Search
71 articles for “frictional coefficient”
-
Comprehensive Study on the Mechanical and Tribological Response of Waste Tyre Rubber–Natural Fiber Hybrid Epoxy Composites
Abstract: Research into the mechanical and tribological characteristics of Prosopis juliflora-fiber reinforced epoxy-matrix composites with recycled tyre rubber particles is the focus of this investigation. Making use of old tire rubber and bio-reinforcing with fibers from the common invasive plant Prosopis juliflora are the goals of the two-reinforcement techniques. The end goal is to produce long-lasting, cost-effective engineered composite materials with improved performance. A constant epoxy resin matrix was used to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 154–161 Read article
-
Development of a Novel Analytical Framework for Investigating Non-Symmetric Deformation Behavior in Strip Rolling
Abstract: In recent years, the asymmetrical rolling process has attracted considerable research attention due to its ability to induce non-uniform deformation characteristics within metallic workpieces. In this context, the present study introduces a novel analytical framework for asymmetrical cold rolling based on an enhanced slab method, specifically designed to overcome the inherent limitations of existing analytical models when applied to a wide range of asymmetric rolling conditions. A newly developed mathematical …
Published in Journal of Experimental & Applied Mechanics · Vol. 17, Issue 1, 2026 · pp. 1–21 Read article
-
Flexural Strength and Drilling Parameter of Natural Fiber Composites with Usage of Epoxy Resin
Abstract: An attempt that has been made to take use of the advantages offered by natural composite materials in light of the fast advancement of research and development in this field over the course of the previous two decades, from the laboratory to the factory floor. During the manufacturing process of laminates, polymer matrices are used, while cotton, jute, and sisal are utilised as reinforcing materials. Epoxy resin is used to …
Published in Journal of Polymer & Composites · Vol. 11, Issue 4, 2023 · pp. 37–45 Read article
-
Effectiveness of PTFE-Based Nano-coatings in Improving Corrosion and Wear Resistance of Stainless Steel
Abstract: Polytetrafluoroethylene (PTFE) has emerged as a highly effective material for enhancing the durability and performance of metal surfaces, particularly in environments requiring superior corrosion resistance and low friction. This study investigates the application of PTFE coatings on various metallic substrates, with a focus on stainless steel and carbon steel, to improve their corrosion resistance, wear protection, and tribological performance. Utilizing advanced deposition techniques such as sol-gel and plasma spray, PTFE …
Published in International Journal of Photochemistry and Photochemical Research · Vol. 2, Issue 2, 2024 · pp. 32–38 Read article
-
Coupled Magneto–Thermal–Diffusion Transport in an Unsteady Maxwell Polymer Fluid with Activation Energy over a Porous Stretching Surface
Abstract: The present study investigates the combined effects of activation energy and diffusion-thermo (Dufour) processes on unsteady magnetohydrodynamic (MHD) flow, heat, and mass transfer of a Maxwell viscoelastic fluid past a porous exponentially stretching vertical sheet. The electrically conducting and incompressible polymeric fluid flows through a saturated porous medium under a transverse magnetic field. The governing momentum, energy, and concentration equations are transformed into nonlinear ordinary differential equations using similarity transformations …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 581–590 Read article
-
Development of a Durable Superhydrophobic EP/PDMS Coating Reinforced with Micro-CaCO₃ and Nano-ZnO for Enhanced Corrosion Protection and Multifunctional Performance on Carbon Steel
Abstract: Balancing exceptional multifunctional performance with mechanical robustness in micro-nano composite films remains a significant challenge for practical applications. In this work, a superhydrophobic coating reinforced with micro-CaCO₃ and nano-ZnO particles was fabricated through a versatile single-step brushing method. The optimized EP/PDMS@micro-CaCO₃/nano-ZnO coating achieved a water contact angle (WCA) of 173.54° ± 2.53° and a sliding angle (SA) of 1.50° ± 1.12°. Owing to its carefully engineered micro-nano hierarchical structure, the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 216–238 Read article
-
Fractional Calculus-Based Analysis of Magneto-Thermal Nanofluid Flow Over Stretching and Shrinking Surfaces
