicon carbide (SiC) particles, stirring to achieve uniform dispersion, and finally, casting the molten mixture. Wear rate (WR) was determined by three operational parameters: SiC reinforcement …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1624–1635 Read article
-
Impact of Mould Material on Microstructure and Mechanical Properties of Aluminium Castings: A Comparative Study with Aluminium Matrix Composites
Abstract: Casting has a wide industrial usage because it allows manufacturing complicated forms even at a comparatively low cost. Issues like transfer of heat through the interface of the mould and the metals, the rate of solidification, and the characteristics of the mould material have a powerful impact on the quality of cast products. This study measures the influence of various mould substances on the mechanical characteristics of aluminium castings. Sand, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 9–18 Read article
-
Electrodeposition and Magnetron Sputtering of Rhenium Coatings on Carbon-Carbon Composites for Enhanced Corrosion Resistance and Structural Integrity
Abstract: It is well known that tailored materials are gaining in-roads to aviation and other manufacturing industries where stringent requirements are to be met, due to high temperature erosion, which is a problem. In order to counter these issues, materials which can resist a very high temperature are to be sought. One of the several methods to combat this high temperature issue is to provide a metallic refractory material coating on …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 35–44 Read article
-
Optimization of Process Parameters of an Induction Furnace for Aluminium 6061 using Robust Design Approach
Abstract: Electric induction furnaces are extensively used in the foundry industries for the preparation of alloys and metal castings. The induction furnace works on the principal of electromagnetic induction. Some of the applications of induction heating include heat treatment, melting, surface treatment and in food industry. The detailed study about the working of an induction furnace was done. The induction furnace procured by mechanical department of our college is made by …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 4, Issue 1, 2017 · pp. 6–12 Read article
-
Metal Foam by Powder Metallurgy Routes: A Review Paper
Abstract: The aim of study is to evaluate and optimize the process parameters and several control factors of foaming because of their physical and mechanical properties such as, high stiffness, high compressive strength, and good energy absorption. Powder metallurgy is a method in which aluminum and aluminum alloy are mixed with TiH2 or other blowing agents for foam making process. Powder mixed is consolidated to obtain a high dense foam compact …
Published in Journal of Production Research & Management · Vol. 6, Issue 1, 2016 · pp. 9–15 Read article
-
Polymer Nanocomposites at the Nanoscale: A Comprehensive Review with Reference to Indian Regulations
Abstract: By combining nanoscale reinforcements with polymer matrices, polymer nanocomposites have become one of the most promising classes of advanced materials with superior mechanical, thermal, electrical, barrier and multifunctional properties. This extensive review critically analyses the scientific advances made in polymer nanocomposites between 2000 and 2026, with focus on recent advances in polymer nanocomposite development, processing techniques, structure–property relationships and new applications. The review covers the impact of the nanofillers which …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 · pp. 115–129 Read article
-
Nano Shield-EV: Graphene and CNT-Infused Polymer Composites for Advanced EMI Shielding in Electric Vehicles
Abstract: The rapid growth of electric vehicles (EVs) has intensified the need for lightweight, thermally stable, and mechanically robust electromagnetic interference (EMI) shielding materials to ensure the reliable performance of advanced electronic systems. Traditional metallic shields, though highly effective, increase vehicle weight and restrict design flexibility, thereby motivating the search for multifunctional polymer-based alternatives. In this study, NanoShield-EV introduces novel polymer nanocomposites fabricated via melt blending and compression molding, combining engineering-grade …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1036–1047 Read article
-
Plunger Technique: A New Approach to Stir Casting AMMC Preparation
Abstract: Metal matrix composites (MMCs) are materials that are highly attractive for large range of hi-tech engineering applications. Keeping this in mind, materials for the present investigation were prepared by a drastically modified stir-casting technique where the usual solid shaft stirrer was replaced by a hollow/tubular spindle-stirring mechanism through which silicon carbide particulates in small cylindrical capsule were introduced to the aluminum-magnesium alloy matrix with the help of a plunger rod …
Published in Journal of Materials & Metallurgical Engineering · Vol. 3, Issue 2, 2013 · pp. 26–32 Read article
-
Short Circuit MAG/MIG Welding and Fast ROOT Modified Short arc Welding Process for Sheet Metals Welding with Diverse Air Gap
Abstract: The outcome of an analysis allocating with welding of sheet metals with diverse air gap using short circuit MAG welding process and Fast ROOT custom-made short arc welding methods have been presented. Welding turns were made below different conditions and through each run; the diverse process parameters were incessantly observed. It was found that fewer HAZ and maximum welding speed are reached under an exact welding condition with quick ROOT …
Published in Journal of Materials & Metallurgical Engineering · Vol. 6, Issue 1, 2016 · pp. 47–59 Read article
-
Levels of Environmental Pollutants and Urinary 1-Hydroxypyrene among Foundry Workers
Abstract: Environmental and biological monitoring was conducted to measure the Total Suspended Particulate Matter (TSPM), SO2,NOx and 1-OHP among foundry workers. Among the various sampling locations melting (2466 μg/m3) and fettling (2951 μg/m3) recorded higher concentration of TSPM. The concentration of NOx and SO2 ranged between 288– 352 μg/m3 and 3.11-10.97μg/m3,respectively. Among the various heavy metals analysed, the concentration of zinc and nickel was the maximum. Although the environmental monitoring study …
Published in Research and Reviews: A Journal of Toxicology · Vol. 4, Issue 1, 2014 · pp. 8–15 Read article
-
Polymer-Based Nanocomposites: Synthesis, Properties, and Applications
Abstract: Polymer-based nanocomposites have emerged as a highly promising class of materials, offering enhanced mechanical, thermal, and electrical properties. By incorporating nanoscale fillers such as carbon nanotubes, graphene, and metal oxides into polymer matrices, these composites exhibit superior strength, conductivity, and durability compared to conventional polymer materials. Their tunable properties make them highly versatile, with applications spanning multiple industries, including biomedical engineering, electronics, and automotive manufacturing. The synthesis of polymer nanocomposites …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 222–227 Read article
-
Synthesis, Characterization of New Imidazolidin-4-One Containing Azo Compound Derived from Acetylacetone as Antibacterial and Antioxidant Agents
Abstract: In the present study, new derivatives of imidazolidine-4-one was prepared. Which involved reactions to diazonium salt of o-methoxy aniline with acetylacetone in the presence of sodium hydroxide, and isolating the azo compound as a brown precipitate. The azo diketone reacts efficiently with aromatic amine derivatives to produce Schiff bases as a light yellow and dark brown precipitates, and from this Schiff bases three derivatives of imidazolidine-4-one was prepared by reacting …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 17, Issue 1, 2026 · pp. 94–114 Read article
-
A Review on Study of Casting Defect in Automobile Component
Abstract: Casting process is the most widely used process in manufacturing industries especially in automotive products. Production of casting involves various processes like pattern making, molding, core making and melting. It is very difficult to produce defect free castings. In developing country, foundry industries suffer from poor quality and productivity due to involvement of number of process parameters in casting process, which challenges explanation about the cause of casting defects. The …
Published in Journal of Production Research & Management · Vol. 8, Issue 2, 2018 · pp. 8–13 Read article
-
Hot Corrosion Behaviour of Sol-Gel Alumina Coated IN625 Alloy in Alkali Metal Chlorides and Sulphates Salt Deposit Systems
Abstract: Sol-gel derived alumina coating was applied on Inconel 625 alloy using dip coating technique and their hot corrosion studies were carried out in LiCl-NaCl and Na2SO4-K2SO4 salt deposits system at 650 °C and 850 °C respectively. Oxidation kinetics measurement indicated the occurrence of an order of magnitude lower oxidation rate and around 15–20 % higher activation energy for the coated substrate as compared to uncoated one. EDS analysis of the …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 3, Issue 1, 2016 · pp. 9–16 Read article