Abstract: This study presents a comprehensive investigation of magneto-thermal hybrid nanofluid flow over stretching and shrinking surfaces using a fractional calculus framework to capture the memory and hereditary characteristics of complex fluid transport phenomena. The proposed model incorporates the effects of magnetic field intensity, thermal radiation, viscous dissipation, Brownian motion, and thermophoretic diffusion on the velocity and temperature distributions within the boundary layer region. A fractional-order derivative formulation is employed to …
Published in Recent Trends in Fluid Mechanics · Vol. 13, Issue 2, 2026 · pp. 1–10 Read article
-
Analysis of Thermodynamic Behavior of a Turbulent Air Flow in a Rectangular Duct
Abstract: Abstract A numerical study of turbulent air flow in a rectangular duct with three plate and waved baffles was investigated. The governing equations, based on the model k-ε realizable used to describe the turbulence, are solved by the finite volume method with the use of the SIMPLE algorithm. The dynamic and thermal structure of the flow was analyzed by the presentation of several parameters, namely, the intensity of turbulence, reports …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 3, Issue 3, 2016 · pp. 14–23 Read article
-
Short Review on Lubrication Coatings and Reduction in Friction
Abstract: Specialized Epoxy coatings with a low coefficient of friction can be applied to metal, glass, and plastic substrates. They produce long-lasting, slick surfaces that prevent wear and abrasion. These friction compounds are corrosion-resistant, chemically inert, and simple to maintain. Products are made to cut down on repair costs and increase element life. The coating is just a protective layer that is put to an object's surface, also known as the …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 8, Issue 3, 2021 · pp. 28–32 Read article
-
Tribological Behaviour of Epoxy-Marble Powder Composite with Taguchi Optimization Technique
Abstract: Epoxy resin strengthened with marble powder particles is prepared by ultrasonic mixing strategy. Pin-on-Disc wear trial of the developed composite is done concurring with Taguchi optimisation. An orthogonal array is displayed and analysed the affecting parameters like fraction of marble powder reinforcement, load, sliding speed and track diameter on the composite. Signal to noise ratio analysis optimises the parametric conditions that yield minimum wear rate, minimum frictional force and minimum …
Published in Trends in Mechanical Engineering & Technology · Vol. 8, Issue 2, 2018 · pp. 110–117 Read article
-
Optical Recording of Flow Phenomena in Photoresist based Microfluidic Devices
Abstract: AbstractIn this experimental work, a set of three individual SU-8 based glass microfluidic devices are fabricated by maskless lithography and indirect bonding technique without having any microfluidic leakage. Dyed ethanol (10% ethanol, 90% red dye) is prepared and used as dyed working liquid. The microfluidic leakage is observed in other set of two leaky microfluidic devices due to improper indirect bonding technique. The effect of surface-to-volume ratio on surface-driven capillary …
Published in Trends in Opto-electro & Optical Communication · Vol. 10, Issue 1, 2020 · pp. 36–42 Read article
-
Nanostructured Cr-WS2 Solid Lubricant Coating for Space Applications
Abstract: Abstract Tungsten disulphide (WS2) is one of the widely used intrinsic low friction materials, which is commonly used in the form of coating. WS2 offers very low coefficient of friction only in non humid conditions. Presence of humidity destroys this property and restricts its utility. Modifying the structure of WS2 by adding certain metals helps in overcoming this limitation and in addition improves the mechanical properties. Further, deposition technique and …
Published in Journal of Instrumentation Technology & Innovations · Vol. 9, Issue 1, 2019 · pp. 12–18 Read article
-
Finite Element Modelling of Contact Stresses in Helical Gear Systems
Abstract: Helical gears are widely used in modern power‐transmission systems because of their high load‐carrying capacity, smooth meshing action, and increased overlapping of gear teeth. However, the design of helical gear pairs is constrained by contact stresses generated at the mating tooth surfaces, which can lead to surface fatigue (pitting), micro-cracking, and ultimately gear failure. Traditional analytical methods, such as those of the American Gear Manufacturers Association (AGMA) or International Organization …
Published in Trends in Machine design · Vol. 12, Issue 3, 2025 · pp. 35–39 Read article
-
Experimental Investigation of Micro-Hardness & Tribological Behavior of Composite Coating for Wear Resistance Application
Abstract: The author effectively created a composite coating with enhanced durability utilizing the HVOF technique in this investigation. The automobile business has encountered fierce worldwide rivalry, rapid technical breakthroughs, and strict regulatory regulations in recent year.. Producers of lubricants, gasoline additives, and worldwide original equipment manufacturers (OEMs) are striving to address the difficulties presented by changing consumer preferences and emerging energy conservation and environmental protection regulations. We have successfully created and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 1097–1103 Read article
-
Analysis and Improvement in Tribological Properties of Coated HSS Tool
Abstract: The use of low friction coatings like TiAlN and AlCrN is to improve the tribological properties of tools for metal cutting, forming and machine elements. It is strong scientific interest to conduct fundamental tribological research on the materials that exhibits low friction and can be used for surface coating on surfaces to rub against with reduced friction and wear. Parameters influence the quality of the products in turning process. The …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 5, Issue 1, 2018 · pp. 23–36 Read article
-
Investigation and Evaluation of Wear Characteristics of A Nonmetallic Spur Gear
Abstract: A thermoplastic composite material designed and developed for fabrication of nonmetallic composite spur gear. The composite is fabricated using Portland Pozzolanic Cement (PPC) as filler material into the polypropylene matrix followed by injection molding technique. However, geometrical structure of the developed product depends on the parameter like loading-unloading condition and temperature fluctuation that severely influence the material performance and shorten the product life. In the present work, the composite spur …
Published in Trends in Machine design · Vol. 1, Issue 3, 2014 · pp. 73–78 Read article
-
Tribological Behaviour of En 31 Bearing Steel Against Altin, Alcrn and Crn Coated High Speed Steel
Abstract: Mechanical parts like bearing in modern machining systems are often subjected to wear and friction causing high heat generation at the interacting zones leading to reduced lifecycle and increased energy consumption of machinery. In this investigation friction and wear characteristics of bearing material EN31 steel against the CrN, AlCrN and AlTiN deposited on high speed steel as counter material is presented. Tribological tests are conducted on a pin on disc …
Published in Journal of Polymer & Composites · Vol. 9, Issue 2, 2021 · pp. 97–108 Read article
-
Friction and Wear Response of CottonSeed Oils and Esterified CottonSeed Oil and their Blends with Mineral Engine Oil in a Reciprocating Sliding Contact at Severe Contact Conditions
Abstract: Many studies investigating the tribological performance of pure cottonseed and other bio-based oils have been conducted; a better understanding of vegetable oil tribologicalperformance at extreme conditions is still required. Little work has been carried out to studythe effect of vegetable oils on the performance of a lubricant formed from a blend ofcottonseed oil and conventional mineral engine oil. This work presents the tribologicalperformance of esterified cottonseed oil, and their blends …
Published in Journal of Automobile Engineering and Applications · Vol. 6, Issue 2, 2019 · pp. 20–35 Read article
-
Experimental investigation of thermally grown Indium film’s structural and tribological properties
Abstract: Indium thin film growth found numerous applications, such as cold welding of infrared detectors and readout-integrated circuits (ROIC) to form sensor chips. In film is grown on the Si substrate by thermal evaporation. The XRD results indicated the tetragonal bcc phase in the (101) preferential plane. Scanning electron microscopy (SEM) indicated an uniform, continuous film covering the whole surface. The EDS examination confirmed the pure In film. The atomic force …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 58–66 Read article
-
Experimental Investigations on Aluminium Composites Materials Using Stir Casting Process
Abstract: In physical operations, accoutrements in motorcars and aeronautical machine factors, aluminium and its alloys are extensively used. In this study an effort is made to ameliorate the properties of aluminium essence matrix compound (A356) for manufacturing of machine rudiments taking High Tensile strength, Hardness, Wear resistance and low coefficient of friction, aluminium alloy (A356) reinforced with aluminium oxide, graphite and silicon carbide. In the current work, A356 as base metal …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 302–323 Read article