-
Wear Behavior of Al-Alloy (Al-5 Mg) in-situ Reinforced TiB2 Particulate
Abstract: A research has been carried out for replacing Al monolithic alloys by aluminium (Al) based metal matrix composites (MMCs) in many engineering applications where high wear resistance and stiffness are required. In this paper, the investigated dry sliding wear behavior of TiB2 particulate reinforced composite of Al-Alloy (Al-5 Mg) is discussed. The in-situ Al-Alloy (Al-5 Mg) 10wt% TiB2 composite material were prepared by molten flux reaction synthesis using electric melting …
Published in Journal of Materials & Metallurgical Engineering · Vol. 4, Issue 3, 2014 · pp. 32–37 Read article
-
Demonstrative Research of Group VII Elements of the Periodic Table: Characteristics and Properties of Chemical Behavior
Abstract: The elements in Group VII, commonly referred to as halogens, are non-metals that exhibit similar chemical characteristics and a high level of reactivity, which can be attributed to their electron configuration. This paper seeks to provide an overview of the relationship between the electron structure and chemical behavior of the Group VII elements found in the periodic table. The primary goals include elucidating how the electron configuration influences the physical …
Published in Emerging Trends in Chemical Engineering · Vol. 12, Issue 2, 2025 · pp. 18–26 Read article
-
Effect of Nano Metal Oxide Loading Rates on Polymer-Nano Metal Oxide Nanocomposites
Abstract: Many industries, such as those in the fields of medicine, textiles, cosmetics, agriculture, optics, food packaging, optoelectronics, semiconductors, aerospace, building materials, and catalysis, utilise nanoparticles and nanocomposites in a variety of applications. A unique class of materials, polymeric nanocomposites outperform their microparticle counterparts by fusing organic polymers with inorganic nanoparticles. Consequently, they ought to advance the field of engineering applications. The presence of inorganic nanoparticles can significantly alter the properties …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 14, Issue 1, 2024 · pp. 1–12 Read article
-
Polymer Chemistry-Driven Design of a Severable Dental Prophylaxis Instrument: Leveraging PEEK and Composites for Enhanced Functionality
Abstract: Polymer chemistry unlocks new possibilities for dental prophylaxis instruments by leveraging molecular design for enhanced functionality. This study explores Polyether Ether Ketone (PEEK), a semi-crystalline thermoplastic, in a novel instrument with a severable working end, featuring a tubular structure with internal screw threads (0.5–0.8 cm) anchoring replaceable elements via a threaded mechanism. PEEK’s aromatic backbone, alternating ether and ketone groups, yields a tensile strength of ~100 MPa, chemical inertness against …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 869–877 Read article
-
Characterisation of FSW Joints of Aluminium and Titanium Alloys: A Review
Abstract: AbstractThis paper presents a review on friction stir welding of different aluminum and titanium alloys. Aluminum alloys are most widely used in automotive, aerospace and ship building industries as high strength-to-weight ratio materials. Titanium alloys are also attractive in these fields due to their high specific strength and good corrosion resistance. In some special applications, the complementary characteristics of Ti and Al are required, such as increased strength, low weight …
Published in Journal of Materials & Metallurgical Engineering · Vol. 8, Issue 3, 2018 · pp. 25–29 Read article
-
Wear Characteristics of Aluminium-Graphite Composites Produced by Stir Casting Technique
Abstract: Metal matrix composites (MMCs) are finding more applications due to their significantly improved properties such as high specific strength, high specific modulus, good damping capacity and good wear resistance compared to unreinforced alloys. In recent years, there has been an increasing interest in composites containing low density and low cost reinforcements. Graphite is one of the most suitable and low density reinforcement available for making light-weight and wear resistant parts …
Published in Journal of Materials & Metallurgical Engineering · Vol. 4, Issue 3, 2014 · pp. 13–20 Read article